have you thought about making a video on comparing all of your bcar? Testing perimeter would be using same blaster, fresh darts for all then to compare and contrast their accuracy and how much fps drops.
This is some very impressive performance. Especially considering windy conditions. FPS issue is interesting. Regarding the range I was expecting that the heavier darts will do better against air resistance and wind. Same goes for heavier BBs when your replica shoots more fps in airsoft. Anyway.... Worker Kunlun !!!! Dude I will wait impatiently for you to get it and review it 😎
I grabbed a box of the "light" darts from Jay @ FoamWork a couple weeks ago and they are AMAZING. With worker darts they were lucky to survive as few as 3 shots before they would decap. Even with the Storm (with long barrel and thicc spring) I have yet to have a decap and some of these darts have done a dozen cycles so far. Yes occasionally Mr Storm gets cranky and straight up eats one but it does that to all darts. On top of that their consistency is Amazing too. I cannot see myself buying any more worker darts as long as these are on the market
Would be sick to see darts leaving a BCAR in super slowmo - do they actually spin, do they wobble, do then only spin for a short time, do different BCARs affect the dynamics, etc.. anyway hope you're doing well legend.
Hi Brad Very interesting findings regarding the velocity differences between the Heavies and the Stds ( Basically the same ) Makes you wonder what an even heavier dart will do? - Would love to see a 1.6 gram Extra Heavy dart made by Sabre. This would still perform amazing in High powered Blasters and have even better wind bucking performance. See if Sabre will make some Prototypes. I would buy some.
For distance and accuracy: Air resistance, previous darts are simply too light, like trying to shoot feathers out of your blasters. For muzzle velocity firmer foam will be the factor, yes
You mentioned a 37mm length but on Out of Darts it lists them as 39mm, which is correct? Also, will you ever be able to test Dart Zone's new Nitroshot + 3 ribbed Bamboo dart?
@@BradleyPhillipsYT You've got a point there, these T darts are amazing. The information I do have on them is that the nitroshot +s are 37mm and weigh around 0.96g, so they definitely are not as accurate. Still not the #1 darts period as Dart Zone always somewhat arrogantly claims.
@@lukylunacek7444 My group switched over to Joules, which just translates to a variable speed cap based on weight. But I think it'd be easier to just standardize testing and make everyone chrono with regular 1g darts, then they can switch to whatever they want, assuming they don't change their setup
I know this video was a while ago, but do you know what scope you used on the worker seagull in your mod video of the blaster? Love your videos keep up the great work!
Man, this is unbelievable. I ordered this heavy T-darts from link you provide. Delivery in Germany costs more than darts themselves. Plus German Taxes system charged me 13 euro more. All together this darts cost me up to 60 euro. Today I tested them on my Nexus Pro X. They flay little bit more far than Worker (which I also bought from your link), but even less accuracy than Worker. Worker themselves less accuracy than green Bamboo with blue cup with holes, that were delivered with bluster (also used your link). So, distance for Nexus Pro X will be rising with more heavy darts, but accuracy is upside down! Thus Worker is flying more than Bamboo, and T-darts more than Worker. But accuracy from 15 meters is 10/10 for green Bamboo aiming small plastic glass. While Worker will do 4/10, and your so called best accuracy T-darts 3/10. What should I do now with 400 darts I don't like (200 Worker 1g and 200 T-darts 1.3g)?
@BradleyPhillipsYT I knew that you will suggest it. But with accuracy 10/10 I already found darts I need. Currently I'm using standard rifling with small wheels delivered with bluster. Might be it's too much spin for other more heavy darts. But with bamboo it works excellent. If you know someone in Europe who needs mentioned darts I can sell them. Somebody can save on delivery from Canada. Thank you.
Hmmmmm. I am gonna pick up a box when they're available in the us, but I'm still a skeptic kuz people in my group cannot stop talking sh*t about the sabre darts they they tried them at arma. Aaronplinks also did a video with both the 1g and 1.3g and he didn't get nearly as consistent results with them, although I would say they are arguably on par with the blue darts and rumblings that he considered to be better based on his video. I guess whenever they come in stock, we'll see.
Sabre 1gram Tdarts (USA): outofdarts.com/products/sabre-t-darts-standard-weight-short-darts-200-pack-1-0g?ref=RIa3bVI3vXYhUs
Sabre 1gram Tdarts (AUS): www.foamwork.com.au/product/sabre-tdarts-1-0-pre-order/52?cp=true&sa=true&sbp=false&q=false
Sabre 1.3gram Tdarts (USA): outofdarts.com/products/sabre-t-darts-heavyweight-short-darts-200-pack-1-3g?ref=RIa3bVI3vXYhUs
Sabre BCAR (USA): outofdarts.com/products/sabre-metal-bcar?ref=RIa3bVI3vXYhUs
Sabre BCAR (SG): springblasters.com/products/sabre-spiral-scar-1?_pos=1&_sid=7cd553819&_ss=r
Apex Prime (USA): outofdarts.com/products/sabre-apex-prime?ref=RIa3bVI3vXYhUs
Apex Prime (AUS): www.foamwork.com.au/product/ApexPrime/23
Apex Prime (EU): www.blaster-time.eu/shop/sabre-apex-prime
Apex Prime (SG): springblasters.com
Dart Zone Max Solo (TAIWAN): facebook.com/Breakice.today
or Email breaktheice1986@gmail.com
have you thought about making a video on comparing all of your bcar?
Testing perimeter would be using same blaster, fresh darts for all then to compare and contrast their accuracy and how much fps drops.
9:08 did bro just call out @WalcomS7 along with most American foam flingers?!
Regardless of who it's directed at, the critique makes sense. Makes more sense to test outside or in an indoor setting made for nerf.
Walcom does do range tests outside and you get an idea of accuracy when he does that
@@akagainesynot as good as Brad
1:36 When it's cold out
This is some very impressive performance. Especially considering windy conditions.
FPS issue is interesting. Regarding the range I was expecting that the heavier darts will do better against air resistance and wind. Same goes for heavier BBs when your replica shoots more fps in airsoft.
Anyway.... Worker Kunlun !!!! Dude I will wait impatiently for you to get it and review it 😎
Wow!! I'm gonna have to check these darts out!
I grabbed a box of the "light" darts from Jay @ FoamWork a couple weeks ago and they are AMAZING. With worker darts they were lucky to survive as few as 3 shots before they would decap. Even with the Storm (with long barrel and thicc spring) I have yet to have a decap and some of these darts have done a dozen cycles so far. Yes occasionally Mr Storm gets cranky and straight up eats one but it does that to all darts. On top of that their consistency is Amazing too.
I cannot see myself buying any more worker darts as long as these are on the market
Would be sick to see darts leaving a BCAR in super slowmo - do they actually spin, do they wobble, do then only spin for a short time, do different BCARs affect the dynamics, etc.. anyway hope you're doing well legend.
I love heavies, that's what I use mostly for higher power blasters.
Such great work
Hi Brad
Very interesting findings regarding the velocity differences between the Heavies and the Stds ( Basically the same )
Makes you wonder what an even heavier dart will do? - Would love to see a 1.6 gram Extra Heavy dart made by Sabre.
This would still perform amazing in High powered Blasters and have even better wind bucking performance. See if Sabre will make some Prototypes. I would buy some.
Just a heads up. The 1g are actually 1.1g
For distance and accuracy: Air resistance, previous darts are simply too light, like trying to shoot feathers out of your blasters.
For muzzle velocity firmer foam will be the factor, yes
Thanks for the excellent video. Just wondering why you don't use the Storm for testing anymore?
@@peterk8131 my Storm has been with Foamwork for a while waiting for upgrades such as ammo counter etc
You mentioned a 37mm length but on Out of Darts it lists them as 39mm, which is correct? Also, will you ever be able to test Dart Zone's new Nitroshot + 3 ribbed Bamboo dart?
@@NateBenson-s6i they're more like 37.5mm
@@NateBenson-s6i will see if I can get hold of those Dart Zone bamboos but I doubt they're worth comparing against these
@@BradleyPhillipsYT You've got a point there, these T darts are amazing. The information I do have on them is that the nitroshot +s are 37mm and weigh around 0.96g, so they definitely are not as accurate. Still not the #1 darts period as Dart Zone always somewhat arrogantly claims.
I always prefer Heavy, makes sure you are under fps cap without being limited too much.
At the games here all blasters are tested with the same darts. Lower fps with heavier darts still gives same or more energy. You are just cheating.
That is why in airsoft we use Joules instead of FPS now. As there are more weights of darts available, I think nerf or dartsoft should do the same.
@@lukylunacek7444 Good idea.
@@lukylunacek7444 My group switched over to Joules, which just translates to a variable speed cap based on weight. But I think it'd be easier to just standardize testing and make everyone chrono with regular 1g darts, then they can switch to whatever they want, assuming they don't change their setup
3:05 hahahaha
Waiting for kunlun review and accuracy test :)
The red one are my favorite
They definitely seem to perform the best, plus the colour is more visible!
@@BradleyPhillipsYT 3:05
I know this video was a while ago, but do you know what scope you used on the worker seagull in your mod video of the blaster? Love your videos keep up the great work!
Either my holosun hs506 or one of Novritsch's LPVOs
@@BradleyPhillipsYT thank you!
Bought 3 boxes instantly 😂
😂😂😂 love the fbomb
Where did bro go?
Will you check out the stryker 2.0?
@@Zetson2952 don't plan to, isn't it just a Nexus Pro X with a drum thrown in?
@@BradleyPhillipsYT3:05
HOLY POOP!!!!!😱😱😱😱
What do you do with your blasters to get such consistent FPS mine is all over the place
@@lavatsunami_gaming9288 both blasters are unchanged as they came out of the box / after assembly
what city are you based in?
700 mm barrel for 300fps is a bit nuts
Man, this is unbelievable. I ordered this heavy T-darts from link you provide. Delivery in Germany costs more than darts themselves. Plus German Taxes system charged me 13 euro more. All together this darts cost me up to 60 euro. Today I tested them on my Nexus Pro X. They flay little bit more far than Worker (which I also bought from your link), but even less accuracy than Worker. Worker themselves less accuracy than green Bamboo with blue cup with holes, that were delivered with bluster (also used your link). So, distance for Nexus Pro X will be rising with more heavy darts, but accuracy is upside down! Thus Worker is flying more than Bamboo, and T-darts more than Worker. But accuracy from 15 meters is 10/10 for green Bamboo aiming small plastic glass. While Worker will do 4/10, and your so called best accuracy T-darts 3/10. What should I do now with 400 darts I don't like (200 Worker 1g and 200 T-darts 1.3g)?
@@CommandAndConquerGeneralPaulus try different rifling
@BradleyPhillipsYT I knew that you will suggest it. But with accuracy 10/10 I already found darts I need. Currently I'm using standard rifling with small wheels delivered with bluster. Might be it's too much spin for other more heavy darts. But with bamboo it works excellent. If you know someone in Europe who needs mentioned darts I can sell them. Somebody can save on delivery from Canada. Thank you.
Hmmmmm. I am gonna pick up a box when they're available in the us, but I'm still a skeptic kuz people in my group cannot stop talking sh*t about the sabre darts they they tried them at arma.
Aaronplinks also did a video with both the 1g and 1.3g and he didn't get nearly as consistent results with them, although I would say they are arguably on par with the blue darts and rumblings that he considered to be better based on his video.
I guess whenever they come in stock, we'll see.
How did you get a proper stock on the apex?
@@RailsandTales-kj4jn it accepts AR buffer tubes
I i thought heavy worker darts were already very good, lol
Sadly they lost production quality over the last few months. If you sort out a new box for the good ones they still perform very good.
They were good in comparison to what we had available. They were better than Dart Zone for example.