Hi, I have a GTI variant of this Polo. How bright are they in LUX? Have you measured it? I currently have Leds. Can I buy the projector housing only without the xenon bulbs and ballasts? I want to fit Leds in them if that is possible. Thanks. 😃
Is het misschien niet handig om eerst de oude 'permaseal' helemaal te verwijderen met wat schuurpapier ofzo ? afwerking ziet er niet zo mooi uit moet ik zeggen..
Hello! Nice job with the project. Can you please tell me the dimension of the Bi-xenon projector. In my country it is available in 2 dimensions 2.5inch and 3.0inch. Thank you! keep it up!
Hi, we have upgrade kit only for halogen headlight (original current headlight), if your headlight is Halogen, you can visit this link retrofitlab.com/collections/volkswagen-polo-9n
Nice video man ! It's great job ! I have a question, may you do a retrofit for a peugeot 207 ? :) It's my car and i like see how do a retrofit for her. It's french car, so i don't know if you do on that. ps: i'm afraid but i'm sorry for my poor english. thanks for your reply :) EDIT: i search on your website: www.retrofitlab.com/xenon-koplamp-database.html#PEUGEOT But it's empty for my car, maybe you know the bulb for peugeot 207 ? Thanks for your reply, and carry on your job, it's amazing !
***** Thanks for your reply. Do you know if i need something with that for my retrofit ? www.retrofitlab.com/en/xenon-projectors-1/mini-h1-bi-xenon-projectors-60-1.html
Maakt het nog uit welk merk lampen je hebt? Ik dacht te hebben gelezen dat het alleen kan met de Bosch lampen omdat hier de lijm goed van los te krijgen is. Ik heb in mijn 9N3 Hella lampen zitten en hier schijn het niet mee te kunnen. Kunnen jullie daar meer over vertellen?
***** Heb je misschien iets van advies, of een handleiding, hoe ik dit het beste kan aanpakken? Ik zat al te kijken voor tweedehands Bosch koplampen, maar die zoektocht heeft nog niets opgeleverd helaas.
There is no need to remove the entire bumper, however, you will have to unscrew some bumper screws to make a little space for the headlight to come out. There are several video's online that will show you how this can be done.
Without heat it's not an option. In general, 2 methods are used, with both methods, be careful and patient. Method 1 is using a regular oven. Preheat the oven at 200 degrees Celsius. When ready, switch off the oven and place the headlight inside. Make sure that the headlight is not touching any metal of the oven by placing a cloth over the grid, for example. Leave the headlight in the oven for 10-15 minutes before opening it. If the headlight kit is not yet soft enough, put the headlight in the oven for a bit more time. Method 2 is suitable for larger headlights that do not fit in a regular oven, or if your lovely wife absolutely does not allow car parts to be baked in her kitchen. A large cardboard box is used where hot air is blown through a heatgun. Make sure that the hot air of the heatgun does not blow directly to the headlight, place the headlight on small elevations so that the air can circulate properly through the box. We use a setting of 300 Degrees Celsius for 12-18 minutes / 1st lowest setting, depending on the size of the headlight.
Retrofitlab.com hi thanks for the reply, how do I ensure that the projector is actually positioned the right way up so I don’t have an upside down or wonky beam pattern?
@@Zeebean384 When you have the projectors it will be quite easy. There is writing on them, the solenoid needs to be at the bottom and the mounting rings only fit one way.
That black plastic dont look so good afterusing the screwdriver. Therer is no other way?
Hi plz can you tell me what is the name of the standard lights in the polo 9n3 are they H7 ^^?
pd: very nice job!!! thanks and regards!
Hi, I have a GTI variant of this Polo. How bright are they in LUX? Have you measured it? I currently have Leds. Can I buy the projector housing only without the xenon bulbs and ballasts? I want to fit Leds in them if that is possible. Thanks. 😃
Thanks for your questions! :) Please send an email to info@retrofitlab.com so we can give you personal advice. :)
Is het misschien niet handig om eerst de oude 'permaseal' helemaal te verwijderen met wat schuurpapier ofzo ? afwerking ziet er niet zo mooi uit moet ik zeggen..
Why didn't you use a bigger shroud, the projector feels lost in the reflector
okay then, good job anyway (y)
as it is called the plastic used for splicing cables "in the 2:32 minute video" ???
Where do I go to order a retrofit job on my headlights ? Where can I see the pricing
Nice vid
Good job
Thanks!!
Hi i need make it in my car Polo 2007 BR What is the brand of the projector i use to h7 light?
How Many Grades the Trimmer Have to Stay
Hello! Nice job with the project.
Can you please tell me the dimension of the Bi-xenon projector. In my country it is available in 2 dimensions 2.5inch and 3.0inch. Thank you! keep it up!
Retrofitlab Thank YOU ! I am about to Open the lighthouse and buy the bi-xenon , very explicit video ! Best regards !
can you please do a nissan altima 2010 sedan
Hello I'm french , for my polo 9N3 , I would buy your kit on Your Site Add- Ons In > Wire harness > ? What should i choose ?
Okai thank's :D
Ciao, dove posso comprare i lenticolari della Vw Polo 9n3? grazie
what size of projector?
Because of the small reflector and H7 base, a 2,5" projector
Hi, do you still have these available on your website??
Hi, we have upgrade kit only for halogen headlight (original current headlight), if your headlight is Halogen, you can visit this link retrofitlab.com/collections/volkswagen-polo-9n
Nice video man ! It's great job !
I have a question, may you do a retrofit for a peugeot 207 ? :) It's my car and i like see how do a retrofit for her.
It's french car, so i don't know if you do on that.
ps: i'm afraid but i'm sorry for my poor english. thanks for your reply :)
EDIT: i search on your website: www.retrofitlab.com/xenon-koplamp-database.html#PEUGEOT
But it's empty for my car, maybe you know the bulb for peugeot 207 ?
Thanks for your reply, and carry on your job, it's amazing !
***** Thanks for your reply. Do you know if i need something with that for my retrofit ? www.retrofitlab.com/en/xenon-projectors-1/mini-h1-bi-xenon-projectors-60-1.html
Hello I have a Polo it has the Same Headlights how much would these Xenon Headlights cost to make and Possible give İt a Black Look
Where would I get that cutting blade at? The one used when opening the light? Been looking for something like that
Maakt het nog uit welk merk lampen je hebt? Ik dacht te hebben gelezen dat het alleen kan met de Bosch lampen omdat hier de lijm goed van los te krijgen is. Ik heb in mijn 9N3 Hella lampen zitten en hier schijn het niet mee te kunnen. Kunnen jullie daar meer over vertellen?
***** Heb je misschien iets van advies, of een handleiding, hoe ik dit het beste kan aanpakken? Ik zat al te kijken voor tweedehands Bosch koplampen, maar die zoektocht heeft nog niets opgeleverd helaas.
Where are located i need this 😮
In The Netherlands, it's not an easy retrofit, but with some patience it is definitely doable :-) retrofitlab.com/collections/volkswagen-polo-9n
ciao sono un nuovo iscritto ti vorrei fare una domanda.per caso nei fari che hai modificato è entrato acqua?
wath name of wires to set up, low beam to hight? thanks
How many degrees around the box.
Do you have to remove the hole bumper to do this?
There is no need to remove the entire bumper, however, you will have to unscrew some bumper screws to make a little space for the headlight to come out. There are several video's online that will show you how this can be done.
Parabéns
how can i contact you ? for professionnal Relationship ?
Eww
Hi, how can the plastic cover be removed without a heat gun?
Without heat it's not an option. In general, 2 methods are used, with both methods, be careful and patient. Method 1 is using a regular oven. Preheat the oven at 200 degrees Celsius. When ready, switch off the oven and place the headlight inside. Make sure that the headlight is not touching any metal of the oven by placing a cloth over the grid, for example. Leave the headlight in the oven for 10-15 minutes before opening it. If the headlight kit is not yet soft enough, put the headlight in the oven for a bit more time.
Method 2 is suitable for larger headlights that do not fit in a regular oven, or if your lovely wife absolutely does not allow car parts to be baked in her kitchen. A large cardboard box is used where hot air is blown through a heatgun. Make sure that the hot air of the heatgun does not blow directly to the headlight, place the headlight on small elevations so that the air can circulate properly through the box. We use a setting of 300 Degrees Celsius for 12-18 minutes / 1st lowest setting, depending on the size of the headlight.
Retrofitlab.com hi thanks for the reply, how do I ensure that the projector is actually positioned the right way up so I don’t have an upside down or wonky beam pattern?
@@Zeebean384 When you have the projectors it will be quite easy. There is writing on them, the solenoid needs to be at the bottom and the mounting rings only fit one way.
Can you make for renault clio 2?
=)))
anyway...now i'm waiting for a clio owner, to send his lights to Retrofitlab =)))
thanks ;) good work