20 Jigsaw Tips for Beginners
ฝัง
- เผยแพร่เมื่อ 26 ก.ย. 2024
- 20 Jigsaw Tips for New DIYers
We have had a lot of new people come into the DIY community, and we wanted to help out many of those new to these tools. Many of these tips are simple but I wish I had been taught these back when I first started working with the jigsaw.
+
Power Tool Tips for Beginners Playlist
• Power Tool Tips for Be...
100+ Workshop Tips and Tricks Playlist
• Workshop Tips and Tricks
100+ French Cleat Ideas Playlist
• French Cleat Ideas for...
10+ Ways to Prevent Plywood Tearout
• 10+ Ways Prevent Plywo...
7+ Awesome DIY Sawhorses
• 7 of the BEST DIY Sawh...
+
If you would like to help support our channel, please use our affiliate page on Amazon (paid link), were we have listed a bunch of items we suggest.
Just follow this link:
Amazon Product Suggestions:
www.amazon.com...
(There is NO extra cost to you.)
+
Your results may vary depending on type of materials, your craftsmanship, and tools at hand. We are not responsible for any damages or injuries that might occur. Use of video content for personal projects is at your own risk.
Some links in description are affiliate links that let you help support our channel at no extra cost to you.
Music from TH-cam library.
#jigsaw #woodworking #tipsandtricks
2 Corinthians 5:17
Dude amazing jigsaw tutorial…I’ve seen a few but this one hits every question I was having when trying it out for the first time. And it was super concise. Thanks!!!
@@Ackbarfangirl correct!! Literally answered every question I had as a first timer and more. 👍🏾💯
1) With a T shank blade (never tried with a U shank) you can put it in backwards and pull the jigsaw instead of push it. This can be handy for cuttin a hole in tight spaces like in cabinets or near walls or between or in floor joists. 2) you can cut a slot in plexiglass and use double stick tape the plexiglass to the base plate. In doing so you create a 0 clearence base plate which prevents tear out. 3) Keep in mind the tear out happens where the teeth are pointing.
Handy tips, Lincoln, thank you!
Brilliant. I'm going to do this now to cut a hole in a panel under my sink that I've previously just had to tear bits off to get some hoses in there. Thank you.
Some were a refresher, some were new. Thank you for all 20. Especially liked how to use painter’s tape to protect the piece you’re working on.
Thank you Louis
I really liked this a LOT! Just starting some new projects with new tools after giving it up after selling my homes. Saving this to refer to. Your explanations were not only clear and concise but you are a very cheery fellow. Thank you!
That is very kind of you to say, thank you very much
I agree. I just stumbled on this video and now I'm subscribed. I really love his style and I think I'm gonna be quite happy here.
Thank you for all the useful info. I really appreciate how you explain & present it all. I have a jig saw but haven't used it very often because I found it difficult. With your tips, especially about how to start on the edge of your piece, has solved the issue. Thanks so much!
Excellent! I think you solved why my new jig saw cuts rough (orbital setting)
Thank you for this
Thanks for the tips. I learned a couple of new things. I laughed at "Safety First" as it was the last tip presented. :-)
Awesome! I have 2 but both are corded. The Firestorm has a laser light and is a nice little saw. The other is a plain jane Mikita and it is fine for just plain straight sawing. I am still a rookie on all power tools, my late husband was the one who made beautiful things. It helps so much to know where I can go to learn about these tools! Thank you!!
Hello my friend, Unless you try what's new, you can't learn anything new. And you are always trying to teach innovations. And you always produce innovative works and ideas. Thank you for sharing. See you. Big greetings.
Should have watched this BEFORE I started not knowing what the heck I was doing. Oh well, not too far in, so I can still take advantage. Great tips, thanks!
Thanks for this video. It’s by far the best one I’ve found for jig saw newbies like me
Great video! I wish I had watched this about two years ago. Oh, well. Live and learn.
Nice video very informative
A very handy video, plus some very good TIPS. THUMB'S UP ALL DAY LONG, thank you.
Thanks again for making this series of back to the fundamentals videos. Keep up the great teaching!
I'm not quite a beginner but this was a very good video and I thank you for good presentation and information
You're very welcome!
Duuude thanks for all the sharing content. Since I bought my first house few months ago and started to do stuff by myself, I've been learning toooons from you. CheerS!
Love this video. Best I’ve seen about jigsaws.
Good tips and interesting seeing newer jigsaw features. I've only used cheap and old jigsaws (for 40+ years) so some new stuff for me.
great tips. but the 1st tip that I would suggest is to remove the battery before touching/changing the blade
I have learned a lots today Thank you for your experience you have helped me with saw tips.
I just love your personality your joy and your zeal for your tools thanks for the information this is a wonderful tutorial 👍👍😁 great tips for beginners this is awesome.
Thank you again Rhonda
Thank you for the tutorial!
Thank you great info. I fix cars but I love woodworking.
I needed this so thank you so much !!
there are actually jigsaws that have a slow start build in. i think makita does that. it basically always starts the blade slow, and as soon as the machine feels a cut, it speeds up. its a very nice feature.
I did not know about that, thank you
Perfect little vid. thanks for the tips
Thank you for your excellent video.
Love the fails at the end!
Great info for noobs like moi.
Gloves, I like gloves to give me more confidence in safety. Thin suede or leather.
thanks for sharing!
Love this series!
New subscriber! I appreciate the great video. Thank you and I'll be seeing you around more. 😊
Great tips
Great video leaving a comment for the algorithm
Thanks for that!
Thanks man
Try not having anything at all under your cut line. A Black and Decker portable workbench/vise has a gap in between the jaws. Works a treat.
gr8 tips.
It is sometimes valuable to start your cut with a fine hand saw before putting your jigsaw into that kerf.
Great video, I don’t know but I 😅am never be able to cut it straight, even with a guide, blade always run straight then start twisted
Question, should the gap of the roller guide be larger than the thickness of the blade or should it be as thick as the blade? In my machine, the roller has a gap a bit wider than any blade I have. Thanks in anticipation of your reply.
Great video, thank you. I'm still pretty new to woodworking, and have trouble cutting tight curves and circles. You mention using relief cuts, which sounds like a good idea and something I intend to work on. But are there other ways to cut curves and circles more accurately?
You might need to build a jig to cut accurate circles.
@@SpecificLove7 Yes, good idea. I bought one but there is so much play in it that it's worthless.
Wish I saw this video about 30 minutes ago. #9 would have saved a bit of sanding.
I’ve been waiting weeks, literally, to find out which tool can help me cut out the center of wood pieces without me having to buy an expensive band saw. Thank you!!!
Meant to say expensive scroll* saw.
Nice video. Next time start with that safety first suggestion. Thank you.
I was a bit confused on how to remember the up cut and down cut direction of the blades and which side to hold the U or T part (left or right). The video shows the blades horizontally. If I hold or lay it vertically and visualize it in the jigsaw, I can more clearly see the direction of the teeth.
Thank you…as I was watching this FedEx drooped off my Ridgid jigsaw I ordered from Home Depot😄
Wow, that's perfect timing!
Hello, do u have any diy project for adjustable bed back rest pvc
When using a corded jigsaw always be aware of where the cord is
Yes, that is very true
The width of the blade also determines the radius of the cut
Very good point, thank you
Thanks for showing new tips.as always. Ps what size of blade for different jigsaw?🍻👍
I'm sorry, I don't understand what you are asking.
Can I.buy any size of blades for.my jigsaw?
As long as you buy the blades with the correct top connection, then any size blade should work. If you are not sure, then check with the manufacturer guidelines.
Some great tips there, Thanks.
I was expecting on the bloopers at the end the part were you took out the blade in two seconds, i thought it might get stuck coming out or the blade wasn't tight? you must have got it right first go, or did you?????
Stay Safe,
Barry (ENG)
That would have been a very funny blooper, but that was the first take. If it would have happened, I would have definitely put it in a bloopers 😁
Sir, im about to cut a 2 inch hardwood with my jigsaw. Is it possible? My bandsaw is too small foe the design im working on now. This is a company signage. The small one i waa able to cut with my bandsaw and scrollsaw, the size of this is 4 feet by 1.5 feet and its pinewood so it wasnt much of a problem. The other one is a 3 meters by 1 meter signage (same design/company) and its hardwood
You can lube a metal sole plate with paste wax.
I don't know why you keep touching that blade while jigsaw is on , good tutorial tho
Again, stick painters' tape to your cut line to stop tearout.
It's better to make those right curves with a router or hole saw.
Just like the "up cut" and "down cut" blades. They also sell blades that are a couple inches longer. So you can cut into softwood that's close to 3 inches thick. However I still wouldn't recommend cutting into real thick hardwoods.
Great to know, thank you
I use the angle cut function all the time. Don't have a miter saw yet though, so I'll probably use it a lot less when I have the saw that's designed for those cuts.
These Oforipanyin people are very smart and scheming people. This man must be careful before they hunt him down
Thank you, I definitely need to use a square for my project, interlocking notches and I
Just can’t get them straight so am unhappy with the result.!
If you own a battery tool you need to buy extra batteries.
eBay & Amazon have 3rd party batteries for cheap. I
have NEVER had any trouble with them. Keep all your
batteries charged. When 1 dies IMMEDIATELY put in
the charger. Put in another battery & go back to work.
My Ryobi 18 I have 3 batteries. My Milwaukee M12
I have 4 batteries. Build your self a charging station.
Mine is on the wall in my shop.
!
Novices shouldn't grab a freshly used blade. They can be kind of hot.
You are definitely correct
you are talking so fast I can't go through this whole video. When you're teaching something you shouldn't be talking right past, you need to speak at a speed where people can absorb what you're saying. Thanks. 0:18
This played at school awhile ago and it was easy to understand the best part about videos is that u can slow it down and rewatch if u need it
Hi my jigsaw only works in a perpendicular position,when I tilt it horizontal it loses power and stops... help!
New Subscriber 🙂 Thanks for sharing your expertise..
Thanks For The Great Info!!!!! 👍😎
Thank you
I have a Milwaukee M12 version and my main dislike is that it was difficult to follow my pattern because the woodshavings kept blocking my view.
It was my first time using it but I didn't like this I will have to see if attaching a vaccine for dust collection will make this more bearable