I honestly can't believe this machine has managed to last three months full of stress tests so far and it's still fully working. Whirlpools are tough machines 💪
Well it won't pump the water out and you'd need to program the machine to agitate like a top loader in order for it to be effective. Also front loader bearings aren't designed to be submersed all the time. But it would be fun though!
There are machines sold with tilted drums. Niche and not common these days. The idea is reduce depth while not reducing much size of the drum. I don't know whether wash quality is affected by tilted drum?
the only downside i have experienced is when it's doing the initial load saturation without the jet, the front and centre of the load doesn't really get wet until the jet comes on (which on my zanussi IZ161W is just before it starts heating and sometimes while heating, cycle and load dependent). on horizontal axis machines load saturation is much quicker.
@@thelaundrycookie1200 that's not a big deal. I could not see much problem with wash action. But what about the durability of bearings. Since its off-axis.
apparently it puts more stress on the bearings. couldn't tell you for certain though as my IZ is 19½ years old and its bearings are still fine overall. although the bearing seal is totally dead, the bearings themselves are still smooth and quiet even at 1600rpm.
I honestly can't believe this machine has managed to last three months full of stress tests so far and it's still fully working. Whirlpools are tough machines 💪
same design as new lg drum😂 can you wash it by turning it completely sideways ??
Make it like a toploader
Well it won't pump the water out and you'd need to program the machine to agitate like a top loader in order for it to be effective. Also front loader bearings aren't designed to be submersed all the time. But it would be fun though!
Next experiment washer are you gona do whirlpool fresh care+?
There are machines sold with tilted drums. Niche and not common these days. The idea is reduce depth while not reducing much size of the drum. I don't know whether wash quality is affected by tilted drum?
as someone who owns a machine with a tilted drum i can tell you the wash performance is still great.
@@thelaundrycookie1200 are there any downsides compared to a horizontal axis? why aren't they more popular
the only downside i have experienced is when it's doing the initial load saturation without the jet, the front and centre of the load doesn't really get wet until the jet comes on (which on my zanussi IZ161W is just before it starts heating and sometimes while heating, cycle and load dependent).
on horizontal axis machines load saturation is much quicker.
@@thelaundrycookie1200 that's not a big deal. I could not see much problem with wash action. But what about the durability of bearings. Since its off-axis.
apparently it puts more stress on the bearings. couldn't tell you for certain though as my IZ is 19½ years old and its bearings are still fine overall. although the bearing seal is totally dead, the bearings themselves are still smooth and quiet even at 1600rpm.
i love those whirlpools cos if the power goes out then u just wait a few minutes then it clicks and u can open the door again
Mine to stop it walking, I had to tilt it backwards.
Rex-Electrolux-Zanussi Jetsy or Hotpoint Aqualtis. 😁
lg 17kg washer but smaller and whirlpool 🤣
@@WashingChannel2008 done a top load washer like frigidaire tub agitating 🤣
Thats amazing!!!😍😍😍
I got the vid while washing in lg
the wash style looks a beko
Next experiment wood wash
this but the washer is laying on its back so it becomes a top loader
I will do that when I do open door washes, nice video btw
Nobody cares about that?
@@nrckkus Don't be rude to him!
....
@@nrckkus yeah!
@@nrckkusyeah
My washing machine Aeg is power
Pls do Roblox☕️
He’s a grown man, he probably doesn’t play it
Goofy ahh request😂
Satisfying😍
❤️❤️❤️❤️👍👍👍👍👏👏👏👏💪💪💪💪☺️☺️☺️☺️😉😉😉😉😎😎😎😎🧒🧒🧒🧒🐈🐈🐈🐈👟👟👟👟🎮🎮🎮🎮🏁🏁🏁🏁⚽⚽⚽⚽
Cool
i hear a bird in video. Name of bird?
Wow🎉
No