Mam in that data frame structure have 3 ACK bits but I understand only two ACK *One is address of device send to the master *Another send the data recived information *What about last one mam
Acknowledgement gets transmitted for every data byte. In this case data has two bytes. So, two acknowledgments for each byte. And one acknowledgement is for address as you mentioned. Total 3 bytes. Hope your doubt is cleared.
![[Live สด] การออกรางวัลสลากกินแบ่งรัฐบาล งวดวันที่ 16 พฤศจิกายน 2567](http://i.ytimg.com/vi/wPd7VFfWHIA/mqdefault.jpg)
Chaala baaga explain chesaaru.
Master and 3 slaves connections lo arrows konchem tappu ga vunnaay.
But good work madam.
Thank you
Yeah, it's a overlook. Thanks for bringing it to our notice. We will rectify it.
It was a clear and simplified explanation. All the best for your next videos.
Thank you... Please keep watching...
It's an start up boost, that who are ready to go for embedded. Do more n more contents on it.
Thank you
Sure, thanks for your feedback.
Hello, i really love the way you explain. Can you please make a video explaining rtos and free rtos....please
Madam new videos cheyyandi meeku 1 lakh sure ga vastaru viewers
చాలా బాగా అర్థమయ్యేలా చెప్పారు మేడం.
Thank you.Keep Watching....
The video is so helpful, thank you. And your voice is so nice 👏😊🎉
simply superb your explanation.., but after complete your explanation better to explain with small code and examples., it is more understand to us
Sure, thanks for your feedback. Please keep watching. Please subscribe if not subscribed.
I am a new subscriber your explanation is amazing madam
Very good explanation. rtos gurinchi emaina knowledge share chestara.SPI,I2C and UART superb.
Sure. Will do videos on RTOS also. Thanks for watching.
Thank you, explained very well. Wish you all the best,keep post on more content on embedded domain.
Sure, thank you. Please keep watching...
Except low voice everything teaching was good , loud up voice mam.
Thank you. It is rectified in later videos.
YOUR EXPLANATION IS VERY NICE SIS
thanks alot mam u have explained very well please post few more in this domain😊
Sure. Thanks for watching.
ur welcome mam
Good Explanation 👍
Can we coonect same two masters for a slave?
Thanks madam excellent teaching mam please explain in automotive lo CAPL scripts madam
Sure
Tanks madam it's very helpful....
Thank you... Please keep watching...
Thanku so much mam
Keep posting will support definitely
Thank you so much. Please share to those who may need it.
Very good explanation.
Thanking you.
Thank you for your feedback. Please go through remaining videos and share to your friends.
Good Explanation ✨
Nice explanation, but voice is very low. Need to rise the voice in confident way.
Problem with mic in earlier videos. It is rectified in later videos.
Pls explaine tcp/ip and CAN protocol also......
Sure
In i2c 3 ACK bits there and 2 8 bits data what about last ack and last one data bit
1 ACK bit is the response of the slave for the address received.
PLEASE YOU CAN EXPLAIN ADC AND ADC TYPES
Sure. Will explain in my future videos.
Can you explain bit banking,in i2c different terminology is there can you explain
Bit banging is nothing but achieving a protocol by manipulating the existing GPIO pins. Will post a video on that.
Super explanation madam
Thank you.. please keep watching and share with your friends...
Mi voice super....
liked and subscribed. supreb. Please be keep on move another topics. PWM, ADC,DAC,INTERRUPTS. if possible. RTOS, CAN.
Sure, videos on CAN are already posted and in progress. Please checkout.
Good explanation 🙏
Thank you. Please keep watching and share with your friends.
can u explain the timers pls
Sure
Please what is bus arbitation
🙌 🎉 great content
Thank you...
mam can u explain trace32 ,jira and jtag tools
Sure
Hello mam explain the code also please.......
Good explained👍 , Thank you
Thank you... Please keep watching...
Super explained
Superb mam ...
Thank you... keep watching...
Good explanation
Good explanation 👌👌👌👌
Hi mam ...is this regarding automotive domain
No. Embedded Systems.
What is the difference between gpio pins and i2c pins ?
Will try to explain in coming videos. Thanks for watching...
Or any ADC??
Mam in that data frame structure have 3 ACK bits but I understand only two ACK
*One is address of device send to the master
*Another send the data recived information
*What about last one mam
Acknowledgement gets transmitted for every data byte. In this case data has two bytes. So, two acknowledgments for each byte. And one acknowledgement is for address as you mentioned. Total 3 bytes. Hope your doubt is cleared.
@@EmbeddedGuideTelugu my doubt cleared thanks you 😊
WHICH BIT IS TRANSFERRED FIRST?
IS IT LSB OR MSB?
PLEASE SPECIFY!!!
MSB to LSB Transferring
Good explanation...
Thank you... please keep watching...
Nice explanation madam
Thank you...Keep Watching...
UDS topic videos upload madam
Please expand UDS. I am unable to get it.
Thanks madam
Thanks for watching. Please keep watching and share with your friends.
Madam
We are teaching Embedded C course.
I am joining . How to communicate to you .
You can communicate through my email - embeddedguide2020@gmail.com
mam can u plz share the i2c spec sheet?
Please go through below link:
www.i2c-bus.org/specification/
Very interesting
Thank you...Keep Watching...
Super chala baga ardamayyindi. Mam
Thank you... Please keep watching...
Thanks
Thanks for watching... Stay tuned and share with your friends...
can we use this i2c in 8051 (AT89S52) controller? by using port pins as sda and scl ?
You can use a concept called bit banging. Search for bit banging concept and sample codes for bit banging.
@@EmbeddedGuideTelugu thank you
Superb.. Mmmm
Thank you...
Wt is arbitration..???
We will cover it in our coming videos.
Ok tq
👌
Thank You...
Hlo ..mam
Nice explanation...
Thanks for watching...
Tq madam
Thanks for watching
👌