0:17 is a terrific way to lose a chunk of finger. Do NOT use a power tool for attaching a sharp blade to a small piece of wood, especially with your finger right next to the blade. Pre-drill a hole with the blade somewhere far far away, then gently, firmly, and CAREFULLY attach the screw with a full length screwdriver, preferably using a vice or clamp so your hands are never near any drill bits or blades. YOU NEVER KNOW when the blade will start spinning with the power tool and screw instead of staying still against the wood.
Extend the ends of the aluminum angle stock passed the edge of the cardboard and clamp them down, then you wont have any slips. 2 pack of Dewalt's small trigger clamps is like $7
Our company is selling vibration cutting machine. Our cutting machines are efficient，cost performance, economical and practical, which is suitable for cloth,shoes,carbon fiber, leather, PVC, glass fiber, fiber, aromatic fiber, ceramic fiber, XPE materials, silk ring, silicone, rubber, acrylic, kt plate. Our vibrate cutting machine also can save time and manpower. If you are interested in our products, I can introduce our vibration cutting machine to you.
0:17 is a terrific way to lose a chunk of finger. Do NOT use a power tool for attaching a sharp blade to a small piece of wood, especially with your finger right next to the blade. Pre-drill a hole with the blade somewhere far far away, then gently, firmly, and CAREFULLY attach the screw with a full length screwdriver, preferably using a vice or clamp so your hands are never near any drill bits or blades. YOU NEVER KNOW when the blade will start spinning with the power tool and screw instead of staying still against the wood.
Thank you so much! I'd like to do more with carboard but have such a hard time cutting it straight and cleanly - these techniques will really help!
Very simple tricks but that can make a world of difference! Thanks for sharing!!
This is the fundamental area I need to master.
I have so many ideas like you
you spreads almost whats in my mind
you are gorgeous 👍👍👍
Thank you very much for your idea because it was enough to think about it ... Really useful for me ...
Good you're soon going to reach 100k subscribers
Nice video, so informative and useful, subscribed!
Gracias por el video. Muy bueno 😅😅
Thank you for sharing these techniques - very helpful!!
genial! gracias!🙌👏👏👏👏
This is VERY helpful, thank you.
Hi what is that ruler called that has like two metal pieces? You see it in the video at: 1:42 time frame.
I wonder why all van/camper builders dont use cardboard and fabric for building furniture. It is so much lighter then wood.
Yes but it's also not waterproof unless you spend money waterproofing it. Then it's not really worth all the money spent.
@@poo2choo if you have incar/indoor shower you should use the curtain,
of course you will not make the kitchen countertop of it
@@-COBRA I think you could and cover it with a thin coat of resin.
or corrigated core plastic sheets
@@poo2choo use Titebond III wood glue that is waterproof. We use it in paper mache mask making.
You should put a link to where you can get some of these supplies. Maybe an amazon link.
Yes! This would totally help a lot
Agree
Candace Corey 0:06 “boxcutter”
0:18 “electric screw driver”
1:41 “metal outside corner”
1:51 “boxcutter”
2:16 “metal outside corner”
hope this helps :)
Extend the ends of the aluminum angle stock passed the edge of the cardboard and clamp them down, then you wont have any slips. 2 pack of Dewalt's small trigger clamps is like $7
May GOD bless you 💪🙏👍❤️❤️❤️❤️❤️
what is the thickness of cardboard you used?
Where can I purchase that 90° tool you use?
It's just aluminum angle stock. You can get them in various lengths at home depot, lowes, menards, etc.
@@MRGULIC thanks 🙂
It is so simple, but pure genius. Thank you for sharing.
For a second, I thought you were going to attach the circle cutter to the drill!
*THANKS SO MUCH FOR SHARING GOD BLESS*
We need to change nail for every different radius😭😭
😍👌👏👏
👍🏆
Showing this on TH-cam should make the technique safer, you can get seriously hurt!
Our company is selling vibration cutting machine. Our cutting machines are efficient，cost performance, economical and practical, which is suitable for cloth,shoes,carbon fiber, leather, PVC, glass fiber, fiber, aromatic fiber, ceramic fiber, XPE materials, silk ring, silicone, rubber, acrylic, kt plate. Our vibrate cutting machine also can save time and manpower. If you are interested in our products, I can introduce our vibration cutting machine to you.