Ron thank you for sharing the information with us. Harbor Freight sales black & white power paint, I use it for spinner and buzz blades before I paint them.
Great video, plan on building some similar. Just wondering if it’s necessary to use the bottom 3” coupler? Seems like you could just use a piece of 2” pipe on the bottom cut to your desired length with a test cap on the bottom. Only benefit to the 3” coupler I can see is a little more stable base.
It creates an air chamber so you get a more even flow of air coming up through the paper filter. Also allows you to control the air pressure with the air valve.
@@CrustyCranks I get that but I believe you can eliminate the most expensive piece, the 3” long coupler, and still get the same results. I can see the double wall may help to secure the regulator valve but if not that could just be a straight piece of 2” with a test cap on the bottom and paper filter on top, then short coupler with another piece of 2” on top for the medium basin.
Enjoyed the video! Thanks for showing how you made your fluid bed. Explain everything well! Thanks for sharing!
You are so welcome! Thanks Bryan
Best video on this project I have seen yet, thanks
Glad you liked it! Thanks Rob
Ron thank you for sharing the information with us. Harbor Freight sales black & white power paint, I use it for spinner and buzz blades before I paint them.
Good Info Charley I did not know that. Thanks for sharing
I enjoy watch your video😊
Thank you 🤗
Great video, plan on building some similar. Just wondering if it’s necessary to use the bottom 3” coupler? Seems like you could just use a piece of 2” pipe on the bottom cut to your desired length with a test cap on the bottom. Only benefit to the 3” coupler I can see is a little more stable base.
It creates an air chamber so you get a more even flow of air coming up through the paper filter. Also allows you to control the air pressure with the air valve.
@@CrustyCranks I get that but I believe you can eliminate the most expensive piece, the 3” long coupler, and still get the same results. I can see the double wall may help to secure the regulator valve but if not that could just be a straight piece of 2” with a test cap on the bottom and paper filter on top, then short coupler with another piece of 2” on top for the medium basin.
Another good video..great idea ,
Glad you enjoyed it
Another great video brother!
Thanks again!
Looks kinda like mine excellent video. I SENT THAT INFORMATION YOU WANTED. HOPE YOUR YOU GOT IT
Yes I did. Thanks Morgan!
Great video
Glad you enjoyed it Thanks for Watching!
👍👍👍👍👍
Thanks for Watching!
Hello everything is fine? What type of coating do you use to paint?
I use the Pro-Tec Brand of Powder coating. I also like airbrush them to. Thanks for Watching!
How air goes in paper? 🤔
The paper acts as a filter it allows air to flow thru at a controlled rate.
@@CrustyCranks it's just a standart paper for printer?
@@13cranium Yes just a regular 20lb Bond printer paper works for me
Link for aquarium pump not working.
Looks like that one is no longer available, here's a similar one amzn.to/3LBDr3d
@@CrustyCranks You mention your drill is 13/16 a couple times. I doubt it is that. Is it a 3/16 drill?
@@NP-ql4qo I apologize for that I stand corrected. I updated the description Thanks for bringing that to my attention,
@@NP-ql4qo Yes 3/16th