I just replaced the trigger on mine with a Freedom Smith trigger. I did it myself and wow what a difference. My son said it makes the old trigger feel like a toy.
Btw guys, I also tried a 13lbs Glock recoil spring and guide rod with a Glock gen 4 adaptor. I ran hand loads from well below recommended powder charge to well above and didn’t notice any reduction in muzzle flip over the factory recoil spring so I went back to the factory setup. Just thought I would share that in case you were considering trying that.
Would love to see you guys or anyone stipple the Canik TP9 Elite Combat pistol. You guys killed this one here. Love Canik pistols hope to see more work on more of them
I’ve seen many videos of this pistol because I was thinking about purchasing one. I love your mods I can see definite improvements when you were firing down range and I’d love for you to tweak mine after I purchase one please! Awesome vid
Averi Morrow - Unfortunately we are not about to work on customer firearms right now. Planning and zoning denied our approval to open a business at our current location. We are looking for a shop now but it may not open for business for another year. Contact me through our website and I can help you find a shop that can do the same work we did.
Just a suggestion but when you gauge your trigger weight try to immobilize the gun to reduce or eliminate and human error. You may find that the trigger is lighter than you think because you are over pulling it while trying to hold it static in the air.
Nice video and links. I did the plunger spring and it's definitely lighter. Waiting til I sight the Vortex Venom in to decide on the Striker spring. Thanks
Ed Hlavaty - thanks Ed, I’m glad it worked out for you and thanks for watching. As far as the striker spring I wouldn’t worry about it unless you having issues with light strikes. Polish your plunger and trigger bar and you should be good to go! Thanks again Bud!
TacticalTuner I will. It shipped today. I sighted the Vortex in and was shooting 1/2" groups easily at 15 yards. Polished the parts as well. Gun is more capable than the shooter. Lol
TacticalTuner I just got my Wolffe striker spring and changed it. The plunger spring and the polishing helped but the Striker spring made the noticeable difference. I didn't scale it but you notice the difference. Maybe 1/4-1/3 less pressure needed in the reset
David Niquette - unfortunately I have Spence sold the pistol. All you need to do is take a small file and file down the edge the trigger safely right were it contacts the frame. Don’t take to much off or the safety will not work. Take just enough off to stop it from hanging up. Hope this helps.
if you got a 1 LB reduction on the trigger after cleaning and replacing the firing pin plunger block spring, why did you also replace the Firing pin spring. What did that change do for it? Thank You great video.
ostbob - I just wanted to see what effect a light firing pin spring would have on it. I had heard that people were getting some light primer strikes. However I never had an issue with the factory firing pin spring.
If i was gonna stipple my Canick myself how would i do it with the blackstrap still on the gun? How did y’all do it? Just leave it on and just blend it in with stippling? Thanks in advanced.
Ya the striker spring replacement really didn’t do anything. On Glocks it can help lighten the trigger but didn’t in the Canik. The lightened plunger did drop the trigger weight thought.
The threaded barrel is now at $185.00 and has been out of stock for a very long time. Im looking for a compisater for this gun if anyone has a lock on where to get one please let me know.
He said it was a lightened Glock plunger spring . . . Hold on . . . I'll get a link. This will work and you can buy a packet of these for very short money. ghostinc.com/reduced-power-firing-pin-safety-plunger-spring-for-glocks-gen-1-5-and-42-43/
How did you remove the material of the frame so it fits your hand better. I just got mine and with the small backtrap it just does not fit my hand well😢😢 . With the correct alignment of grabbing pistol so it runs parallel to my arm my trigger finger rubs on the lower patr of trigger guard. I need to lengthen my trigger finger. LOL... Good job yours looks great.
Richardd Harper - really you have to be willing to stipple your grip. You start by using a Dremel tool to shape the grip to fit your hand better. Then you cover the dremeled area by stippling over it. I learned how to broader stipple and a grip just by watching your tube video of people showing how to do it. Then started practicing on some plastic spoons. It is nerve racking but easier than you would think.
@@tacticaltuner4217 When doing the stippling how did you blend the gap between the frame and removable backstrap? I don't really see any discernable gap on the finished product.
@@paWOLFck Just stipple right over the gap. the iron will melt the sides together and the gap will disappear, you will not be able to change the back strap after that though.
I changed the recoil to the Yellow sprinco, 29 lb Newton striker spring and the cajun reduced power safety plunger spring and the slide won't stay back after the last round is fired. It will stay back on an empty magazine. I changed it back to the OEM recoil and it does the same thing. Do you know if the striker firing pin spring would have anything to do with the slide not cycling back far enough to catch the slide stop? Shooting 115 grain. Does it with all my mags. Does the striker pin spring have anything to do with it, I still have the 29 newton on it. Great video and great work on your gun
Sorry bud just seen your note, try switching back to the original striker spring and see if it continues. I wouldn’t think that would cause the issue but worth being sure. Sounds more like a slide release issue. Is it possibly you hand is riding in the slide release on your last round?
@@tacticaltuner4217 I apologize and I would have bet my life it wasn't me riding the slide release after shooting it for over a year without any problems, but it was. Thanks for your help
Slide off push gently up on slide stop to de-arch the spring some; it will stop the slide then; if you go to far you will have to disassemble and pull the spring to re-arch so be careful...
Tou Chang - that didn’t improve the trigger weight it just help with the trigger/safety timing. After the trigger job was done the trigger safety would hang up so I put just a Bit of an angle on the safety so that the safety would disengage a second sooner.
There a number of aftermarket Glock spring in various weights. Be careful about using a weight that is too low. You will experience reset problems, and those may not appear in dry firing.
Just curious. But isn't the trigger for the SFX about 3.5lbs out of the box? You said the plunger spring dropped your pull weight a pound. Not criticizing honestly curious about it because I'm considering doing a similar modification to mine.
Jonathan Gutierrez - they advertise 3.5-4 lbs however when I got mine it was 4.5 - 4.75. From what I have seen most people are getting them between 4 & 4.5. There may be some that come at 3.5 but I wasn’t that lucky. Good question though bud thanks!
I really appreciate the feedback! So I went ahead with the swap in the spring and wow it made a difference!! But one more question if you don't mind. I noticed the glock spring I replaced it with was about half the size length wise and also seemed thinner. Is that what I should've expected? Just making sure I ordered the correct spring lol
avigares - the advertised pull weight is 3.5 - 4 lbs. mine was 4 lbs when I got it. Most competition guns will have 2-3 lbs triggers like the CZ Checkmate. For 5 bucks I changed one spring and went from a 4lbs to 3 lbs tigger. I did it to make a more effective competition gun. I think a one lbs drop worth $5 bucks. Thanks man!
Thanks you. I recently purchased a Canik SFX and I have to say its the best sub $500 gun I've seen. I love it and think it is worthy of a few upgrades. I saw a plunger spring on another site then I saw this video and I always try to go with something I can see guys are actually using so I know they work and not causing failures. I really like your Canik. Thanks for sharing. I think Im becoming a Canik Fanatic:-)
Bonnie Dingman - I can not do the work until I am licensed to do to ITAR regulation however if you would like, contact me through our website and I my be a able to help you find a shop that can do the same work.
Yusuf ÇETİN - I agree steel CZ style guns are great, I also own a CZ TSO and CZ Shadow 2...great guns however polymer guns are very proven guns much like the Glocks and HKs. More polymer guns are striker fire which I find are easier to modify, improve customize over the all steel pistols.
Tou Chang - You would want to look for a local gun store or gunsmith the does cerakote and have them cerakote the lower in Tungsten. Usually cost $50 to $100. Hope this helps.
I just replaced the trigger on mine with a Freedom Smith trigger. I did it myself and wow what a difference. My son said it makes the old trigger feel like a toy.
Btw guys, I also tried a 13lbs Glock recoil spring and guide rod with a Glock gen 4 adaptor. I ran hand loads from well below recommended powder charge to well above and didn’t notice any reduction in muzzle flip over the factory recoil spring so I went back to the factory setup. Just thought I would share that in case you were considering trying that.
That is one hell of a stippling job. Very nice!!!
You're the first person I've seen to really do any work to one of these. Good to see since I got one too.
Just letting you know this Canik is for sale if your interested. www.gunbroker.com/item/773593102
Great stippling job! It looks beautiful.
Do you still offer the stippling services?
Nicely done
Would love to see you guys or anyone stipple the Canik TP9 Elite Combat pistol. You guys killed this one here. Love Canik pistols hope to see more work on more of them
My SFx needs this so bad!
love the matching lower.
Just letting you know this Canik is for sale if your interested. www.gunbroker.com/item/773593102
Loved the color you gave it.
Just letting you know this Canik is for sale if your interested. www.gunbroker.com/item/773593102
That is a beautiful stippling job. Great video. I love my Canik pistols.
Just letting you know this Canik is for sale if your interested. www.gunbroker.com/item/773593102
I’ve seen many videos of this pistol because I was thinking about purchasing one. I love your mods I can see definite improvements when you were firing down range and I’d love for you to tweak mine after I purchase one please! Awesome vid
Averi Morrow - Unfortunately we are not about to work on customer firearms right now. Planning and zoning denied our approval to open a business at our current location. We are looking for a shop now but it may not open for business for another year. Contact me through our website and I can help you find a shop that can do the same work we did.
Just letting you know this Canik is for sale if your interested. www.gunbroker.com/item/773593102
@@tacticaltuner4217 Please build and sell another one and let me know
Gun looks great. Thank you for the video!!!
Just a suggestion but when you gauge your trigger weight try to immobilize the gun to reduce or eliminate and human error. You may find that the trigger is lighter than you think because you are over pulling it while trying to hold it static in the air.
Nice Job, Thanks for the tips !!!
Hey thanks for the information that was really kind to explain your process. Guess I need some plastic spoons..lol
Thanks friend
Get in touch when you’re ready to open your shop.
Joseph Perry - will do bud, hoping Fall 2019.
threaded barrel info please. Make model place to buy it?
Nice video and links. I did the plunger spring and it's definitely lighter. Waiting til I sight the Vortex Venom in to decide on the Striker spring. Thanks
Ed Hlavaty - thanks Ed, I’m glad it worked out for you and thanks for watching. As far as the striker spring I wouldn’t worry about it unless you having issues with light strikes. Polish your plunger and trigger bar and you should be good to go! Thanks again Bud!
TacticalTuner I have a Wolff 6 lb. Spring coming for $6-$7 most I'll have to do is swap it back. Thank you
Ed Hlavaty - let me know how well the Wolf spring does. I may have to try that..
TacticalTuner I will. It shipped today. I sighted the Vortex in and was shooting 1/2" groups easily at 15 yards. Polished the parts as well. Gun is more capable than the shooter. Lol
TacticalTuner I just got my Wolffe striker spring and changed it. The plunger spring and the polishing helped but the Striker spring made the noticeable difference. I didn't scale it but you notice the difference. Maybe 1/4-1/3 less pressure needed in the reset
Can you explain more in detail that trigger mod' angle for rapid fire? I couldnt see..
Can you get up close shot of what you did to the trigger safety at about 4:35 mark.
David Niquette - unfortunately I have Spence sold the pistol. All you need to do is take a small file and file down the edge the trigger safely right were it contacts the frame. Don’t take to much off or the safety will not work. Take just enough off to stop it from hanging up. Hope this helps.
if you got a 1 LB reduction on the trigger after cleaning and replacing the firing pin plunger block spring, why did you also replace the Firing pin spring. What did that change do for it?
Thank You great video.
ostbob - I just wanted to see what effect a light firing pin spring would have on it. I had heard that people were getting some light primer strikes. However I never had an issue with the factory firing pin spring.
If i was gonna stipple my Canick myself how would i do it with the blackstrap still on the gun? How did y’all do it? Just leave it on and just blend it in with stippling? Thanks in advanced.
Couples Humor contact me through our website and I will get I touch with you.
TacticalTuner sent you a msg through your website. Thank you.
When you install your Burris fastfire 3 on your Canik tp9sfx did you use the little locking nuts on the screws
I used locktite on the screws
What plunger spring did you use?
Why change the firing spring?
Ya the striker spring replacement really didn’t do anything. On Glocks it can help lighten the trigger but didn’t in the Canik. The lightened plunger did drop the trigger weight thought.
The threaded barrel is now at $185.00 and has been out of stock for a very long time. Im looking for a compisater for this gun if anyone has a lock on where to get one please let me know.
45 Blast compensator .
Where ca i get the threaded barrel for the tp9sfx
I got mine at preppergunshop
Do.you off this service to the public?
Not yet, we are waiting on our FFL to come in.
What glock threaded barrel did you buy?
its not, its a Canik barrel.
Can you post a link to the plunger spring? Maybe a video about hpw to swap it out? Thanks!
Yes, I would like to see th is too!
He said it was a lightened Glock plunger spring . . . Hold on . . . I'll get a link. This will work and you can buy a packet of these for very short money. ghostinc.com/reduced-power-firing-pin-safety-plunger-spring-for-glocks-gen-1-5-and-42-43/
@@paulklenk9605 jesus, $38 to ship a $3 spring to me in Canada...
Anybody want to buy a 3 pack and send me one and be a pal??? Lol
How did you remove the material of the frame so it fits your hand better. I just got mine and with the small backtrap it just does not fit my hand well😢😢 . With the correct alignment of grabbing pistol so it runs parallel to my arm my trigger finger rubs on the lower patr of trigger guard. I need to lengthen my trigger finger. LOL... Good job yours looks great.
Richardd Harper - really you have to be willing to stipple your grip. You start by using a Dremel tool to shape the grip to fit your hand better. Then you cover the dremeled area by stippling over it. I learned how to broader stipple and a grip just by watching your tube video of people showing how to do it. Then started practicing on some plastic spoons. It is nerve racking but easier than you would think.
Just letting you know this Canik is for sale if your interested. www.gunbroker.com/item/773593102
@@tacticaltuner4217 When doing the stippling how did you blend the gap between the frame and removable backstrap? I don't really see any discernable gap on the finished product.
@@paWOLFck Just stipple right over the gap. the iron will melt the sides together and the gap will disappear, you will not be able to change the back strap after that though.
I changed the recoil to the Yellow sprinco, 29 lb Newton striker spring and the cajun reduced power safety plunger spring and the slide won't stay back after the last round is fired. It will stay back on an empty magazine. I changed it back to the OEM recoil and it does the same thing. Do you know if the striker firing pin spring would have anything to do with the slide not cycling back far enough to catch the slide stop? Shooting 115 grain. Does it with all my mags.
Does the striker pin spring have anything to do with it, I still have the 29 newton on it.
Great video and great work on your gun
Sorry bud just seen your note, try switching back to the original striker spring and see if it continues. I wouldn’t think that would cause the issue but worth being sure. Sounds more like a slide release issue. Is it possibly you hand is riding in the slide release on your last round?
@@tacticaltuner4217 I apologize and I would have bet my life it wasn't me riding the slide release after shooting it for over a year without any problems, but it was. Thanks for your help
ostbob - I would try going back to the original striker spring, if that doesn’t fix it call Canik and see what they say.
Slide off push gently up on slide stop to de-arch the spring some; it will stop the slide then; if you go to far you will have to disassemble and pull the spring to re-arch so be careful...
How’d you put your safety at an angle to lighten it more .
Tou Chang - that didn’t improve the trigger weight it just help with the trigger/safety timing. After the trigger job was done the trigger safety would hang up so I put just a Bit of an angle on the safety so that the safety would disengage a second sooner.
I have one. I'm interested in getting a fifferent color to mind...
The Recruit 1 - check out the video we just posted about Home Cerakote setup.
TacticalTuner the frame of the canik is a poly/plastic, right? How do you cerakote that? Or are you using a different frame?
Sorry, you said you used a Glock Light Plunger spring. Is there only one or do I need to know what model Glock it's used on?
ostbob - it my have been for a g17 but I think they are all the same. Should be a link below. Hope this helps.
There a number of aftermarket Glock spring in various weights. Be careful about using a weight that is too low. You will experience reset problems, and those may not appear in dry firing.
Which glock barrel did you use
it is a Canik Barrel From Preppers gun shop.
They are out of stock on their site. Would you have an extra you could part with.
what spring did you buy that made the trigger lighter? link?
Nathan Webb - lighted safety plunger spring- www.glockstore.com/Custom-Firing-Pin-Safety-Plunger-Spring
Just curious. But isn't the trigger for the SFX about 3.5lbs out of the box? You said the plunger spring dropped your pull weight a pound. Not criticizing honestly curious about it because I'm considering doing a similar modification to mine.
Jonathan Gutierrez - they advertise 3.5-4 lbs however when I got mine it was 4.5 - 4.75. From what I have seen most people are getting them between 4 & 4.5. There may be some that come at 3.5 but I wasn’t that lucky. Good question though bud thanks!
I really appreciate the feedback! So I went ahead with the swap in the spring and wow it made a difference!! But one more question if you don't mind. I noticed the glock spring I replaced it with was about half the size length wise and also seemed thinner. Is that what I should've expected? Just making sure I ordered the correct spring lol
Jonathan Gutierrez Read my posts I just did my trigger.
Jonathan Gutierrez -yep that’s is the way mine was to. You should be good to go. Glad to hear it worked out for ya.
Jonathan Gutierrez Yes. Mine was too.
this gun has already 3.14-3.50 lbs trigger why did u change? i dont get the point.
avigares - the advertised pull weight is 3.5 - 4 lbs. mine was 4 lbs when I got it. Most competition guns will have 2-3 lbs triggers like the CZ Checkmate. For 5 bucks I changed one spring and went from a 4lbs to 3 lbs tigger. I did it to make a more effective competition gun. I think a one lbs drop worth $5 bucks. Thanks man!
where did you get the plunger spring?
Warren Stephens - got it from the Glock store. Your looking for the Glock lightened plunger spring.
Thanks you.
I recently purchased a Canik SFX and I have to say its the best sub $500 gun I've seen. I love it and think it is worthy of a few upgrades.
I saw a plunger spring on another site then I saw this video and I always try to go with something I can see guys are actually using so I know they work and not causing failures.
I really like your Canik. Thanks for sharing. I think Im becoming a Canik Fanatic:-)
Have you run this gun suppressed yet?
Shaldon Parker - no sure didn’t. We sold it before we got to try that.
Dang ok
Where can i get that barrel?
www.preppergunshop.com/rcm-canik-threaded-barrels-canik-tp9sfx-threaded-barrel-1-2x28-thread-made-by-rcm-only-fits-tp9sfx/
Will this parts work on the sf model ?
José Rodríguez - yes the parts I used in my SFX should work just find in a sf. It’s Basically the same gun.
Just letting you know this Canik is for sale if your interested. www.gunbroker.com/item/773593102
I would like to have this work done on mine you should go into business.
Bonnie Dingman - Thanks Bonnie! we tried to but had a planning and zone issue. I am going to try open a custom shop up in the next year or two.
please let me know I would love to have these mods done on my sfx
Bonnie Dingman - I can not do the work until I am licensed to do to ITAR regulation however if you would like, contact me through our website and I my be a able to help you find a shop that can do the same work.
Just letting you know this Canik is for sale if your interested. www.gunbroker.com/item/773593102
@tacticalTuner Ever get that custom shop up and running?
How much did it cost to customize?
Yainier Perez - The Barrel was $150, optics was $175. The cerakote and stippling I did myself. Cost about $500 in equipment to start cerakoting.
Just letting you know this Canik is for sale if your interested. www.gunbroker.com/item/773593102
I wonder that why the american people chose canik tp (polimer) series? Why don't they chose a full steel model like canik s120, p120 or p100?
Yusuf ÇETİN - I agree steel CZ style guns are great, I also own a CZ TSO and CZ Shadow 2...great guns however polymer guns are very proven guns much like the Glocks and HKs. More polymer guns are striker fire which I find are easier to modify, improve customize over the all steel pistols.
Thank you @@tacticaltuner4217
then inners were copyed from the ppq
Kenik değil o silahın adı Canik niye anlamıyonuz
Efe İssi - sorry bud, I only speak and read English.
Where would I go to get the tungsten on the lower part of the pistol ?
Tou Chang - You would want to look for a local gun store or gunsmith the does cerakote and have them cerakote the lower in Tungsten. Usually cost $50 to $100. Hope this helps.
TacticalTuner okay thank you I will definitely go get a quote from one of my local shops thank you !
Just got a quote for 100$ for a cerakote finish on the polymer I’m going to do an exact of yours .
Tou Chang - that’s great, ya two tone is usually a little more.
Just letting you know this Canik is for sale if your interested. www.gunbroker.com/item/773593102
Bruh... You have got to stop biting you fingernails.
LOL...arint that the truth
your trigger job looks bad