I've also tried Renolink 1.87 with a Laguna II and a Clio II with chinese Keys and worked perfectly. I bought Renolink from EU, but the chinese version also works.
If I don't have any cards for the car at all and I get used 3 button cards and new transponders, can I just add them to the car? The only original thing I still have for the car is a transponder, but it is not recognized by the car, so I can neither open nor close it and I cannot turn on the ignition. If I find the cards again, I can turn on the ignition, but there are other transponders in it and I would now get 2 cards with the same buttons from a used car and swap the transponders in the cards and then teach them, I have to do each one Press card on Validate or only when I have put all the cards in one after the other?
Hi. Do you have any information where can I download working software Renolink 1.87 or the newer 1.99 ? I purchased a Renolink adapter ( colour is red ) from AliExpress but the software program can't find the adapter/dongle. The seller does not respond. So i would appreciate if you could help me. Thank you. Peter
@@dul-boy I've been away for almost a month and I have over a hundred messages. I answer as quickly as I can, but I don't sleep in front of the PC. every email I receive from you has a requirement and it takes my time, that's why it takes so long to reply to the email.
how did you get a connection to the probe? I get rid of the red x but then I get this message Character spacing is invalid and cannot be removed. I just want to read the pin of the cards and then establish the connection for learning and programming and then after that has happened successfully cut the connection.
@@YOYODiagnostic Driver's door is open. Light, ventilation, radio, etc. are switched off. But Renolink always says: Padding is invalid and cannot be removed. Lg. Kalle
@@kaller.9440 I posted my email address everywhere. Next time please search don't be lazy. yoyo.pc86@gmail.com. If I give you time, you can also look at the address for at least 1 minute.
Very good instructions for Laguna. Trying to add a key for Dacia Duster following your procedure, but keep getting an the following error once i pressed Start Learning . 7F8022 Conditions not set or sequence error. I'm using a Chinese clone of Renolink:( Any ideas please? Thanks.
Muchas gracias por tutorial, no se nada de inglés, y con tu ayuda he configurado mis 4 tarjetas. Gracias.
You are welcome. 👍
Nice job. Thanks.
👍
I've also tried Renolink 1.87 with a Laguna II and a Clio II with chinese Keys and worked perfectly. I bought Renolink from EU, but the chinese version also works.
Hi.
At this point they have the offer for the original product which costs a little more than the Clone. You can find it on www.renolink-europe.com
Is the card blank or which card can I program?
Is the card blank or which card can I program?
@@kadermin7532
Hello.
yes in this case i programmed a card bought from ebay.
@@YOYODiagnostic u know that website is fake right?
Is the card blank or which card can I program?
Press Validate after each card?
Hola, sabes si se puede a Renault laguna 2 fase 2 tarjeta 3 botones inteligente
I have an ELM 327 interface (firmware version 1.4).
Anyone know whether it will work with the RenoLink software ?
If I don't have any cards for the car at all and I get used 3 button cards and new transponders, can I just add them to the car?
The only original thing I still have for the car is a transponder, but it is not recognized by the car, so I can neither open nor close it and I cannot turn on the ignition.
If I find the cards again, I can turn on the ignition, but there are other transponders in it and I would now get 2 cards with the same buttons from a used car and swap the transponders in the cards and then teach them, I have to do each one Press card on Validate or only when I have put all the cards in one after the other?
Thanks
👍
windows XP ???
Hi. Do you have any information where can I download working software Renolink 1.87 or the newer 1.99 ? I purchased a Renolink adapter ( colour is red ) from AliExpress but the software program can't find the adapter/dongle. The seller does not respond. So i would appreciate if you could help me. Thank you. Peter
Hello,
unfortunately I don't distribute software, that's not the purpose of this channel.
I use Original from Gabi Gafu, please contact him.
Hey! Nice video! Can I make a keycard if I lost all the cards? Or I need one which would start the car?
Hi. You don't need a key to be able to make a new one .
hello....it is possible to program a 2 button card instead of the original with 3 buttons (lock + auto in the middle)...thanx ....
Hello, Yes it is
Hi there
Can I program three keys at ones?
Hello, yes you can.
I programmed 3 new cards bought on Ebay because the car no longer had any keys.
Hello my brother. My brother can help me. I want the patch panel Clio 4 model 2017
Thank you very much. Can I get a car file for Laguna 2 phase
Wich Files?
Please sir I have Laguna 2 2007
Can you help me program it.
I don't have the software
Hello,
unfortunately I can't help you!
How can i help you if you don't have what you need for the repair?
When I try to key programing,i finsh read pin and connect,but on start learning i get-7f3b22 Conditions not set or sequence error...Any help,thanks...
Hello.
take a picture and send by email
@@YOYODiagnostic I send mail,but i dont get answer...
@@dul-boy I've been away for almost a month and I have over a hundred messages. I answer as quickly as I can, but I don't sleep in front of the PC. every email I receive from you has a requirement and it takes my time, that's why it takes so long to reply to the email.
how did you get a connection to the probe?
I get rid of the red x but then I get this message Character spacing is invalid and cannot be removed.
I just want to read the pin of the cards and then establish the connection for learning and programming and then after that has happened successfully cut the connection.
Hello,
do exactly as I did in the video. i think i have two , watch carefully and remember to keep the driver's door open while doing this.
@@YOYODiagnostic
Driver's door is open.
Light, ventilation, radio, etc. are switched off.
But Renolink always says:
Padding is invalid and cannot be removed.
Lg. Kalle
@@kaller.9440
make me a video and send it by email.
@@YOYODiagnostic Mail?
@@kaller.9440
I posted my email address everywhere. Next time please search don't be lazy.
yoyo.pc86@gmail.com.
If I give you time, you can also look at the address for at least 1 minute.
Where can I contact you sir to help me
yoyo.pc86@gmail.com
Very good instructions for Laguna.
Trying to add a key for Dacia Duster following your procedure, but keep getting an the following error once i pressed Start Learning .
7F8022 Conditions not set or sequence error.
I'm using a Chinese clone of Renolink:(
Any ideas please?
Thanks.
Hello.
send pictures by email
@@YOYODiagnostic Hi YoYo, where can i find your email address please?
@@adycirstea
yoyo.pc86@gmail.com
@@YOYODiagnostic Hello, Did you solve the problem? i get the same error and i can't find solution online.
Hi friend can I have your WhatsApp number I need your help to programming renault laguna 3 key please
Hi,
unfortunately I don't give the phone number. If you have the Renolink clone, know that you have a 90 percent chance that it won't work.