Jeep Rear Bumper and Tire Carrier Install XRC Smittybilt
ฝัง
- เผยแพร่เมื่อ 19 ต.ค. 2019
- Jeep Rear Bumper and Tire Carrier Install XRC Smittybilt
Come join us in our lasted RockLanding / Overland Project video. We are installing a Smittybilt XRC rear bumper and tire carrier on our 1989 Jeep Cherokee XJ. - ยานยนต์และพาหนะ
Video was awesome I'm installing my tire rack tomorrow was looking for a reference. Keep it up
CAS3ROLL Thanks, good luck with the install.
My friend and i install the same bumper on his xj and it is awesome the only problem we have was the locking system you can see his xj on our little chanel call desvio offroad.
Good job guys on the install.
Did you find a fix for the locking system? I have the same problem...
Jeep looks damn good
I'am not a big fan of jeeps but you knocked it out the park
I'm subb'n👍🏾👍🏾👍🏾
Thanks... :)
Really wish this would work for my ZJ
Heads up these bumpers will not hold the Wavian jerry cans found on Amazon
Can you tell me what Jerry can will fit this bumper?
Where can I find that jerrycan
Since I’m running jk wheels with a 5.5 bolt pattern could I press those wheel studs in? Or will I need to use a adapter
Hi Morgan,
Yes the spare tire carrier has serveral different bolt patterns options that allow for 5x4 or 5x5 wheel bolt patterns that you can press the wheel stud in.
@@5150MotorSports 😊 no one could tell me I was about to buy another wheel adapter you saved me money thank you 🙏
My latch keeps poping open when I drive. Do you have a fix for this? It clicks into place, but after a few min it opens again. Not sure why it does this.
Nice job on the install. How much did that setup cost?
Thanks, Around $800.00 for everything.
Nice job. What did you use for a cb antenna and where did you run your cable for it. Looking to do the same, and there is absolutely nothing out there showing how to do that.
Thanks.... We ran the CB coax cable out down by the passenger tail light and strapped down to the bottom of the tire carrier, then running up in the middle of the rack and attacheched it to the CB Antenna. We used black wire loom and zip ties with the round screw holes, used sheet metal screws to secure the cable to the rack. came out great..
@@5150MotorSports Nice, I couldn't even see the cable in the video, so great job blending it in.
Do you think you could put a tire brake light ring on the carrier like a jk?
Probably, by making a bracket.
What’s the part number for the bomper?
Did this install lower the jeep? I installed one on mine and the weight brought it down about 2-3 inches.
Depending on the rear spring rate, it could lower the right height. In our case it did drop the XJ about in inch… we used rubicon Express lift. Thanks for watching and don’t forget to subscribe…
@@5150MotorSports thanks for the quick response! ✌🏽l like your videos, I’m subscribed 👍🏽
Need any drilling?
Thanks for commenting, it’s been a while since we install this bumper, I don’t thinks so, if so maybe enlarging some holes…
So how’s it holding up a year later???
Been holding up great…👍
How far out from the lift gate does this put the tire?
Around 10”
@@5150MotorSports
Between this one and the EAG, which one do you feel had the better fit and was better quality? I mean as far as all the holes lining up and the hinge, latch pin, latch release and coating?
How many hours did this take
Hi Jacko, I don’t remember exactly but I say about 3 hours. Thank you for watching. 👍
Does this come with a light for the license plate like the JCR ones do?
No, the license plate bracket and light are options.
@@5150MotorSports Thanks!
@@SubdivisionAuto Do you have the link for the plate and mount for LP
what license plate holder is that?
It's made by Smittybilt.
5150 MotorSports did it come with the bumper or did you buy it separate? Just trying to figure out the license plate situation before I put an order in! Lol
Trickghost10
It was separate from the bumper... I don’t remember the cost but want to say around $30.00. Let me know if you need further info I can dig up the part number and cost tomorrow evening?
On a what on a what?? 🤣🤣🤦🏻♂️🤦🏻♂️
Kelvin Sanchez 1989 Jeep Cherokee (XJ).