Hello, i can ask place to buy whole handheld unit for pq-91alrgy ? In general in Poland there is a problem with accessing to those parts. I have problems with batteries, they are lasting for very short time (model bought at 2019 year)
Hi, send me email to: martin@proex.sk We are sending spare parts to Poland, but payment in advance only (to foreign countries), you can pick color: black, gray, white/gray. New handheld unit comes with dust container (& filters) for 101€ or without dust container (no filters) for 80€
Hi, I changed the nozzle, as this stopped working, but it's still no power to the nozzle (no light or rotation). I opened the unit and checked connections but still no power to nozzle. Any suggestions? Thanks!
@@daredynamics it seems as pcb problem, this unit had same problem (sometimes handheld unit works but nozzle doesnt work): th-cam.com/video/IX2kqHSP5ug/w-d-xo.html
ok thank you. I found a unit with defect battery - I will try and change over battery from mine to this one. You think that will be ok? If this doesnt work I will order unit from you@@proexservis
ok, i found a used unit with defect battery. will try to change over battery from mine. You think that would be ok? if not I buy unit from you@@proexservis
Hi, I have a problem with my pq92 - engine is not starting, and when im trying to charge it there is no reaction - before the led lights were glowing while charging. Any idea what part should i check?
Hi, it seems like main board issue, does LED blink when you turn it on? First things first, measure charger (voltage), ok? Then disassemble handheld unit and measure connectivity and voltage of battery pack, if motor is bad then LED blink at least… so charger then battery check, if both things are ok then it is 100% pcb. Did you have that vacuum cleaner unplug too long? Or did you let it on charging station with no electricity (during holidays?) This video could help you, warning: lot of no happening stuff there, fast forward it little bit if nothing is happening at some points (POV series is no cut videos during work day so I am doing a lot of other things in back 🥸) th-cam.com/video/IX2kqHSP5ug/w-d-xo.htmlsi=NaZDBN69ojGRUa93
Hi, it could be contact between hand unit and turbo nozzle, check connection. Or it could be damaged cable in nozzle (most of the time the cable is cut in the part where the nozzle bends). Does that nozzle start & stop or it doesnt work at all?
@@proexservis Hello. I'm having the same problem. Like you said, the cable is cut in the part where the nozzle bends. When the angle of the nozzle reaches 90 degrees, it operates briefly. Can you tell me how to fix this cable? I tried to disassemble the nozzle, but it didn't work out.
@@elano4721 which model? If it is damaged in an accesible place then you can connect it with new one, but if not then it is simpler (I repaired few of these nozzles but once I spent 60-80minutes to replace damaged part and it didnt help) and sometimes it is cheaper to replace entire nozzle…
Hi! Is the battery pack spot welded? My PQ9's battery weakened considerably over time (it's been 3 or 4 years as I have it) and I'm thinking about replacing cells, but I don't have the equipment to spot weld and I need to know beforehand if I have to look around for someone to do the welding. Also do you think replacing old 18650 2100 mAh cells with new 3500 mAh is safe?
Hi, yes, cells are spot welded in plastic holder. It is safe, there is BMS module, but there is still risk that module will not last long (because of age - same for motor plastic parts). Dont know how much will you pay for battery cells only, but at these days you can buy entire handheld unit from new model for around 100€ (new motor, PCB module, battery pack, dust container, filters). And in case you will replace stick from PQ9 to Electrolux600 you will be able to use electric powerMop with this new handheld unit. I recommend upgrading to ES62 and keep the parts from the old handheld unit.
@@proexservis Thanks for reply. I can get 7 tested cells with 3250-3500 mAh capacity for like 20 euro. I don't know yet how much for replacing. From what I know original cells are 2100 mAh so it might be worth replacing old ones to get like 50% more operating time.
@@kamilblk usually they charge around 50€ for battery replacement (with batteries), for me it is better to take entire handheld unit which cost me 55€ if I subtract the filters (15€) and the dust container (30€) from the price 🫰
@@proexservis I'll disassemble battery from the handheld unit and see for how much could someone replace the cells. I might get the entire handheld if the replacement turns out to be expensive. Thanks again. I'll let know how it turned out.
Witam, dziecko odkurzyło sporą ilość wody, odkurzacz przestał działać, jak myślisz spaleniu uległ silnik czy muszę wymienić więcej części?? Do rozkręcenia używasz zwykły torx jeśli tak jaki numer, dziękuję
Hej, U mnie wszystkie diody mrugaja jak jest odłączony od ladowarki. Po odlaczeniu zasilania od bateri wlacza sie 1 raz i ładuje... Po chwili przestaje się włączać i ładować. Aż do resetu zasilania
Didnt see your reply. Probably electronic board fault, if motor doesnt start. Or battery fault, hard to tell without testing. Buy whole hand unit: 4055483749 and you dont need to solder anything. Or buy hand unit from newer model (it is compatible and you get 25.2V battery instead of 21.6V) - 140242265092
@@proexservis I now opened and took out the circuit board with battery, left it out for a day and then installed it and it charged once then wont charge again and blinks as if low on battery
Добого дня. Підкажіть будь ласка чи сам пластмасовий пропеллер можна відділити від валу мотора? В моєму посипався підшипник під вентилятором і я не можу зняти вентилятор щоб подивитись на той підшипник.
здравствуйте, к сожалению нет, пластиковый пропеллер "склеен" с двигателем, деталь поставляется в комплекте: 140249213012 = 4055483277 (одна и та же деталь, разные цены) Eng (if google translation to russian is bad 🫣): Hello, unfortunately not, the plastic propeller is "glued" with the motor, the part is supplied as a set: 140249213012 = 4055483277 (same part, different prices)
no, most likely PCB (circuit board). how long have you had this vacuum cleaner? what model? Нет, скорее всего PCB (схемная плата). как давно у тебя этот пылесос? какая модель?
@@immattatron601 if it does not charge or light up, then 4055483319 must be replaced. or you can replace whole handheld unit 140242265092 (it is cheaper if you add new motor and battery to that price). если он не заряжается и не загорается, то 4055483319 необходимо заменить. или вы можете заменить весь портативный блок 140242265092 (это дешевле, если вы добавите к этой цене новый двигатель и аккумулятор).
Hey, my pq91 won't start after pressing on button. Last time I turned it on it started for a second and then died. What do you think may be a reason? PCB? I haven't measured batteries or engine yet.
Hi, no light? Cannot be turned on inside the stick or handheld unit alone? Best option is to measure motor and batteries, 2x T10 screws in back and you are able to check/measure all parts. It can be problem of pcb only, but maybe battery died
Hello, i can ask place to buy whole handheld unit for pq-91alrgy ?
In general in Poland there is a problem with accessing to those parts.
I have problems with batteries, they are lasting for very short time (model bought at 2019 year)
Hi, send me email to: martin@proex.sk
We are sending spare parts to Poland, but payment in advance only (to foreign countries), you can pick color: black, gray, white/gray.
New handheld unit comes with dust container (& filters) for 101€ or without dust container (no filters) for 80€
@@proexservis sent, thank you
Hi, I changed the nozzle, as this stopped working, but it's still no power to the nozzle (no light or rotation). I opened the unit and checked connections but still no power to nozzle. Any suggestions? Thanks!
Hi, did you measure batteries? Handheld unit (motor) is working without stick (nozzle)?
@@proexservis thank you for quick reply. Not measured battery, seems good and long lasting. Handheld is working alone yes
@@daredynamics it seems as pcb problem, this unit had same problem (sometimes handheld unit works but nozzle doesnt work):
th-cam.com/video/IX2kqHSP5ug/w-d-xo.html
ok thank you. I found a unit with defect battery - I will try and change over battery from mine to this one. You think that will be ok? If this doesnt work I will order unit from you@@proexservis
ok, i found a used unit with defect battery. will try to change over battery from mine. You think that would be ok? if not I buy unit from you@@proexservis
Hi,
I have a problem with my pq92 - engine is not starting, and when im trying to charge it there is no reaction - before the led lights were glowing while charging. Any idea what part should i check?
Hi, it seems like main board issue, does LED blink when you turn it on? First things first, measure charger (voltage), ok? Then disassemble handheld unit and measure connectivity and voltage of battery pack, if motor is bad then LED blink at least… so charger then battery check, if both things are ok then it is 100% pcb. Did you have that vacuum cleaner unplug too long? Or did you let it on charging station with no electricity (during holidays?)
This video could help you, warning: lot of no happening stuff there, fast forward it little bit if nothing is happening at some points (POV series is no cut videos during work day so I am doing a lot of other things in back 🥸)
th-cam.com/video/IX2kqHSP5ug/w-d-xo.htmlsi=NaZDBN69ojGRUa93
Witam. Po wymianie silnika na nowy nie działa elektroszczotka, która przed wymianą funkcjonowała poprawnie. Co może być tego przyczyną?.
Hi, it could be contact between hand unit and turbo nozzle, check connection. Or it could be damaged cable in nozzle (most of the time the cable is cut in the part where the nozzle bends).
Does that nozzle start & stop or it doesnt work at all?
@@proexservis Hello. I'm having the same problem. Like you said, the cable is cut in the part where the nozzle bends. When the angle of the nozzle reaches 90 degrees, it operates briefly. Can you tell me how to fix this cable? I tried to disassemble the nozzle, but it didn't work out.
@@elano4721 which model? If it is damaged in an accesible place then you can connect it with new one, but if not then it is simpler (I repaired few of these nozzles but once I spent 60-80minutes to replace damaged part and it didnt help) and sometimes it is cheaper to replace entire nozzle…
Udało się. Dzięki!!!
Hi! Is the battery pack spot welded? My PQ9's battery weakened considerably over time (it's been 3 or 4 years as I have it) and I'm thinking about replacing cells, but I don't have the equipment to spot weld and I need to know beforehand if I have to look around for someone to do the welding. Also do you think replacing old 18650 2100 mAh cells with new 3500 mAh is safe?
Hi, yes, cells are spot welded in plastic holder. It is safe, there is BMS module, but there is still risk that module will not last long (because of age - same for motor plastic parts).
Dont know how much will you pay for battery cells only, but at these days you can buy entire handheld unit from new model for around 100€ (new motor, PCB module, battery pack, dust container, filters). And in case you will replace stick from PQ9 to Electrolux600 you will be able to use electric powerMop with this new handheld unit. I recommend upgrading to ES62 and keep the parts from the old handheld unit.
@@proexservis Thanks for reply. I can get 7 tested cells with 3250-3500 mAh capacity for like 20 euro. I don't know yet how much for replacing. From what I know original cells are 2100 mAh so it might be worth replacing old ones to get like 50% more operating time.
@@kamilblk usually they charge around 50€ for battery replacement (with batteries), for me it is better to take entire handheld unit which cost me 55€ if I subtract the filters (15€) and the dust container (30€) from the price 🫰
@@proexservis I'll disassemble battery from the handheld unit and see for how much could someone replace the cells. I might get the entire handheld if the replacement turns out to be expensive. Thanks again. I'll let know how it turned out.
@@kamilblk did you manage to change battery without any issues? Was it necessary to plastic weld?
Witam, dziecko odkurzyło sporą ilość wody, odkurzacz przestał działać, jak myślisz spaleniu uległ silnik czy muszę wymienić więcej części?? Do rozkręcenia używasz zwykły torx jeśli tak jaki numer, dziękuję
Hello, best is to measure motor and batteries first. Usually motor is dead after vacuuming water.
Hello, thanks for the quick answear, hope that enige swap will help, I will Let you know
Hej,
U mnie wszystkie diody mrugaja jak jest odłączony od ladowarki. Po odlaczeniu zasilania od bateri wlacza sie 1 raz i ładuje... Po chwili przestaje się włączać i ładować. Aż do resetu zasilania
Hi, does it turn on after charging? Motor starts?
Did you try to start it without stick, only handheld unit?
Hello, my Q9 wont charge, when i press start button the one light goes away. Any ideas?
Which model? PQ91-??
@@proexservis Pure Q9 PG91P40GG
Didnt see your reply. Probably electronic board fault, if motor doesnt start. Or battery fault, hard to tell without testing. Buy whole hand unit: 4055483749 and you dont need to solder anything. Or buy hand unit from newer model (it is compatible and you get 25.2V battery instead of 21.6V) - 140242265092
Hand unit come with filters, battery, motor, board and dust container.
Btw on charging station it shows that it is charging?
@@proexservis I now opened and took out the circuit board with battery, left it out for a day and then installed it and it charged once then wont charge again and blinks as if low on battery
Добого дня. Підкажіть будь ласка чи сам пластмасовий пропеллер можна відділити від валу мотора? В моєму посипався підшипник під вентилятором і я не можу зняти вентилятор щоб подивитись на той підшипник.
здравствуйте, к сожалению нет, пластиковый пропеллер "склеен" с двигателем, деталь поставляется в комплекте: 140249213012 = 4055483277 (одна и та же деталь, разные цены)
Eng (if google translation to russian is bad 🫣): Hello, unfortunately not, the plastic propeller is "glued" with the motor, the part is supplied as a set: 140249213012 = 4055483277 (same part, different prices)
@@proexservis No problem) I don't like russian language) Thank you for your quick answer!) Have a nice day! =)
Что может быть ? Работал и просто перестал работать. Может дело в моторе? И не заряжается, не горит индикатор зарядки.
no, most likely PCB (circuit board). how long have you had this vacuum cleaner? what model?
Нет, скорее всего PCB (схемная плата). как давно у тебя этот пылесос? какая модель?
@@proexservis Точно такая же как и на видео. Около года.
@@immattatron601 if it does not charge or light up, then 4055483319 must be replaced.
or you can replace whole handheld unit 140242265092 (it is cheaper if you add new motor and battery to that price).
если он не заряжается и не загорается, то 4055483319 необходимо заменить.
или вы можете заменить весь портативный блок 140242265092 (это дешевле, если вы добавите к этой цене новый двигатель и аккумулятор).
@@proexservis Где можно взять этот блок? И сколько он стоит? Я так понимаю это плата вся, возле аккумуляторов?
@@immattatron601 PCB (circuit board) around 55-65€, whole handheld unit around 100-110€.
Prices here in Slovakia.
Hey, my pq91 won't start after pressing on button. Last time I turned it on it started for a second and then died. What do you think may be a reason? PCB? I haven't measured batteries or engine yet.
Hi, no light? Cannot be turned on inside the stick or handheld unit alone? Best option is to measure motor and batteries, 2x T10 screws in back and you are able to check/measure all parts. It can be problem of pcb only, but maybe battery died
@@proexservis just dissassemblied the handheld. Motor bearing failed completely. Batteries are good. Will try to check later if PCB didn't fry.