I am shamed to say I had this in my garage in a box for about 3 years... today I finally installed it all by myself (yes ME) and the help of two TH-cam videos yours and Chamberlin. Thanks!!!
Good video, high production value if I may say so. I installed sectional doors and old school chain drive and screw drive openers back in the 1990's . I was just brushing up to make sure i get it right. Thanks bro it all fell into place except for the belt I would have screwed up the master link part.
Kona: "Bruh, it's a clevis pin. Celvis is that dumb shitzu next door!" 😂 Clevis, celvis, tomato, tomato ... Just bought one of these. Good video. Can't wait to install it.
LoL!!! Roy you got me on that one haha! Great to hear and thanks so much for watching and the support. Good luck on your project and let me know if you have any questions.
You forgot to release Chamberlain Belt Drive Garage Door Opener Spring Loaded Trolley Auto Adjust Also it's a Clevis pin. Lastly, being you're installing 2 GDO'S, ensure you install the sending (amber color) sensors from center pointing away from other door. This way, the receiving (green color) sensor doesn't attempt to receive the other GDO's sending (amber color) sensor.
You missed a very important part that you didn’t do. It was labeled all over the parts list not to forget. The spring needs to be released so it can get proper tension after expanding. Otherwise great video!
You installed 2 new GDO, my question is can you hook one wall mount button by the door that goes into the house and use or for both doors? Or do you have to have both wall mounts hooked up ?
first "cleevis" then kelvis lmao killing me! It's pronounced "Cleh-vis" now we both taught each other something today. Great video, swear im not a word nazi - I work in fluid power and hear the word clevis daily.
I noticed that is seems like you didn't install the battery backup until the very end. Will the opener function without the battery installed? I don't want a battery in mine, but you can't by them without backup batteries here in the People's Republic of California. If you leave the battery out, does the opener keep warning with lights, beeps or alerts?
Great to hear and thanks so much for your support Scott. Here is a link to the radiant barrier I used. Its actually not streatchy at all but it worked out great! amzn.to/30Cqm1F
Great to hear and thanks for watching Matt. There is a link in the video description at the very bottom on where you can find that beat. Thanks for the support and hope you subscribed.
There is two things you could adjust the way you attach the stray door arm you did it incorrectly you’re supposed to put the door arm in the center between the two slots of the trolley and then you install the cotter pin and then depending you can shorten your door arm all the way down to the last hole or depending flip it around and you want your dorm to have a decent angle but a good thing to do is at least put this straight door are in between the two pieces of metal on the trolley
You don't need a subscription for the camera to work but I think you do if you want the camera to record for extensive periods of time. It has its own app so the wifi is connected through that but I'll double check with google. Thanks for watching and hope you enjoyed the video.
If I let you know really great video but if you wanna know a few tips you do not need the door arms to be so far out like that you can actually have the door arms closer in to the door and if you worry about neatness you can cut off the actual door arm to make it look good and then with the safety sensors you actually want to leave about a foot of wire and you want to pigtail it because if something gets caught on the safety sensor wiring you will pull it out But if you do not have any more wire in the garage door opener then leave it as is but if you have plenty of wire just do the step backwards and add that and then you will be set to go
Great tips Zackary and thanks so much for letting us know. Based on your TH-cam channel you have WAY more experience in garage door openers then I do so I greatly appreciate your input.
I actually looked at the video again actually you have your straight door arm installed incorrectly it’s not supposed to be installed on the outside of the trolley is supposed to put it in the center between the two holes can you slide the cotter pin for one hole through the door arm and threw the other hole So the way you have your door arm Installed you can move the holes all the way down to the last pair then mark off with a little marker at the end of the straight piece of the door arm and cut it with a hacksaw or a angle grinder then you won’t have to worry about it going through the door or hitting your head on it and then on the opener there is a stop bolt that you’re supposed to install
LoL! Noted!! Thanks for the tip and I’ll remember that one the next time I run into this type of pin haha. Thanks for watching and hope you enjoyed the video.
Yes, you did get paid by Chamberlain, in the form of two free $300+ garage door openers. I'll make the assumption that you don't need to send them back.
And I'll make the assumption that you knew what type of payment I was referring to Gazzlo. Yes you can consider free product a form of payment but please know I handle brand partnerships very seriously. A brand that provides free product vs a brand that provides free product and payment may have very different requirements on what I say and how the video is presented to the audience. I am extremely grateful for the opportunity to work with Chamberlain on this project but since they are only providing free product that means they have no input on what is presented to my audience and you are getting the truest sense of how I feel about the product. Hope that makes sense and thanks for watching. Hope you enjoyed the video to.
If your serious please know I have no control over the ads that are being shown. TH-cam does that for all TH-camrs. Thanks for being a subscriber at least :)
BYOT Ok. Thank you for your response. I have to say, I enjoy your videos. TH-cam needs to understand that they should not offend their viewers. It will hurt people like you. Please make them aware of their potential harm to people like you. I honestly thought that you were a hater (maybe you are but I don’t want it in my face 😉). I will re-subscribe. Again, thank you 🙏 for your response. Also, your technique is excellent. Mark
I am shamed to say I had this in my garage in a box for about 3 years... today I finally installed it all by myself (yes ME) and the help of two TH-cam videos yours and Chamberlin. Thanks!!!
Great to hear you took it on yourself and thanks so much for your support. Glad the video helped and hope you subscribed :)
I Love you 🧡
Good video, high production value if I may say so. I installed sectional doors and old school chain drive and screw drive openers back in the 1990's . I was just brushing up to make sure i get it right. Thanks bro it all fell into place except for the belt I would have screwed up the master link part.
Great installation video! 😃👍 Very thorough and detailed! 💯
It works great and is easy to operate
Awesome video, very informative, thank you for doing it.
Good install I’m getting one
Great video! Thanks.
Great to hear Michael. Thanks so much for watching and subscribing.
My dog is Kona too! And I just bought this model! Lol
So informative! Love this video. You have a new subscriber, oh and I also clicked on the 🔔
Thanks. Looks very simple. Like the camera unit. Looking to replace my noise opener. Really like the camera feature. Is it motion activated?
Kona: "Bruh, it's a clevis pin. Celvis is that dumb shitzu next door!"
😂 Clevis, celvis, tomato, tomato ... Just bought one of these. Good video. Can't wait to install it.
LoL!!! Roy you got me on that one haha! Great to hear and thanks so much for watching and the support. Good luck on your project and let me know if you have any questions.
I thought it was an Elvis pin 😁
cElVis PiN
You forgot to release Chamberlain Belt Drive Garage Door Opener Spring Loaded Trolley Auto Adjust
Also it's a Clevis pin.
Lastly, being you're installing 2 GDO'S, ensure you install the sending (amber color) sensors from center pointing away from other door. This way, the receiving (green color) sensor doesn't attempt to receive the other GDO's sending (amber color) sensor.
Thanks for the helpful tips Charles. Great note on the sensors. Thanks for watching and hope you enjoyed the video.
nice video..
great video bro
Great to hear Brett and thanks so much for watching!
Yes
Awesome video. New subscriber
Great to hear and thanks so much for your support. Its greatly appreciated.
You missed a very important part that you didn’t do. It was labeled all over the parts list not to forget. The spring needs to be released so it can get proper tension after expanding. Otherwise great video!
Was about to post the same thing
You installed 2 new GDO, my question is can you hook one wall mount button by the door that goes into the house and use or for both doors? Or do you have to have both wall mounts hooked up ?
Wish they did the screw version instead of the belt. I haven’t personally used one yet, but apparently it’s smoother and a lot quieter.
Love how you over e·nun·ci·ate on the voice over.
nice job!
Great to hear coming from a co angel dedicated to garage door openers. Thanks for watching.
lol 😂
A bodybuilding trophy? Videos or it didn’t happen! 💪😉👍
Ooooo pictures are out there and available to the public. You just need to know how to google it..... lol!
first "cleevis" then kelvis lmao killing me! It's pronounced "Cleh-vis" now we both taught each other something today. Great video, swear im not a word nazi - I work in fluid power and hear the word clevis daily.
I noticed that is seems like you didn't install the battery backup until the very end. Will the opener function without the battery installed? I don't want a battery in mine, but you can't by them without backup batteries here in the People's Republic of California. If you leave the battery out, does the opener keep warning with lights, beeps or alerts?
What a great video but honestly those knee pads are killing me 😂😂😂.
Enjoying your channel. Random question: What is the radiant barrier product you're using? It looks pretty stretchy / flexible.
Great to hear and thanks so much for your support Scott. Here is a link to the radiant barrier I used. Its actually not streatchy at all but it worked out great! amzn.to/30Cqm1F
does it support homekit/alexa? Also do they charge a subscription of $10/year?
Nice video! What’s that sweet beat at the end?
Great to hear and thanks for watching Matt. There is a link in the video description at the very bottom on where you can find that beat. Thanks for the support and hope you subscribed.
nice
Thanks so much for watching.
There is two things you could adjust the way you attach the stray door arm you did it incorrectly you’re supposed to put the door arm in the center between the two slots of the trolley and then you install the cotter pin and then depending you can shorten your door arm all the way down to the last hole or depending flip it around and you want your dorm to have a decent angle but a good thing to do is at least put this straight door are in between the two pieces of metal on the trolley
wow beautiful
Great to hear and thanks for the continued support Fab.
Do you have to pay a subscription to use the camera? Also do you know if you can use Google to open and shut them free or do you have to subscribe?
You don't need a subscription for the camera to work but I think you do if you want the camera to record for extensive periods of time. It has its own app so the wifi is connected through that but I'll double check with google. Thanks for watching and hope you enjoyed the video.
If I let you know really great video but if you wanna know a few tips you do not need the door arms to be so far out like that you can actually have the door arms closer in to the door and if you worry about neatness you can cut off the actual door arm to make it look good and then with the safety sensors you actually want to leave about a foot of wire and you want to pigtail it because if something gets caught on the safety sensor wiring you will pull it out But if you do not have any more wire in the garage door opener then leave it as is but if you have plenty of wire just do the step backwards and add that and then you will be set to go
Great tips Zackary and thanks so much for letting us know. Based on your TH-cam channel you have WAY more experience in garage door openers then I do so I greatly appreciate your input.
BYOT yeah no problem
I actually looked at the video again actually you have your straight door arm installed incorrectly it’s not supposed to be installed on the outside of the trolley is supposed to put it in the center between the two holes can you slide the cotter pin for one hole through the door arm and threw the other hole So the way you have your door arm Installed you can move the holes all the way down to the last pair then mark off with a little marker at the end of the straight piece of the door arm and cut it with a hacksaw or a angle grinder then you won’t have to worry about it going through the door or hitting your head on it and then on the opener there is a stop bolt that you’re supposed to install
And on the second garage door opener you installed you put the emergency release handle upside down
I have the same thing
Nice video but their directions specifically say the rail should slope slightly and should not be level @6:06
That looks like a lot... I think I may just hire "the guy" lol.
The first one was a lot Lona but the second one was supper easy compared to the first. Just so you know :) thanks for warching
Hey u have a house in the pa area would you come install this for me?
How’s Monday sound? Haha! Thanks for watching Donovan and hope you enjoyed the video.
The door arm angle is a little too big. If you decrease the angle you will be able to get the door to open all the way
It’s a clev-is pin.
Kelvis left the building. Clevis...pronounced clevis...sounds nothing like Elvis :) Ask the tractor guys
LoL! Noted!! Thanks for the tip and I’ll remember that one the next time I run into this type of pin haha. Thanks for watching and hope you enjoyed the video.
ayyyyy
Thanks so much for watching and subscribing!
Kona. "I need to pre, let me out"
LoL! Definitely at the top of the list for Kona haha! Thanks for watching Peter and hope you enjoyed the video.
Low head room
Kona: "Must find WiFi password so I can take selfies on garage cam"
Those would be some good selfies haha! Thanks for watching Di!
Ahead drumsticks??
14:00 Kona is thinking “you feeling yourself much?”
Clevis pin not Celvis pin......Cle-vis not Kel-vis as in Clever ie clevis
Yes, you did get paid by Chamberlain, in the form of two free $300+ garage door openers. I'll make the assumption that you don't need to send them back.
And I'll make the assumption that you knew what type of payment I was referring to Gazzlo. Yes you can consider free product a form of payment but please know I handle brand partnerships very seriously. A brand that provides free product vs a brand that provides free product and payment may have very different requirements on what I say and how the video is presented to the audience. I am extremely grateful for the opportunity to work with Chamberlain on this project but since they are only providing free product that means they have no input on what is presented to my audience and you are getting the truest sense of how I feel about the product. Hope that makes sense and thanks for watching. Hope you enjoyed the video to.
lol its not kell-vis pin!
Probably a dumb question. Why were you wearing a mask in parts of the video? Too close to the insulation or something?
You're killing me with the pronunciation of Kel Vis pin.... It's a Clevis pin....not cleevis or Celvis.
I am unsubscribing. Joe Biden Ad?!
If your serious please know I have no control over the ads that are being shown. TH-cam does that for all TH-camrs. Thanks for being a subscriber at least :)
BYOT Ok. Thank you for your response. I have to say, I enjoy your videos. TH-cam needs to understand that they should not offend their viewers. It will hurt people like you. Please make them aware of their potential harm to people like you. I honestly thought that you were a hater (maybe you are but I don’t want it in my face 😉). I will re-subscribe. Again, thank you 🙏 for your response. Also, your technique is excellent. Mark