Co2 Fire extinguisher || Why CO2 Fire Extinguisher don't have pressure gauge? Complete Details

Co2 Fire extinguisher मे Pressure Gauge कयो नहीं होता।
Co2 Fire extinguisher मे Pressure Gauge कयो नहीं होता।
why co2 fire extinguisher don't have pressure gauge
The gauge is there to indicate that the original charge of propellant gas (usually compressed air) is still there at the correct pressure. ... CO2 extinguishers have no gauge because they are filled with liquefied CO2. C02 is a gas at room temp until it is compressed to around 730 psi.
Why is there no pressure gauge on a CO2 fire extinguisher?
#CO2 Fire Extinguisher
#Co2 NO Pressure gauge
#HSE TRAINER

[@amolbhalekar2973]

Excellent 👍👏

[@technologygadgets4146]

Good explaination sir...well explained keep it up ,May Allah gives you more and more Success in your life

[@hsetrainer1593]

Thanks for appreciation

[@sheiksha6784]

Good sir

[@hsetrainer1593]

❤️

[@hseexpert428]

830 psi

[@amolbhalekar2973]

🎉 very nice 👍

[@chandrabhanuopstar3108]

Thank you sir

[@Nasirchris]

Very Nice 👍 bro

[@rajupatnaik7776]

Is there a possibility of a person fainting while discharging COs , esp. in a closed environment? If yes, please suggest safety tips.

[@hsetrainer1593]

Exposure to Carbon Dioxide in confined space can cause headache, dizziness, difficulty breathing and tremors. Higher exposure can cause convulsions, coma and death. changes and loss of vision.
First of all there install automatic co2 releaser there is electrical setup in confined place (room) when happend fire release automatic co2 must go to outside from the room…
Second scenario use self contained breathing apparatus (SCBA)

[@rajupatnaik7776]

@@hsetrainer1593 , thanks for the information, but please rewrite the 2nd para properly. It's unintelligible!

[@rajupatnaik7776]

While putting off fire is there a diff. in the duration of pressurised discharge (in a Non-CO2 Extinguisher) depending on how I've pressed the Handle?
To be more specific, what if I press it for 1 Second only and then again repeat the same? And what if I keep the Handle pressed for several seconds?
Will there be any diff. in the duration of pressurised discharge? In the first instance, will there be little or NO Pressure when I press for the 2nd and 3rd time?

[@hsetrainer1593]

The emptying time of a fire extinguisher depends on its capacity. For example, the time of a fire extinguisher is thirty seconds. If you press it once, it will empty in thirty seconds and the best way is to use full pressure and material together comes out, If you push again and again, the time of the fire extinguisher will remain the same, but there is a lot of difference in the work efficiency.

[@rajupatnaik7776]

@@hsetrainer1593 , whether 30 seconds or not depends on Capacity of the Extinguisher. A 1 Kg cannot release material for 30 seconds.
I suggest that you Reread my previous Post and reply properly.

[@VinodKumar-SS8859]

Sar iske andar gas thandi hoti hai isiliye pressure gauge nahin lagaya jata kyunki vah janmdata hai

[@vishalkumarsingh3227]

830 psi hota ha

[@Crypto.In4mation]

830 psi

[@Indianuser506]

830 psi

[@hsetrainer1593]

❤️