Class 16 | Hydraulic Calculations for Sprinkler Systems
ฝัง
- เผยแพร่เมื่อ 5 ต.ค. 2024
- In this video, we'll be discussing the basics of hydraulic calculations for sprinkler systems. We'll discuss the types of calculations that are necessary for designing, installing, and operating sprinkler systems.
If you're tasked with designing, installing, or operating a sprinkler system, this video is for you! We'll cover everything you need to know to make sure your system is operational and safe. After watching this video, you'll be able to perform simple hydraulic calculations for sprinkler systems with ease!
Your Queries:-
fire fighting
hydraulic calculations for sprinkler systems
manual procedure,sprinkler system
hydraulic calculations
fire sprinkler system design calculation
sprinkler system design calculation
hydraulic calculation
hydraulic calculations for sprinkler system
nfpa 13 sprinkler calculation
sprinkler system hydraulic calculations
hydraulic calculation of sprinkler system
sprinkler system design
fire sprinkler system design
nfpa 13 hydraulic calculations
fire sprinkler hydraulic calculations
Area Density Curves / Area Density Method
Steps to Determine Total Water Demand and Total Volume of Water Required
Hose Allowance to be considered as per NFPA13
Common Area Adjustments for special cases
FireSprinklerSystem
designtutorials
MasteringFireDesign
stepbysteptutorial
firesafety
fireprotection
FireSprinklerDesign
buildingsafety
LifeSafety
FireEngineering
FireSuppression
#FireCodeCompliance #youtube #hydraulic #firefighting #sprinklersystem #fireprotection #nfpa #sprinklers #sprinkler #firesprinkler #trending #construction #firefighting #fireengineering #fire #mep
• Class 2 | Hydrant Flow...
Thanks for the important video.
Please make videos for fire hydrants hydraulics calculations.
Thanks for your suggestion. I will make a video in next session
Excellent work and go ahead . I do appreciate you can make it with little animation ❤ I know it’s hard . One more thing make specific occupancy for whole calculation for audience
Thank you for your very informative video tutorial. I hope you make a different system tutorial also.
-Subscriber from philippines.
Thank you very much for your feedback. Yes iam going to share videos on fire pumps as well. In case if you want to learn about any other system please let me know
@@irfancfps if you could do the explanation ang sample calculation for
1. Standpipe system
2. Clean agent system
3. Aerosol fire supression system
4. Foam fire suppression system
5. Deluge system at transformer
6. Pre action system
7. Mist system
@@yowmamen4767 Preaction system, Deluge system already available in my training series of NFPA13. Regarding the other systems & calculations i will make videos and upload asap.
@irfancfps Ramadan Kareem, can you guide me for cfps exam
Very Essential Video... Please Next video link hydraulic calculation procedure for Sprinkler (Manual)
In sha allah ok I will upload. Thanks for your comment
As per NFPA, Hydraulic calc is required only for extra hazard, and pipe schedule method for Light and ordinary hazard, But for verification of existing system we can use hydraulic calc for all hazards.
The pump selection and pipe sizing has to be done considering hydraulic calculations only for the new buildings even for light/ordinary or extra hazard.
For existing systems you can use pipe schedule method for pipe sizing..
But as per NFPA, you can't use pipe schedule method for extra hazard.
@@Bestmotivationalquotes874 Yes i totally agree with you.
Very good video. If I have a 5 floor building, the first floor is parking and the other 4 are apartments. I should calculate the GPM of every floor and summarize them or I just calculate the more hazardous place?
Please check the full videos of hydraulic calculations from step 1 to step 11 which is available on my TH-cam channel. I will find the clarity. Thanks
well simplified and presented!
Thank you
thank you mr irfan
Welcome
Did u guys learn any thing new? Let me know❤
Hallo sir, I have one doubt regrading hydrant calculations.
What is base for K value of hydrnat does it is given in nfpa.
And it does have relation to moc of hydrnat like ss or gun metal
Hydrant k doesn’t depend on moc. K factor will be calculated based on flow requirement and residual pressure requirement (@20psi). When u have Q and P u can calculate K
Noted with thanks for your valuable inputs and reply sir
What if there is a network combined with fire hydrant outside building and ,spinkler, and fire hose cabinet inside building. What is the step of calculation.
? Is it one by one or possible combine?
Cant be explained in one sentence.
Please check the playlist " Hydraulic calculations Elite fire: Below are the links
Sprinkler systems
th-cam.com/video/IvtVit2Hjgo/w-d-xo.html
Fire Hose Cabinets
th-cam.com/video/gFKE2OcYYcw/w-d-xo.html
Fire Hydrants
th-cam.com/video/gQj9BgpoBi8/w-d-xo.html
Standpipe system
th-cam.com/video/WhaIwHOvdmE/w-d-xo.html
Learn how to use Elite fire software
th-cam.com/video/ew4A3gsxuIM/w-d-xo.html
Where's the next part??? "hydraulic calculation procedure for Sprinkler (Manual)"
You can find on my channel playlist “hydraulic calculations “
Did u check? Are u able to find the playlist? Let me know
which addition is this?
In all editions u will find this
Where is the friction loss consideration?
Friction losses are considered for calculating the head/pressure. Please check my video on friction loss calculation.
Below is the link:-
th-cam.com/video/RJ7jzO795D0/w-d-xo.htmlsi=RzVwpl8LzMGonRIy
Sir what is hose stream allowance???
Hose stream allowance refer to hose flow.. u can find details in nfpa 14. Sprinkler system demand will be added to hose flow demand to get total demand
Assalamualaikum please add notes pdf in description.
Walekumassalam. U can download the video. I will check regarding u r request