SSX 23 disassembly and upgrades
ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2024
- In this video I open up the ssx 23 and show you how to do so. I also show some easy modifications you can do to improve your overall performance of your ssx 23.
Link to comparison: COMING SON
Hope you found this useful.
Files: Gass router spacer www.thingivers...
You should do a full mag disassembly video
Tack!
Thumbs up!!!!
The thing is. Shipping from Norway is ridiculously expensive.
Nice video thanks buddy
Novritch made the hop up plastic, so when you easily strip it, it cost you almost $20 to ship. While it cost him less than $2 dollars to make...
Also no metal alternative, thanks bro🤨
You need to help me out here bro,
What do you mean by easily strip witch part? And if you got tricked thinking that i can help you out with metal upgrades I'm sorry to say that i can't.
If there is annything else, just ask👍
The internals are made of cheap plastic. The nozzle that goes into the bucking, also the hip up itself. I am pretty disappointed with him. He makes the parts of out cheap plastic so you keep replacing them...made to break.
It's truth to what you say. I suspect he made a metal slide, a weird hop plate, changed the barrel and overpriced it. The rest is stock asg/stti.
So you need to be super care full when you tech on it, unfortunately.
Thx ✌
Np
Very good video. I only wish that I could see how the magazine release fully works as mine (when I put my magazine), the magazine release lever is not springing back and holding the magazine in place anymore. It keeps falling out and don't know why? Can you give me any help?
The first thing that comes to mind is that you lost your spring on the release mechanism. It is not known to be top notch secured im afraid. So with some bad luck it can be poked out with a branch or such. If you see my video on the paint jobb you se the mechanism there.
Hope this helps.
@@RobinBerntsen Thanks for getting back to me so quickly. Well, I never lost the spring. It's pretty well jammed in the release lever. But couldn't find out how to re-secure the spring to some kind of back plate to add the proper spring pressure to make sure the release lever stays in place. I think I figured it out though and it's working fine for now. My only concern, is that the spring really doesn't have a holding place. It could easily pop out again. I guess I'm going to have to drill some kind of hole just wide enough for the spiring to have a place to be held. I don't know why Christoph (the owner), didn't figure this out? Oh well, at least it works now. Thanks again, for getting back to me.
Np. Glad it works for now. I know that Novrich came out with a v2 spring, have no idea how good that is.
Had another question. Why did you use PTFE tape for the seal? Is there any improvement using it?
The ptfe tape is more for a second incuranse for a good seal. Most likely it dosent do mutch. But it should help with the consistancy. If you use to much you can get a worst resoult. It also depends on the seal of your bucking. I got a flamingo on my ssp and that was actualy not 100% seal. So i figured to just be safe (probably because a harder mixture). But with the ml super bucking i havent got a problem yet.
I also have a question.
My magazine can do only 40-50 shots per fill up... I followed every signle step on novritschs video where they explained how to fill up magazines the right way... And still, I am able to shot just 40-50 shots.... Any fix ?
If possible open the mag and see if the spring is blocked by something. Ps i don't got the Novritsch ssp18, but i would suspect the mags are very similar. I have not open those extended mags before.
@@RobinBerntsen Sorry that I didn't mention which replica I am using. I am using SSX23 with original mags (didn't modify anything)
So that means, one gas fill up, two mags shot and my gas is gone...
Aaaaah. Now i follow. Thought it was the aep you were talking about . 40-50 shots don't sount to bad. Personaly i changed to the tm ones a long time ago, more reliably.
If you're getting 40 consistent shots you should be happy. I topp of the mags when i got the opurtunity to keep the shots ass consistent as possibly.
Sorry for my misunderstanding.
How much for a curved nub plate thingy And fart flat?
answered your wrong post.. I just checked out the postal service. And a letter is not that bad 4$ ish. but now i need to get a couple of hours sleep. so i will talk to you later^^
Would you be willing to share your 3D print design for the port seal spacer?
Do you mean the gass router spacer?
I'm going to. Just haven't done it yet
@@RobinBerntsen Exactly. That would be amazing. The fart flap design would be really cool too if you wouldn't mind! Great video by the way.
The fart flap is going to be locked in the walt. But the rest I'm going to make public. Can see what manage to do later today.
If you want you can maybe get a test sample of the fart flap for testing purposes.
I uploaded the "gass router spacer" to thingiverse.
www.thingiverse.com/thing:4604683
How many joules does it have?
@robertoproietti4924 That depends on the ambient temperature, gass used and bb weight.
On standard green gass I think it's somewhere between 0.7J on days below 10C° and 1.2J on days over 30C°.
But it's a lot of variables.
@@RobinBerntsen I asked you, because on the Novritsch website there are two purchase options, the 1.5 joule and the 1.7 joule, but perhaps these are intended for the German market
@@robertoproietti4924 That may be the high power one.
MY slide keeps getting stuck, can you tell me how to fix it
Sorry i haven't seen your comment, usually thy pop up on my phone.
I dont really know what you mean by stuck, but the slid can be a little wonky to get off and on.
@@RobinBerntsen like when I pull it back, the slide won’t go back forward, I’ll just like lock up in the back like what you showed in the video
Is it the stti or ssx you got?