I have a few cars that I would like to race with , but everytime the launcher hits them , they start doing flips , is there a way to add weight to some of these hot wheel cars ? By the way I have 3 Baja bisons and they are pretty fast , cool racing video man , I just subbed , any advice or tips are much appreciated
There are a ton of videos on how to modify cars out there, I just haven’t made one for that reason. Take a drill that matches the rivet size and drill it out. You can either tap the post inside with a 2-56 tap or use an adhesive to hold it when you put it back together. Try to avoid any super glue because it leaves a film when it sets up. Once the car is open there will be room for weight and it is concealed inside. You can take out any interior you don’t want. I bet you can add a lot of weight in the BaJa. Keeping the weight low will help and avoid it being top heavy. Good luck and have fun!
Found two of those Bisons, nothing special at least from those two. I have slowly build my weight classes and I just do it simple, if weight starts with 3 it's 30g, with 4 it's 40g and so on. So they are "true" for that particular weight, no overlapping.
@@Bavarian_Diecast_Racing it will be. It’s just time consuming knowing several cars that barely missed out will need to be revisited. Thanks for the support!
I need a few more of those cases........Soldier 76 gets faster as you rework it.....as far as ranking you really have to do what makes sense to you cuz at the end of the day, we all have to weigh in when it comes to competition....
@@dxpdiecastracing Gotcha Sounds good. I have a few I can send in. Id like to get some times on your track as well. Im on Redline Derby as D_Built_Garage.
You're fortunate to find so many Bisons. I haven't even seen one yet.
Great racing as slways Dale!
I bought all I found at Target a couple of weeks ago. My Wal-Marts and Dollar Generals are sloooowwww!
@@dxpdiecastracing Our DG's have been bare all year. Every single one of them last stocked back in October.
@@yournightmareracing1754 seems like mine are either bare or stuck on earlier cases. I found one putting out P case from last year.
Or it might have been M cannot remember but disappointing either way
Awesome find bro and nice race cars bro,cool collection ,have a great weekend bro,cool racing
Thank you Zelda!
I haven't been able to find a Bison yet. Hopefully, my luck will change. Nice haul Dale!
Keep looking, they will probably be around for awhile.
I have a few cars that I would like to race with , but everytime the launcher hits them , they start doing flips , is there a way to add weight to some of these hot wheel cars ? By the way I have 3 Baja bisons and they are pretty fast , cool racing video man , I just subbed , any advice or tips are much appreciated
There are a ton of videos on how to modify cars out there, I just haven’t made one for that reason. Take a drill that matches the rivet size and drill it out. You can either tap the post inside with a 2-56 tap or use an adhesive to hold it when you put it back together. Try to avoid any super glue because it leaves a film when it sets up. Once the car is open there will be room for weight and it is concealed inside. You can take out any interior you don’t want. I bet you can add a lot of weight in the BaJa. Keeping the weight low will help and avoid it being top heavy. Good luck and have fun!
Always enjoy your sessions! I don't see modern Ultra hots down here, but Gee, that one was disappointing!
Cheers Marc D
Most are unfortunately!
@@dxpdiecastracing Cheers, thx DXP. I guess trying to recreate the past, but in looks only!
@@cutrockr-diecastracing2773 the spectra flame paint looks really good. It’s something for the collection I guess.
Picked up a few bison's opened one up to modify will see how it runs
Added weight will help it!
@@dxpdiecastracing exactly what I'm planning on doing, thanx bro
Found two of those Bisons, nothing special at least from those two.
I have slowly build my weight classes and I just do it simple, if weight starts with 3 it's 30g, with 4 it's 40g and so on. So they are "true" for that particular weight, no overlapping.
This I like!
That’s pretty much how I do it. But I always say do it however you like.
My new case is up, still deciding….
@@dxpdiecastracing However you‘ll sort them, Dale, it’ll be fun filling this case … 😉
@@Bavarian_Diecast_Racing it will be. It’s just time consuming knowing several cars that barely missed out will need to be revisited. Thanks for the support!
I say add the new case. It will allow us to watch more racing from you while you sort out the placement 🙌
Done my friend.
Keren jalur drag.nya
Ooo apa maksud dr T1, T2, T5 itu bang..???
That was the way I could distinguish which one was which without confusing myself.
Been passing up that Bison but that 76 is nowhere to be found down here. Maybe that new case needs to be for modified mail-ins 🤔🤔
Check your Krogers if you have em.
Great racing not easy getting into your cases they’re really fast The invader might do better if it had the two large wheels in front
I completely agree! Those small wheels are tough to find speed with.
I need a few more of those cases........Soldier 76 gets faster as you rework it.....as far as ranking you really have to do what makes sense to you cuz at the end of the day, we all have to weigh in when it comes to competition....
Well nothing makes sense to me 😵💫 Lady was wanting to get rid of it and I got it cheap!
I’d love to race your 62 and over class. Can I send in a few cars?
Also if you have a modified class of 80 grams or less, that is my preferred class.
@@RuggedLuxuryD I got a bunch of modified 70g and under. Anytime you want to feel free.
@@dxpdiecastracing Gotcha Sounds good. I have a few I can send in. Id like to get some times on your track as well. Im on Redline Derby as D_Built_Garage.
Baja bison t5 real life