Perfect been searching for weeks to find a video that details everything I installed these on my gilera and this video confirms I did it all correctly thank you 🙏
@@ilzarro On my Derbi Atlantis,that use the piaggio motor. Dellorto 19/21mm carbs bolted on the intake like the stock carb. Also used the stock airbox.
see at the 3:00 mark, the base sleeve rotates at the bottom of the spring, there are notches which set the tension and effectivley load or unload the spring.
hallo vor TGB ......and if I put a longer belt on now it is 760mm.have found 1 of 764mm of polini.i really don't understand why I only go 60km with 70cc and unbounded exhaust
@ is it worth it to remove the oil tank? Already have the oil pump disconnected but still there and the lines removed. Really just two bolts too remove the tank but i dont know if its worth it
Perfect been searching for weeks to find a video that details everything I installed these on my gilera and this video confirms I did it all correctly thank you 🙏
Ahh good stuff, thanks for watching🙋
Thank you man for these type of videos i think they are special and relly helpful! i would like to se more content like this on youtube. Good job
Thanks Wiggo, we greatly appreciate the support.
make a video on how to mount a phbg carburetor on a piaggio typhoon/zip!
Ok, we will add it to the list👍
Yes plz!
@@ilzarro On my Derbi Atlantis,that use the piaggio motor. Dellorto 19/21mm carbs bolted on the intake like the stock carb. Also used the stock airbox.
What on earth are those drivers you've got there?!😂 But seriously I appreciate your videos!
😆😂
Well what are they!
@@billyclifford6106 What are you talking about specifically? tell me the minutes and seconds?
Another gem😁
👍
Good video thanks. Only thing is I don't have an impact driver. Is there another option to remove the top nut.
Use a long lever on the wrench. Best idea is to use the a correct tool. If you buy a tool you will use it in the future so it is a good investment.
No need for any impact drivers, just put the shockabsorber under pressure by putting weight on it, and use a 13mm socket to undo the nut.
Good tip✌️
Thanks .... I'll try this as I don't have an impact driver
Super. Perfekt! Danke!
Welcome.👍
would you know if there would be any issues if i want to install a 365mm shock absorber if the factory shoock absorber is 400mm?
The ride will become weighty at the front end and check for body clearance with full downward pressure at the rear end, make sure nothing bottoms out.
@@scooterstreetau thank you so much
Hi guys how do adjust the stiffness adjuster? just fitted my shock
see at the 3:00 mark, the base sleeve rotates at the bottom of the spring, there are notches which set the tension and effectivley load or unload the spring.
hallo vor TGB ......and if I put a longer belt on now it is 760mm.have found 1 of 764mm of polini.i really don't understand why I only go 60km with 70cc and unbounded exhaust
You asked the speed question on another video, already answered!
@@scooterstreetau yes nothing of tips.i don't know anything more
Has the owner of the bike removed the oil tank? If so is it worth it, i am mixing myself and want to remove the oil tank aswell
Yes it has been removed and running premix. Removed oil system completely. Tank, pump, lines.
@ is it worth it to remove the oil tank? Already have the oil pump disconnected but still there and the lines removed. Really just two bolts too remove the tank but i dont know if its worth it
@@balamood6183 Totally up to you, turn it into a secondary fuel tank.
How long is the rear shock? Is it 340mm or What is it?
285 or 300mm
@@scooterstreetau does 300mm fit a piaggio zip 2t 2013? And How would the 285 compare to the 300? Is the difference big when riding?
@@ChrizzOG Yes, when fitting a longer shock it lifts the rear and has a direct effect on the steering and handling, more sensitive.