As you can see 10:17 , the power supply is pushed down by the bundle of cables, and when you close the front panel, the bit on the bottom kinks the cable even more. This case need an improvement/better compatibility with modular power supply. I had easier time managing the cables with non modular PSU compared to modular. Maybe you can move the PSU screw holes on the top few mm deeper into the case, since now 2.5 inch drive is no longer needed.
Also, I found that there is actually enough space for the power supply extension cord to be tuck behind the top 90mm fan. This way, you can route the cable on the GPU side so it will be less crowded on the motherboard side.
Got my Midori case early this week and was waiting for few modular cables to arrive. Finally built it last night . I absolutely love the case . I am seriously looking forward to the next version of this case and the possibilities it can officer
I've had my Midori since Feb & while I love the case ... this is by far the most aggravating part of my build. Again I love the case but the case assembly could definitely use an upgrade ... there has got to be an easier way. I was hoping the dark version would have been "Black" instead of the dark blue.
I hope the bottom part is vented,that will increase the airflow inside and make the system cooler. I hope v2.3 implement this and with custom cables with specific lengths for easy cable management😁
I bought this not long ago. I wish you could make a slightly bigger version to fit 2.5 slot gpu/ sfx psu and 280mm gpu length. There really arent much choice for gpu for this case size. I really like how compact and efficient use of space of this case. Really hope midori can make another version that can fit bigger gpu.
I hope you can give another small case with midori design but using Japanese beautiful Hinoki wood and it will be My pleasure to have it. Like Lian Li A3 Front panel, but wood panel..
@@Midori-computer Yes will wait to see that, but I think you don't need to end life this version. So another choice to get your case. Also, I think you need consider design case for SFF GPU
Do you consider to make use of front USB header? Are there plans for it in the future? There`s room for that and it would be a pain to not use it. Would love to have like an USB C and A port at the front or top.
Biggest issue of small volume case for me is not the 37mm cooler, small gpu or the lack of front usb support,it is the flex psu. I can't stand how niche this type of psu and with a similar price sfx psu is still superior
Fans should be installed so that the air is exhausted upwards. Please check the link below. www.reddit.com/r/MidoriPC/comments/1fxdx23/compatible_case_fan_for_midori_5lv2_pc_case/
@@Midori-computer thanks a ton . Really appreciate . My case has landed in Mumbai . Hopefully should have it with me on Monday . Super excited to build in this case
@@Midori-computer Thank you. Also I want to build in this with a NVdia asus 4070 super and a AMD ryzen 7 7800X3D CPU but I am worried about the thermals/temperature of the case being too high. Would a razer kraken elite 240mm aio fit in this case?
@@nimble3492 Could you please check the link below about GPU and CPU cooler? www.reddit.com/r/MidoriPC/comments/1fwj40r/compatible_gpu_geforce_rtx_4000_series_rtx_3000/ www.reddit.com/r/MidoriPC/comments/1fwrojo/compatible_cpu_cooler_for_midori_5lv2_pc_case/
@@Midori-computer Hi my ASUS Dual GeForce 4070 Super EVO OC graphics card is 49.6mm thickness but the case specifications say that the maximum is 43mm would it still fit?
its a bit difficult to get a decent flex atx psu, beside the sound come out from flex atx psu is loud...i wish you have another slightly larger design just enough to use sfx psu. Focus only sfx psu..because there are already many case that support sfx psu, but they also support standard atx, hence in my opinion the case become too big already. And this is Made In Japan, so I believe the quality 😊
@@Midori-computer Hard to get much smaller than Velka 7 / Dan A4-SFX with SFX PSU 😅Maybe consider a version that fits the HDPlex 500 GAN so you can still put a 4070 Ti Super in (I have read the HDPlex 250 can actually do 320W but not sure if that is safe).
I had easier time managing the cables with non modular power supply in this case. There need to be an improvement with the case when using a modular power supply.
■Revision history■ V2.1 Dimensions are adjusted by 1 to 2mm for improving. For example, Max. GPU size is increased from 261mmx43mmx131mm to 261mmx43mmx133mm. V2.2 PSU space and PSU’s cable space is increased. Drive bay is removed. Fitting of Fans and Fan grill (7) is improved.
As you can see 10:17 , the power supply is pushed down by the bundle of cables, and when you close the front panel, the bit on the bottom kinks the cable even more. This case need an improvement/better compatibility with modular power supply. I had easier time managing the cables with non modular PSU compared to modular. Maybe you can move the PSU screw holes on the top few mm deeper into the case, since now 2.5 inch drive is no longer needed.
Also, I found that there is actually enough space for the power supply extension cord to be tuck behind the top 90mm fan. This way, you can route the cable on the GPU side so it will be less crowded on the motherboard side.
Thank you for your advice.
Got my Midori case early this week and was waiting for few modular cables to arrive. Finally built it last night . I absolutely love the case . I am seriously looking forward to the next version of this case and the possibilities it can officer
Thank you for your support.
I hope to continue making and design cases.
I've had my Midori since Feb & while I love the case ... this is by far the most aggravating part of my build. Again I love the case but the case assembly could definitely use an upgrade ... there has got to be an easier way. I was hoping the dark version would have been "Black" instead of the dark blue.
Thank you for your comment.
About assembling, most difficult part is improved at V2.2.
I will consider about color.
White please . I just move to japan and jusy found out about this casee
this looks like a dream come true... perfekt size, ordered it looking forward to build in it
looking forward for the future of this companie
Thank you.
I hope the bottom part is vented,that will increase the airflow inside and make the system cooler. I hope v2.3 implement this and with custom cables with specific lengths for easy cable management😁
@@jensenperalta7927 Thank you for your advice.
I bought this not long ago.
I wish you could make a slightly bigger version to
fit 2.5 slot gpu/ sfx psu and 280mm gpu length.
There really arent much choice for gpu for this case size.
I really like how compact and efficient use of space of this case.
Really hope midori can make another version that can fit bigger gpu.
@@sc9433 Thank you for your advice.
Would love for this also. Just slightly bigger to accommodate a SFX PSU would be amazing.
@@sc9433 Thank you for your advice. We will start to design.
@@Midori-computer please and thank you!
I hope you can give another small case with midori design but using Japanese beautiful Hinoki wood and it will be My pleasure to have it. Like Lian Li A3 Front panel, but wood panel..
Thank you.
We would like to try another design one more time.
@@Midori-computer Yes will wait to see that, but I think you don't need to end life this version. So another choice to get your case. Also, I think you need consider design case for SFF GPU
@@azaharpurwanto4505 Thank you for your advice.
@@Midori-computer What social media platforms do you have in place to keep up with the news?
@@lsolidcloudsl We use the link below. www.reddit.com/r/MidoriPC/new/
If you include psu with custom cable in the box that would be great 🔥
Thank you for your advice.
We will consider it.
Do you consider to make use of front USB header? Are there plans for it in the future? There`s room for that and it would be a pain to not use it. Would love to have like an USB C and A port at the front or top.
@@hawergetzi Thank you for your advice.
We will consider it.
Would we be able to get a soft green color like the Fractal Terra? That would make it an instant purchase from me :)
Thank you for your advice. We will consider it.
since its aluminum you could anodize it to get the color you want. im planning on doing it to get the color similar to the jade terra.
@@user-pb2zf8xx3u thank you for letting me know! I might look into that!
Thank you.
I hope to make many colors in future if I could continue.
Hi. would you happen to have some in stock soon ? I m inlove with your work guys. Keep up the good work!
Thank you.
MIDORI 5L-V2.2 Gray is in stock now.
@Midori-computer awesome! Thanks for the reply. Last question, is the delivery cost taken into account with the price I see on the website?
Made a black version please!! And version 3 for more CPU cooler clearance
Thank you for your opinion.
We will consider it.
Biggest issue of small volume case for me is not the 37mm cooler, small gpu or the lack of front usb support,it is the flex psu. I can't stand how niche this type of psu and with a similar price sfx psu is still superior
Finally. Can i use my old 18.5cm riser for this one?
yes, of course.
いつのまにかバージョンアップしてたんですね。排熱性も高そうで良いですね。
ありがとうございます！放熱性が大幅に改善されました。
how's the temp?
Bro, this case is amazing, is there any chance you'll produce a black variant?
Hi, MIDORI 5L-V2.2 Dark gray will be in stock next year.
Can i use a modular flex atx psu for this one?
Yes, you can use it.
Do you recommend using the top fans on the exhaust or the intake?
Fans should be installed so that the air is exhausted upwards.
Please check the link below.
www.reddit.com/r/MidoriPC/comments/1fxdx23/compatible_case_fan_for_midori_5lv2_pc_case/
Give us some info about your Midori 7,5l case please
@@emptyspace7827
I am sorry but MIDORI 7.5L is out of stock and will not be reproduced.
5:19. . What is that you putting ?
Hi, It is Loctite.
@@Midori-computerdo u suggest this to be used for fan install or it’s optional ?
@@anks0203 It is suggested to use.
@@Midori-computer thanks a ton . Really appreciate . My case has landed in Mumbai . Hopefully should have it with me on Monday . Super excited to build in this case
can this fit inside a backpack or need bigger carryon to fit it?
This can fit in backpack.
when are you restocking?
MIDORI 5L-V2.2 Gray will be in stock next week.
MIDORI 5L-V2.2 Dark gray will be in stock next year.
Are Midori PC cases manufactured in Japan?
About some parts, yes.
But some parts coming from other country.
Hi do you have this in silver color? On the product page it's only showing grey and dark grey.
Hi, the case in this video is gray.
This gray is close to silver.
@@Midori-computer Thank you. Also I want to build in this with a NVdia asus 4070 super and a AMD ryzen 7 7800X3D CPU but I am worried about the thermals/temperature of the case being too high. Would a razer kraken elite 240mm aio fit in this case?
@@nimble3492 Could you please check the link below about GPU and CPU cooler?
www.reddit.com/r/MidoriPC/comments/1fwj40r/compatible_gpu_geforce_rtx_4000_series_rtx_3000/
www.reddit.com/r/MidoriPC/comments/1fwrojo/compatible_cpu_cooler_for_midori_5lv2_pc_case/
@@Midori-computer Hi my ASUS Dual GeForce 4070 Super EVO OC graphics card is 49.6mm thickness but the case specifications say that the maximum is 43mm would it still fit?
@@nimble3492 ASUS Dual GeForce 4070 Super EVO OC graphics card is not compatible.
its a bit difficult to get a decent flex atx psu, beside the sound come out from flex atx psu is loud...i wish you have another slightly larger design just enough to use sfx psu. Focus only sfx psu..because there are already many case that support sfx psu, but they also support standard atx, hence in my opinion the case become too big already.
And this is Made In Japan, so I believe the quality 😊
@@azamshari4565 Thank you for your advice. We will make the case for SFX PSU.
@@Midori-computer Hard to get much smaller than Velka 7 / Dan A4-SFX with SFX PSU 😅Maybe consider a version that fits the HDPlex 500 GAN so you can still put a 4070 Ti Super in (I have read the HDPlex 250 can actually do 320W but not sure if that is safe).
@@ΔαυίδΠριδεαυξ Thank you for your advice.
Does this case have aio support? 240?
I am sorry but this case does not have aio support.
can a 168mm or 170mm flex atx fit?
Yes, 168mm and 170mm flex atx PSU can be applied.
could it works with sfx-l ? did you also get vertical stand support? would be fire ! @Midori-computer
I am sorry but these are not supported.
would it be possible to get a front IO
I am sorry but it is not possible.
@@Midori-computer would it be possible to Mount front IO yourself if you cut out the part to fit the fron io
psuの長さはいくつまでいけますか。
モジュラーは不可と書いてあったので確認したいです。
v2.2でも不可のままでしょうか？
PSU長さは17.1cmまでです。V2.2からはモジュラー電源にも対応しております。
@@Midori-computer
ありがとうございます
v2.2を購入します
🔥🔥
I had easier time managing the cables with non modular power supply in this case. There need to be an improvement with the case when using a modular power supply.
Hello, do you know when order 1153 will ship out?
Hello, it has been shipped today.
@@Midori-computer Thank you
whats changed on v2.2?
■Revision history■
V2.1
Dimensions are adjusted by 1 to 2mm for improving.
For example, Max. GPU size is increased from 261mmx43mmx131mm to 261mmx43mmx133mm.
V2.2
PSU space and PSU’s cable space is increased.
Drive bay is removed.
Fitting of Fans and Fan grill (7) is improved.
Do you want to make a PC or do you want to make a puzzle?🤣
4070 super VENTUS 2Xのやつが入れますか？GPU最大厚さが43mmとサイトに書いてあってこのGPUも43mmです。(´；Д；`)
MSI GeForce RTX 4070 SUPER 12G VENTUS 2X OC is compatible. 入ります。
@ ありがとうございます😊
上のFANはどんなサイズでしか？
120? 140?
@아멜 92mm サイズです。