Building my First CAR - Budget LS Swap Foxbody *PROJECT UPDATE* | New K member + Front Suspension
ฝัง
- เผยแพร่เมื่อ 15 ก.ย. 2024
- This time on SPPTV Clayton and Riley update you on the progress they have made on Riley's 4 eyed Foxbody budget build LS Swap Project!
The front suspension is completed with an unexpected upgrade. Stock parts are restored where possible, and wear items replaced with new parts. The 4l60e transmission is in place and next up is Clayton's favourite, the rear end.
JOIN THE SWEAT PANTS POSSE TODAY! SMASH THAT SUBSCRIBE BUTTON! ALSO make sure to hit the bell to get notified when we go live.
THANKS for watching! Drop a LIKE if you LIKE! Share with your Friends!
Facebook @ SPPTV TH-cam
Instagram @ SPPTVonTH-cam
Snapchat @ SPPTV
PO BOX:
Rob Exner
PO BOX 99900 LX 087 592
RPO GARDEN CITY
WINNIPEG MB R2V 5A2
CANADA
Im getting jealous,👍I can say one things for sure Clayton your meticulousness is definitely showing thru, cars looking great and teaching your son great habits
Car is going to be awesome, Riley has an awesome dad, wish I could have got my dad into cars.
Very nice....keep up the high level of workmanship! Budget builds can still have good build quality.
By far my favorite build series. Great job guys.
This is an awesome series, I can’t wait till my kids get old enough to build something with
Great build, Keep up the great work and videos, Can't wait till Reilly starts her up
Great content
I would put a hidden rev limiter on it,boys will be boys when dads not around,I blew the tires off of everything until I had to start paying for them,lol
Agreed, I was thinking 7k
Lol, nice
fuck man what a good looking clean job in that engine bay
Nice work boys!!!! Looks like a factory Stang with the right power provider! Lol... from one Chevy guy to the next "Clayton", should be a real deal car when finished! Plus the father and son team is always a great thang!
That was one heck of a car-b-que!
Looking good buddy.
FTI makes some nice stuff i have a level 4.5 th400 and convertor but nice nice stuff
Good job both of you guys looks Awesome
OK Riley, let's see your hands in there.
Good job guys!
Nicely done guys ! , just keep Riley away from Mike or this fox will never get done ! lol
What were the part numbers for the power steering pump kit and lines!? Have a manual rack fox gunna go power steering rack and gm pump as well!
Apparently molasses and water work good on rust removal... forget the name of the dude's channel but he does it with everything... probably remember him after I post this.. memory chip is faulty today... anyway.
You are going to put new rotors on the front ?
Or Evapo-Rust those ones
It will be getting a 5 lug conversion before too long so probably won’t go new
Dad has pull at NAPA!!
Using that celebrity status to get the Napa hookup, lol.
Clayton what is that guarge in front of the shifter it looks like a boost vac? ive never seen one like that on the info center....was this car a 4cyl turbo from the factory?
Yeah it’s a GT 4cyl turbo
Looking "Good".
Great vid. I’m also using AJE motor mounts, k member, and Trans cross member. What way do the motor mounts go? I keep having issues and my trans is not clearing. Please help or give some advise.
Angled portion of the mounts go to the back of the car
SweatPantsPosseTV I went to check it out and the angeles portion is facing towards the back. My cross member is about an inch from lining up with the trans mount. Smh.
Weird, with a 4L60 trans?
SweatPantsPosseTV Yes. I’m about an inch or so from the mount lining up with the cross member.
I’m having the same issue with my crossmember. I’m thinking maybe jegs sent the wrong one?
Do you have a name and part # for the Power steering lines?
I am doing the same LS swap into a Mustang.
Thanks so Much!!!
B
The hose kit was p.n. BRG-925102 (confirm threads on your rack and pump)
The adjustable pump pressure kit p.n. is BRG-899001
@@SPPTVarmy learning a lot from people like yourselves, Thank you and Merry Christmas!! From Ontario,Canada
That car would look 100% better on Weld Draglites.
The kids starting to get tapped out! Lol. We’ll get it running first then see what’s left over
You mean this is coming out of his pocket!!!
Come on Dad! You can get a nice used set with tires for like $400 all day.
@@SPPTVarmy Vision, same company that made the wheels Rob installed few months ago, make a "Sport Lite" in both black and polished, prices are fairly good. Didn't check exact sizes available.
What K member is that??? I want to keep my stock front end too and power steering
It’s an AJE
@@SPPTVarmy thank you very much
Do you have a part number
www.summitracing.com/parts/aje-mu40um
What trans did you go with? What oil pan did you end up using? Thanks so much!! I subbed to you're channel and look forward to you're videos
Aye question ! I got do rear main seal & thinking bout the kit that has whole plate & seal or should i just do the seal ?
I’d go with a new seal in your old cover unless the price is really close but make sure you put the seal in the right way or be prepared to strike oil....ask us how we know, lol
Strike oil ! Lmao iam in texas lol
Your right there, change the gasket for the plate also. I have seen more of the plate gaskets leak than rear main seals.
Skim iam thats the kit plate & seal off amazon thanks bro!
1st comment yes
Fucking Dodge!
The kids fox is gonna be better than yours dad!!!
True story