There's an update on building MS flex. You can watch it here: th-cam.com/video/_cZsQTNS83s/w-d-xo.html Ada update dalam membuat MS flexible. Tonton di sini: th-cam.com/video/_cZsQTNS83s/w-d-xo.html
I watched these a while back and after thinking about it, I think this is probably the worst way to go about the simple suspension. You're basically creating and loading the weak point where the car often snaps with this configuration. I think the alternative way is better and just as simple. Instead of cutting off the gear cover from the middle chassis, make the same cut on the bumper instead, then instead of the "U" shaped frp, use the short reinforcing plate. It's basically the same build, but you're not creating the fatal flaw. I'm sure it would have better longevity too.
Thanks for the advice bro, but remember that Mini 4WD is not just about how to make an ideal suspension. Is a lot more complex than that. For me, as long as the car can run well on the track, gives great result, that's enough for me. The main purpose of this channel is giving an idea to other racers, especially new racers. I try to keep everything simple so everyone can do it. It may not be the best, but I guess this simple mechanism is enough. You'll feel it after you run it on the track. Try it bro! 👍
I don't think you're seeing the point, I'm not trying to sound mean, but this method ( imgur.com/a/975bV ) is almost the same as the most common which you've done the tutorial for, just prepared slightly differently, the only differences in parts needed is a couple packs of reinforcing plates to replace the "U" plates, 6x plastic axle bearings and slightly longer alum spacer. Basically, instead of having the whole build front/rear depend on just two little areas of plastic, you isolate the entire wheels/gear assembly instead, maintaining chassis integrity. I hope the pics make it a little clearer what I'm trying to say. It's not about making the ideal suspension, but removing the biggest flaw of the basic build by just changing a couple steps.
Add on facebook? Might be easier. Edit: I sent link on FB, but just incase, here's the pics from my Google drive. drive.google.com/open?id=1ZfgbGkM3kWjMR1UvaidcfSG561zM4uEN
Om mau tanya,saya bikin ms flexible..bisa sih tp kok pas udah pasang gear dinamo dan dinyalain..pas ban saya pegang banya berhenti berputar tp dinamo masih nyala,kaya gear nya kurang padat kurang kena..saya pakai gear ungu dinamo selanjutnya biru dan orange,apa saya salah ukuran gear atau apa ya?mohon penjelasannya om,terima kasih🙏
Saya udah praktekin berhasil bang, tp saya bumperless jd pendek bgt, pas mau masang HG front binggung, jd mepet bgt, rodanya keliatanya nyangkut(blm beli wheel) kira2 nyangkut g bang ma HG carbon depannya klo saya beli wheel medium? Saya pake HG carbon yg 3mm itu lo bang, mohon bantuan dan solusinya
Gan mau tanya nih msh Newbie.. Saya baru mau ngebangun buat Tamiya STO nya.. Bagusan pakek MS Chassis yg biasa kayak di video ini apa yg sdh Reinforced ABS?
Masing-masing bagus sih. Kalo yang reinforced karakteristiknya lebih kaku, kuat. Kalo yang biasa lebih lentur. Kalo saya pribadi, lebih suka yang biasa saja.
Mksh gan atas info dan saran nya .. kayak nya saya juga pakek chassis MS biasa kayak angan, biar enakan buat setting ny.. Oia gan saya mau minta masukan satu lagi, klw buat As Roda Sama Bearing buat di ban bagusan serie yg gimana?
Waaw, udh saya cek gan itu kayak nya Bearing yg paling mahal ya gan hhehe.. 1 Pasang Bearing AO 620 harga nya 80 - 100, bisa dapet AO 520 2 Pasang.. Oia gan buat Bearing AO 620 nya bagusan yg 500 Bintang atau 700 Bintang? Oia gan sekalian saran buat Pelek, ban dan gear nya ? Saya mau ngebangun MS Flexible Part1 kayak di atas, sisa nya nanti ngumpulin uang dlu hhehehe :p (Pengen Ngebangun STO 100)
Ao 520 bukan buat area ban. Itu buat roller. Velg dan ban pilihannya bebas aja. Gak ada yang mutlak terbaik kok. Kalo bingung pilih mana, contoh aja salah satu mobil. Klo saya pakai ban super hard, 24mm, velg carbon.
![【Mini 4WD】I made a T - FL system![Miniyon Cumaster] 【mini4wd】](http://i.ytimg.com/vi/bgy7_do8Brc/mqdefault.jpg)
There's an update on building MS flex. You can watch it here: th-cam.com/video/_cZsQTNS83s/w-d-xo.html
Ada update dalam membuat MS flexible. Tonton di sini: th-cam.com/video/_cZsQTNS83s/w-d-xo.html
Bagus ada after before,mau build tamiya lg hahaha
After before? 🤔
I watched these a while back and after thinking about it, I think this is probably the worst way to go about the simple suspension. You're basically creating and loading the weak point where the car often snaps with this configuration. I think the alternative way is better and just as simple. Instead of cutting off the gear cover from the middle chassis, make the same cut on the bumper instead, then instead of the "U" shaped frp, use the short reinforcing plate. It's basically the same build, but you're not creating the fatal flaw. I'm sure it would have better longevity too.
Thanks for the advice bro, but remember that Mini 4WD is not just about how to make an ideal suspension. Is a lot more complex than that. For me, as long as the car can run well on the track, gives great result, that's enough for me.
The main purpose of this channel is giving an idea to other racers, especially new racers. I try to keep everything simple so everyone can do it. It may not be the best, but I guess this simple mechanism is enough. You'll feel it after you run it on the track. Try it bro! 👍
I don't think you're seeing the point, I'm not trying to sound mean, but this method ( imgur.com/a/975bV ) is almost the same as the most common which you've done the tutorial for, just prepared slightly differently, the only differences in parts needed is a couple packs of reinforcing plates to replace the "U" plates, 6x plastic axle bearings and slightly longer alum spacer. Basically, instead of having the whole build front/rear depend on just two little areas of plastic, you isolate the entire wheels/gear assembly instead, maintaining chassis integrity. I hope the pics make it a little clearer what I'm trying to say. It's not about making the ideal suspension, but removing the biggest flaw of the basic build by just changing a couple steps.
The link can't be opened bro. Any other link? I'm curious about it
Add on facebook? Might be easier.
Edit: I sent link on FB, but just incase, here's the pics from my Google drive. drive.google.com/open?id=1ZfgbGkM3kWjMR1UvaidcfSG561zM4uEN
a very usefull tutorial, for a total noob like me 👍👍👍
Don't forget to watch this one. The latest update of my MS: th-cam.com/video/_cZsQTNS83s/w-d-xo.html
Itu tail unit dan nose unit, dapatnya dari mana ?? Dan apa bedanya dengan yg sebelum di potong ??
dapat dari toko. bedanya kalo udah dipotong, ada bagian yang terpotong.
Om mau tanya,saya bikin ms flexible..bisa sih tp kok pas udah pasang gear dinamo dan dinyalain..pas ban saya pegang banya berhenti berputar tp dinamo masih nyala,kaya gear nya kurang padat kurang kena..saya pakai gear ungu dinamo selanjutnya biru dan orange,apa saya salah ukuran gear atau apa ya?mohon penjelasannya om,terima kasih🙏
Mgkn gearnya rusak
Mantap gan
Is that MS or MSL???
MSL
om .video #1, #2, #3 ini berlaku buat semua tipe MS? nose & tail unit yg berbeda?
Kalo hanya beda warna chassis, iya.
Saya udah praktekin berhasil bang, tp saya bumperless jd pendek bgt, pas mau masang HG front binggung, jd mepet bgt, rodanya keliatanya nyangkut(blm beli wheel) kira2 nyangkut g bang ma HG carbon depannya klo saya beli wheel medium? Saya pake HG carbon yg 3mm itu lo bang, mohon bantuan dan solusinya
Tergantung tipe carbon, ukuran ban, roller yg dipakai
Ijin tanya gan bingung ni 😅, chassis MS-L sama gak ya sama chassis MS, rencana mau beli kit buat coba2 rakit MS Flex, trims
MS-L (Light) lebih ringan dari MS
Om mau tanya, kalo ms flex dan ms inner suspensi better yang mana ya? Soalnya cara potong nya beda om.
CMIIW
Flex = inner suspensi. Nama sesungguhnya MS flexible. Tipenya memang macam2
Hati2 main cutter..sy lihat tangan abg ada handyplast..hahaha
Demikian adanya 🤣
Gan mau tanya nih msh Newbie..
Saya baru mau ngebangun buat Tamiya STO nya.. Bagusan pakek MS Chassis yg biasa kayak di video ini apa yg sdh Reinforced ABS?
Masing-masing bagus sih. Kalo yang reinforced karakteristiknya lebih kaku, kuat. Kalo yang biasa lebih lentur. Kalo saya pribadi, lebih suka yang biasa saja.
Mksh gan atas info dan saran nya .. kayak nya saya juga pakek chassis MS biasa kayak angan, biar enakan buat setting ny.. Oia gan saya mau minta masukan satu lagi, klw buat As Roda Sama Bearing buat di ban bagusan serie yg gimana?
As roda, kalo saya pakai yang 72mm warna hitam. Untuk bearing pakai bearing AO 620.
Waaw, udh saya cek gan itu kayak nya Bearing yg paling mahal ya gan hhehe..
1 Pasang Bearing AO 620 harga nya 80 - 100, bisa dapet AO 520 2 Pasang..
Oia gan buat Bearing AO 620 nya bagusan yg 500 Bintang atau 700 Bintang?
Oia gan sekalian saran buat Pelek, ban dan gear nya ?
Saya mau ngebangun MS Flexible Part1 kayak di atas, sisa nya nanti ngumpulin uang dlu hhehehe :p (Pengen Ngebangun STO 100)
Ao 520 bukan buat area ban. Itu buat roller. Velg dan ban pilihannya bebas aja. Gak ada yang mutlak terbaik kok. Kalo bingung pilih mana, contoh aja salah satu mobil. Klo saya pakai ban super hard, 24mm, velg carbon.
Part number cassis yg gitu brapa gan
Gak hapal gan. Googling aja MS chassis gan.
bang ada list materialnya ga?
List nya nggak ada. Di video sudah dijelaskan parts yang digunakan gan.
Part ke 2 di tunggu ya bang???
+de zaero coming soon broh!
alat buat motong namanya apa gan
Gergaji? Gerinda?
alat yg warna nya biru gan
Nipper/side cutter/tang potong
makkasihh gan, pngen tanya2 enk nya di yutub wa atw ig gan?
Roscoe Channel gerinda nya beli kah bg? Atau bikin sendiri
Sebelom potong jari tangan mulus, setelah potong nongol plester di telunjuk, kog saya mau belajar potong memotong jadi serem yaaa 😅
Kecelakaan. Nggak ada noda yang nggak belajar. 😅
@@roscoechannel 😂😂😂😂😂
Sekalian mau nanya, itu bagian nose & tail emang bumperless atau dipotong sendiri?
Potong sndiri dong
Hi sa mga naglalaro sa The Brickyard by Lil's Hobby Center :)
Hello 😊
B
Dasarny g ad yg beda tuh, sama sama hijau hmm :v
+Muhammad Rifandi 🤣 lupa alasnya hijau, chassisnya juga hijau.