HAVE YOU CHANGED THE SETTINGS...IF I HAVE A LOT OF CLOTHES....I HAVE IT ON BULK ITEMS ON ONE SIDE,,,(LEFT) AND THE FAR RIGHT I HAVE IT HEAVY DUTY.....NOW AFTER YOU DO THOSE SETTING....BEFORE IT PRESS & HOLD START GO DOWN TO (TEMP)....MAKE SURE YOU HAVE IT ON HIGH .....TO CHECL THE Temperature.....IF IT IS STILL BLOWING COOL...EITHER YOUR CORD IS WRONG OR THERE IS A DEFECT IN YOUR DRYER.....I TH-camD MY DRYER AFTER I GOT IT.....I AM VERY PLEASED WITH IT.....
Hey Scott - I have this dryer and my question is in relation to the steam setting. Instead of shooting a mist of water (as I would expect), this dryer shoots a jet of water directly at the dryer door and then water starts to leak out of the machine and onto the floor. The only way to prevent this is if I have a load that is large enough (bed sheets for example) to block the jet of water from hitting the front door. Did you notice the same? I am thinking my dryer may need a replacement steam valve assembly.
Hey Scott I have this same unit and when I turn on the dryer it seems to get stuck sensing... It doesnt do anything past that. I entered diagnostic mode and it shows no faults. Any ideas?
My new dryer like this one will not dry my clothes completely. What am I doing wrong? I turned the ecoboost off but it seems to keep on coming back. Please help.
I have the same dryer and just got it a couple of weeks ago. I keep getting that message of "Check Vent" but it's all clear. Is that normal or is there something wrong? Also I've noticed that it will keep drying even if the clothes are dry it won't turn off. Any tips??
It is really fussy about the vent, a little too particular in my opinion. I ended up changing out the flexible plastic vent for a smooth solid flexible metal one that seemed to cure the problem, I will still get a check bent occasionally but not often. I don't have any problem with it continuing to run after the clothes are dry, you can adjust the dryness level
@@waniavarnado1248 My dryer is working well Thank You.......If its your Dryer that isn't working the wire maybe to hooked up backwards or you may not have a heavy enough Cord
all I can say is that you push the power button the push the start button for 3 seconds, beyond that maybe unplug and re-plug the dryer??? then call the repairman
These have to be the Biggest piece of Crap that Whirlpool ever made what In the Hell was the Engineers thinking they must have the minds of a 3 year old . Stay away from the new Whirlpool Washers and Dryers they are the most ridiculous machines to operate. Whirlpool took something that was very practical and easy to operate and turned it into just garbage. Stay away from these Whirlpool Washers and Dryers trust me we have them Do not buy them run as fast as you can away from them. We have always loved Whirlpool but not anymore.
@@scottsolfermoser8093 i did that still not working. i first trun on the power button it came on then i press the start button that is when it powderd off and not working at all. it is only 6 mouths old new from lowes..
Same for me I'm thinking vent problems have added up to the thermal fuse issue. Not a professional, just trying to problem solve for my own appliance before we call the repair guy. Has anyone had this issue resolved?
Great...how do you set the clock?
Do you have to set the time and date on this whirlpool dryer?
HAVE YOU CHANGED THE SETTINGS...IF I HAVE A LOT OF CLOTHES....I HAVE IT ON BULK ITEMS ON ONE SIDE,,,(LEFT) AND THE FAR RIGHT I HAVE IT HEAVY DUTY.....NOW AFTER YOU DO THOSE SETTING....BEFORE IT PRESS & HOLD START GO DOWN TO (TEMP)....MAKE SURE YOU HAVE IT ON HIGH .....TO CHECL THE Temperature.....IF IT IS STILL BLOWING COOL...EITHER YOUR CORD IS WRONG OR THERE IS A DEFECT IN YOUR DRYER.....I TH-camD MY DRYER AFTER I GOT IT.....I AM VERY PLEASED WITH IT.....
Can I please ask a question. I have the very same machine. It will not dry. It turns on 3 sec then. Constantly pauses. Any tips.
having same issue, unable to get any help
Same problem 😢 it’s not working and I just got it today
Were yall able to fix that problem? I know its been a year but I’ve had mine for 2 and now have this problem
i bought this same brand and model 2 days ago. it won't heat.
Nice looking, but I agree with your review. Don’t you wonder what the thinking was behind the designers?
Hey Scott - I have this dryer and my question is in relation to the steam setting. Instead of shooting a mist of water (as I would expect), this dryer shoots a jet of water directly at the dryer door and then water starts to leak out of the machine and onto the floor. The only way to prevent this is if I have a load that is large enough (bed sheets for example) to block the jet of water from hitting the front door. Did you notice the same? I am thinking my dryer may need a replacement steam valve assembly.
no I haven't noticed anything like that
Thank you this helped
I have this same model and I need to replace the heating element. How do I get the front off to get to the heating element?
Sorry no idea
I found ifyou use a damp paper towel to clean the dryer vent, makes it much easier
it is not the cleaning that is the problem, it is the design that takes two hands to hold open to clean
@@scottsolfermoser8093 my Samsung dryer is the same way, its hard to open and its annoying as heck.
How do you get dryer in pairing mode. I downloaded app and clicked on remote enable on dryer. But not working
Hey Scott I have this same unit and when I turn on the dryer it seems to get stuck sensing... It doesnt do anything past that. I entered diagnostic mode and it shows no faults. Any ideas?
contact Whirlpool
Id give this a 1 out of 5. I cant get through a complete dryer load with out the steam sensor shutting it off. Leaving the clothes damp.
haven't had that type of problem with mine, you might want to contact the manufacturer
My new dryer like this one will not dry my clothes completely. What am I doing wrong? I turned the ecoboost off but it seems to keep on coming back. Please help.
I would contact whirlpool
There is a check Vent. Clean lint....appearing. we have cleaned the vent both sections. Can we clear off that message?
I have the same problem it is over sensitive, I mostly cured it by running hard pipe to the vent all the way outside
I have the same dryer and just got it a couple of weeks ago. I keep getting that message of "Check Vent" but it's all clear. Is that normal or is there something wrong? Also I've noticed that it will keep drying even if the clothes are dry it won't turn off. Any tips??
It is really fussy about the vent, a little too particular in my opinion. I ended up changing out the flexible plastic vent for a smooth solid flexible metal one that seemed to cure the problem, I will still get a check bent occasionally but not often. I don't have any problem with it continuing to run after the clothes are dry, you can adjust the dryness level
High maybe you have the wrinkle control set to ON?
Wrinkle,control,will keep turning the machine off and in until you unload the dryer.
Thank You....Can you show me the back & how you have the Cord hooked up Please....
sorry not really, too hard to get to the back of it
Thanks! He got It.....Loving It!
@@patricialewis4017 got same dryer how is it connected in the back? It will turn on but will not get hot.
@@waniavarnado1248 My dryer is working well Thank You.......If its your Dryer that isn't working the wire maybe to hooked up backwards
or you may not have a heavy enough Cord
@@patricialewis4017 please give me details.
My big question is
how well it dries cloths.
damped or thoroughly?
i heard that the GE brands wont dry cloths that well
works great, but can adjust the drying amount
Can't turn the dryer on
all I can say is that you push the power button the push the start button for 3 seconds, beyond that maybe unplug and re-plug the dryer??? then call the repairman
Brand new moved it to a new place and it is not heating
probably should call the manufacturer
These have to be the Biggest piece of Crap that Whirlpool ever made what In the Hell was the Engineers thinking they must have the minds of a 3 year old . Stay away from the new Whirlpool Washers and Dryers they are the most ridiculous machines to operate. Whirlpool took something that was very practical and easy to operate and turned it into just garbage. Stay away from these Whirlpool Washers and Dryers trust me we have them Do not buy them run as fast as you can away from them. We have always loved Whirlpool but not anymore.
if your electic dryer does not turn on try checking your house fues box.
Fist time my dryer stopped I tried the house fuse box the second time which is now it’s not coming on🤦🏽♀️ my dryer brand new only had it 8mnths
@@ashleyfayne5408 so sorry to hear that you need to call whirlpool today you should be still under warrenty
Hi my dryer ended up coming back on by itself not sure what was wrong but it’s working fine now
@@ashleyfayne5408 that is Great i am so happy it is working now .
Puede traducir en español xfavor
no
will not turn on only 6 mouths old.
try unplugging it
@@scottsolfermoser8093 i did that still not working. i first trun on the power button it came on then i press the start button that is when it powderd off and not working at all. it is only 6 mouths old new from lowes..
Sounds like it is time to contact whirlpool
Same here mine won’t come back on had it maybe 8months
Same for me I'm thinking vent problems have added up to the thermal fuse issue. Not a professional, just trying to problem solve for my own appliance before we call the repair guy. Has anyone had this issue resolved?