Nice and best way to teach. Initially i thought some gora is making this demo until I heard the very familiar voice in the background saying "choriyan taiz karwa lo, kenchiyan taiz karwa lo, pressure cocker diyan washran pwa lo" 😅😅😅
Taping the ferrule to the same diameter of the tip your going to fit just so your can centre it perfectly is a waste of time, just get a tip which is bigger than your ferrule and glue it on. Your cutting the excess of anyway so it’s in line with the ferrule and then shape it how you like. It’s irrelevant if the tip is perfectly centred or not. Also sand the tip from the centre outwards - don’t go to and fro across it you’ll just pull the fibres apart
I commented on this video a while ago saying it was a waste of time taping around the ferrule just to centre the tip……….however knowing this trick really came in handy whilst tipping a friends cue yesterday l. Ferrule was 10.2mm and the Century pro tip only measured 10.3mm - I could never have centred it by hand with soo little margin for error. This method saved me from messing up a £5 tip. Thankyou for your video 👍👍👍
@@ewanthug91 You may well not have but whoever made this video can be seen sanding the ferrule at the 5 min mark, watch the video. This looks like the first tip change (cue and tip look brand new) but after half a dozen or so the ferrule may start rounding off.
Never shape a tip like this. Scrubbing the sandpaper across the tip like this will tare the fibres of the tip. Always do downward strokes when shaping tip
I use gorilla glue adhesive instead of superglue gel. Means youve got to wait 24 hours but i get a much more consistent play compared to super glue gel. Maybe you should give it a try!
It was very, very dangerous the way you removed the tip from the cue. You're supposed to lay the cue flat on a table and then cut the old tip out carefully !!!
Decent job until you went to shape the tip. Never ever shape a tip like that, by dragging the sandpaper or shaper back and forth across the tip. You will loosen the fibers on the tip and damage it. This can ruin the entire tip, but it will certainly at the very least damage it and shorten its playing time.
with all those accessories i still believe that's not a good replacement. just because it has more height i mean the tip wont be comfortable for shots...
Nice and best way to teach. Initially i thought some gora is making this demo until I heard the very familiar voice in the background saying "choriyan taiz karwa lo, kenchiyan taiz karwa lo, pressure cocker diyan washran pwa lo" 😅😅😅
Taping the ferrule to the same diameter of the tip your going to fit just so your can centre it perfectly is a waste of time, just get a tip which is bigger than your ferrule and glue it on. Your cutting the excess of anyway so it’s in line with the ferrule and then shape it how you like. It’s irrelevant if the tip is perfectly centred or not.
Also sand the tip from the centre outwards - don’t go to and fro across it you’ll just pull the fibres apart
I commented on this video a while ago saying it was a waste of time taping around the ferrule just to centre the tip……….however knowing this trick really came in handy whilst tipping a friends cue yesterday l. Ferrule was 10.2mm and the Century pro tip only measured 10.3mm - I could never have centred it by hand with soo little margin for error.
This method saved me from messing up a £5 tip.
Thankyou for your video 👍👍👍
Absolutely spot on comment, I couldn’t agree more!
The ferrule is machined flat. Use a blade to get any residual tip and glue off, never sand it.
yup. i never sand it. just use blade to cut off the old glue
@@ewanthug91 You may well not have but whoever made this video can be seen sanding the ferrule at the 5 min mark, watch the video.
This looks like the first tip change (cue and tip look brand new) but after half a dozen or so the ferrule may start rounding off.
@@D.P.G barry stark does mention about this ferrule thing, he said like u just said.. its machined flat dont mess with it..
Never shape a tip like this. Scrubbing the sandpaper across the tip like this will tare the fibres of the tip. Always do downward strokes when shaping tip
Great video thanks for sharing. Which tip shaper are you using I am looking for one like this, if you don't mind sharing?
Thank you for this video! I struggled a little but this is a good idea!
Parabéns que marca é essa sola... Parece ser muito boa...
I am from Lahore tell me where we buy tip clamp in reasonable price or which one is better plastic or wood
Have you tried the Bondic uv glue ?
I always use bison glue
Great video, do you know where I could get a tool like the one you use to trim the tip down?
I make it myself. You can too its easy
How you make this tool bro ? Omg
You got blue stains on the ash?
Sir nice tricks to re tip.which brand tip is it?
SIR I WANT TO.BUY MY OWN CUE AND I'M BEGINNER FROM PAKISTAN WILL YOU PLEASE TELL ME THE PLACE FROM WHERE I SHOULD GET AND THE PRICE PLEASE
where can you get this tip shaper
From where did you get this tip clamp (Silver one)
Bro if u got answer please tell me
I need tip clamp and tip shaper
@@osamaiqbal2598 eBay
I need shaper..how much
I use gorilla glue adhesive instead of superglue gel. Means youve got to wait 24 hours but i get a much more consistent play compared to super glue gel. Maybe you should give it a try!
bhai kis jag hy
You'll end up with the tip uneven , scrubbing with sandpaper isn't a good idea.
Where did you get this cue from?
What is the purpose of the scotch tape ?
Which sand paper is best that can be used in tip shaper, fine or thick sand paper ?
220 no
Amazing job
Tape on tip is great idea...
smart way to glue the tip
Zhanhong Liu Thanks
Ye shaper milskta ha ??
Can any one tell which cue tip is cheap and better
what if i don't press the tip?
It was very, very dangerous the way you removed the tip from the cue.
You're supposed to lay the cue flat on a table and then cut the old tip out carefully !!!
Show, parabéns!
with a normal snooker cue, the ferrule is flat with the wood of the cue...
Great video.Thanks for posting.
where did you get your tip shaper
I made it by myself
cues 2 use
plz tell how you made your tip shaper
You could make by cutting a pvc pipe in half and pasting sand paper(fine grain) in the inside
@@FarhanEjazfpfu the tip shape is crap pal. 😢
sui gas da chuly v thk kra lo
Awesome video
Put the cue on a flat surface and cut downward other wise expect to have a few stitches. Ffs
8:24
y did u waste a perfect tip, could've shown us a tutorial with a worn off or a broken tip instead
Probably didn’t like it so replaced it
very nice
Thankyou ❤
You don’t put tape
Why not?
10.07.. hear the sound..👉. pressure cooker theek krwa lo😂😂
Pointless centering the tip its bigger than the ferrule...
Meri cue per tip laga do gey aap?
Nice bro
Thanks you so much ❤️ brother
Omin cue tip. Just like mine
Decent job until you went to shape the tip. Never ever shape a tip like that, by dragging the sandpaper or shaper back and forth across the tip. You will loosen the fibers on the tip and damage it. This can ruin the entire tip, but it will certainly at the very least damage it and shorten its playing time.
Because of the person outside, I now know that you're from Pakistan 😂😂😂
😂😂😂
Very nice video though! ❤
@@lehrasibalinasir Thanks bro 😊❤️
Perfect.
Pressure cooker theek karwa lo
Not the way to do it over time you'll ruin ur ferrule
Sui gas de chiulle thk kra lo cue dia tip lawa lo
LIKE
with all those accessories i still believe that's not a good replacement. just because it has more height i mean the tip wont be comfortable for shots...