For the motor, the first element must be the contactor, which contains the N.O. Auxiliary contact; then follows the thermal element called the overload relay which contains the current adjustment knob to trip the thermal overload relay to the motor.
Excellent, thank you, i have a PLC Control Board FX3U-14MR, but i don't have any software to program it, can you please help me to have the software for that PLC. thanks
X2 is a feedback from the contactor; once it's running the Normally Open contact from Contactor closes and is a Closed contact. (therefore changing X2 from 0 to 1)
Very simple and detailed. Thank you.
Sir you have explained very nice
Good video for PLC but what's the usage of interlock on or off the motor _trip, please?
For the motor, the first element must be the contactor, which contains the N.O. Auxiliary contact; then follows the thermal element called the overload relay which contains the current adjustment knob to trip the thermal overload relay to the motor.
You can place a motor circuit breaker UPSTREAM of the contactor. 😏
what app u use for the curvuit
Excellent, thank you,
i have a PLC Control Board FX3U-14MR,
but i don't have any software to program it, can you please help me to have
the software for that PLC. thanks
Very excellent
Thanks Sir 👍
loved it❣
What is the name of the software used for the simulation?
Blender 3.1
Thank you
And why not enter X2 instead of Y3?
how X2 turn on ? While we are not providing the signal to turn on x2
X2 is a feedback from the contactor; once it's running the Normally Open contact from Contactor closes and is a Closed contact. (therefore changing X2 from 0 to 1)
👍👍
Show 👍👍👍👍