For what you paid it should not have many of those issues! Especially the losing material.. Me personally I would return it to them and find something better
Swap the wingnuts with quick release locking pins. Move the spray bar up so you have room to reach up in there, add a spray hole to wash the last of the tailings out instead of them just sticking and going round and round. I dont know about having the sluice also a rocker box, but I agree if its gonna toss paydirt out the side that's a big L.
Looks like it would sit over the the tub to catch the water, rubber door sweeps for feed angle adj., and a sluice under to catch spillage, oh and slots for mat adj., lastly heat for a pvc pipe trowel with endcap to clean nugget trap.
Great video Jack all in all with some tweaks not to bad of a machine I personally would love one someday....Hey your pecan recipe was fricken awesome 😂😂😂 I measured exactly like you did thanks for the tip
Just loosen the pipe union on the spray bar and adjust the bar until it the spray is more centered, then tighten the union of course. You can also turn the spray bar with a pipe wrench a little to the right or left to get the water pointing correctly.
Yea that nugget catcher should be like a bed frame joint with big eyelets that let you remove the rim with a small twist to get the nuggets.pete sake it's another fab glam shoddy prod!😂⚔️🏴☠️
I Love Torque Screws Looks Like a T-7 or T-8 Bit... Stars LOL... Love That New Red Gold Toy...Need a Flat Oil Pan for it to Sit on for that Material Lost... 👍🏻🤠🇺🇸
Apparently I watached this once before. I would like to say recently I have been thinking about one of these but thanks to your review and video I won't be buying one of these. I have the little trommel on top of a gold cube and hence my comments on silicon on the elec motor. My original motor rusted up immediately but they sent me a new one that already had silicone on it. I like your pro's and con's reviews on equipment.
The trommels on the cube are gold fox and that’s a good Trommel. The gold claimer has a larger one that is good. But this smaller one was never tested before selling them. I have talked to the manufacturer and was going to send me out some repairs but never did. They even raised their prices. I just hope they fixed their problems. Thanks
All the more, it is good to buy one of these so you can back engineer it and you have it as a basic model to see what can be added on and keep all the gadgets on it that work well.
Hook the extension to the red bar UNDER the moving tray... that is as wide as it moves back n forth that doesn't move but covers the width. And did the welds fail at the top of ur feed area where its rattling. That thing sure has room to make it how u want and need it cus it needs a bunch of little tweaks
Jack the company should get with the prospector that was the equipment before manufacturing a unit for the general public. Where is there R&D. Some of the issues that you pointed out is just poor workmanship. You have some great ideals on the the modification and some issues. Keep up the good work may some day we will meet in the feild.
wow , what a interesting little machine , folding up a thin piece of aluminium shouldnt be too hard to build an extension on the sluice , longer you make make the sluice the better the capture , i personally would go with dream mat or miners moss in the sluice and the deep vee matting in an extension so can see anything that is travelling down past the front mat easily. drill a second hole through the walls at the bottom of the sluice run to double bolt an extension on so it is sturdy . i think a small spray bar at the top / front end of the hopper would be better for water to send the dirt through
There is a smaller 10in Javelina for same $1500. Seems like an endorsement for that version! Nice comparison and would love to see if it catches the fine gold missed by dry washers as well.
Great review, thank you. I'd like to hear your opinion of the Dream Mat compared to the other products you have there. I exclusively use Dream Mat in my concentrates sluice and I'm happy with the resulys but I've never tried anything else. I have hundreds of tonnes of dryblower tailings that I'd like to put through a wet plant but like you I'm in the desert.
Awesome look at it, like to see a vid on the Javelina now too. I would be pretty disappointed. Watching it work was a bit sad, with water and material everywhere. Why not a moving guide for the material? or just a proper shoot to distribute it on sluice, having it oscilate was just the worst visually. Now, we all know gold is heavy, so like a rocker box does the stuff that sloshed out matter? My answer, for $1,500 is YES! Cheers guys
You got gold that the drywasher missed - but how much would you have to drywash and carry the tailings home to pay for either model? Maybe if you were working in a river or near a river where you could pump water to it.... What do you think?
Ha ha ha maybe they were thinking they were building a deck for you as well ha ha ha. Also remove bar that says your sluice so that it stays into place and limits water and material loss.
What are the end results? Did you send this unit back to Apache Junction Arizona or did you drive it over to the guy? I’ve been pissed for what you paid for it. No Flippin way. Would I have taken that thing and you’re talking about modifying it you didn’t buy another job did youJesus, you shouldn’t even have to worry about anything for what he charges for the stupid things. I think I would call Gold Fox up and have them make you a bigger one. I’m sure Kelly could do that.
im sure it wasnt cheap , anf d for the amount of flaws (bearing on trap area) -- and actually losing material before it even processed .. wow .. that sucks .. your not supposed to have to 'join the design team' to fix problems .. this is one of those companies that yells 'shipp it ' all day long .. and corners are cut to get it out the door rush job style .. obviously not much testing .. how can u ship a machine that actually dumps material out on the ground before it even hits the sluice ???!?!??!
Well well well moneybags rides again! Look at that humdinger! That baby will move material . Now I know 3 or 4 grams mailed to Tacna Arizona is a drip in the bucket! After all it’s better to giveth then to taketh! Ole pal! Ole friends o mine!
Looks like some poor engineering or bad manufacturing. Did they ever message you about the video? You should not have to touch it send it back. I know i wont be buying one of those. paying all that money to modify it like that is terrible.
I really like that thing when you got it out of the box but after all the problems with it now go elsewhere I’m not buying one of those no way I don’t trust the company either they let that one go out the door especially to you knowing that you do tubes, that’s some shitty advertisingif that was my company, I would be devastated and have to fire the employee that put that in the mailbox and sent that thing to you. Shame on them poor quality, poor workmanship, poor everything specially poor you.
one thing you better silicone every mating crack on the windshield motor. water will get into that motor if not done and totally screw it up.
That was an honest evaluation Jack..... you'd never make it as a used car salesman
I love star bits. They don't strip as easy as other screw designs. Torq screws are way better.
For what you paid it should not have many of those issues! Especially the losing material.. Me personally I would return it to them and find something better
Swap the wingnuts with quick release locking pins. Move the spray bar up so you have room to reach up in there, add a spray hole to wash the last of the tailings out instead of them just sticking and going round and round. I dont know about having the sluice also a rocker box, but I agree if its gonna toss paydirt out the side that's a big L.
Looks like it would sit over the the tub to catch the water, rubber door sweeps for feed angle adj., and a sluice under to catch spillage, oh and slots for mat adj., lastly heat for a pvc pipe trowel with endcap to clean nugget trap.
Great video Jack all in all with some tweaks not to bad of a machine I personally would love one someday....Hey your pecan recipe was fricken awesome 😂😂😂 I measured exactly like you did thanks for the tip
Just loosen the pipe union on the spray bar and adjust the bar until it the spray is more centered, then tighten the union of course. You can also turn the spray bar with a pipe wrench a little to the right or left to get the water pointing correctly.
Yea that nugget catcher should be like a bed frame joint with big eyelets that let you remove the rim with a small twist to get the nuggets.pete sake it's another fab glam shoddy prod!😂⚔️🏴☠️
I Love Torque Screws Looks Like a T-7 or T-8 Bit... Stars LOL... Love That New Red Gold Toy...Need a Flat Oil Pan for it to Sit on for that Material Lost... 👍🏻🤠🇺🇸
Apparently I watached this once before. I would like to say recently I have been thinking about one of these but thanks to your review and video I won't be buying one of these. I have the little trommel on top of a gold cube and hence my comments on silicon on the elec motor. My original motor rusted up immediately but they sent me a new one that already had silicone on it. I like your pro's and con's reviews on equipment.
The trommels on the cube are gold fox and that’s a good Trommel.
The gold claimer has a larger one that is good. But this smaller one was never tested before selling them.
I have talked to the manufacturer and was going to send me out some repairs but never did. They even raised their prices. I just hope they fixed their problems.
Thanks
All the more, it is good to buy one of these so you can back engineer it and you have it as a basic model to see what can be added on and keep all the gadgets on it that work well.
Maybe they should field test their trommel and fix all the defects.
Great stuff brother! Looks like its a machine with potential...with some modz.
Hook the extension to the red bar UNDER the moving tray... that is as wide as it moves back n forth that doesn't move but covers the width. And did the welds fail at the top of ur feed area where its rattling. That thing sure has room to make it how u want and need it cus it needs a bunch of little tweaks
Good idea. Just welds not to good. Thanks for the input and thanks for watching
i would love to have the Javelina :)
Jack the company should get with the prospector that was the equipment before manufacturing a unit for the general public. Where is there R&D. Some of the issues that you pointed out is just poor workmanship. You have some great ideals on the the modification and some issues. Keep up the good work may some day we will meet in the feild.
wow , what a interesting little machine , folding up a thin piece of aluminium shouldnt be too hard to build an extension on the sluice , longer you make make the sluice the better the capture , i personally would go with dream mat or miners moss in the sluice and the deep vee matting in an extension so can see anything that is travelling down past the front mat easily. drill a second hole through the walls at the bottom of the sluice run to double bolt an extension on so it is sturdy . i think a small spray bar at the top / front end of the hopper would be better for water to send the dirt through
Thanks for all that. Great ideas!
There is a smaller 10in Javelina for same $1500. Seems like an endorsement for that version! Nice comparison and would love to see if it catches the fine gold missed by dry washers as well.
I used the 10” years ago. I’m sure they have made improvements over time. The 12” works nice. But this small gold claimer needs work!
Thanks!
wow $1,500 they could have put it together better fam & they gave you the run around. keep up the great work fam. GOLD SQUAD OUT!!!
Great review, thank you. I'd like to hear your opinion of the Dream Mat compared to the other products you have there. I exclusively use Dream Mat in my concentrates sluice and I'm happy with the resulys but I've never tried anything else. I have hundreds of tonnes of dryblower tailings that I'd like to put through a wet plant but like you I'm in the desert.
If the mat works for you then I wouldn’t change.
It’s all about testing.
Awesome look at it, like to see a vid on the Javelina now too. I would be pretty disappointed. Watching it work was a bit sad, with water and material everywhere. Why not a moving guide for the material? or just a proper shoot to distribute it on sluice, having it oscilate was just the worst visually. Now, we all know gold is heavy, so like a rocker box does the stuff that sloshed out matter? My answer, for $1,500 is YES! Cheers guys
Time to do some modifying.
You got gold that the drywasher missed - but how much would you have to drywash and carry the tailings home to pay for either model? Maybe if you were working in a river or near a river where you could pump water to it.... What do you think?
You are right. Here in Arizona we dont have water. So we have to work harder. Lol
Ha ha ha maybe they were thinking they were building a deck for you as well ha ha ha. Also remove bar that says your sluice so that it stays into place and limits water and material loss.
I agree with the screws, the new ones do not strip our as easy
Shame it had so many flaws in the machine, especially the water and cons loss on the floor...
That's a nice machine thanks for sharing
Gee,I wonder if I could make my own with an old cement mixer for less than half the price of what you paid for that thing
check out some of allans vids th-cam.com/video/JJgnfHAJBDw/w-d-xo.html
Umm Phillips bits are a thing of the past. If you strip a torx bit head,, just put the drill down lol. Nice trommel
Its os beautiful tromel
Hello. Here, my uncle is great 👍👍
I like it
Yes not sure the value is in it. Too many flaws that should be addressed. Thanks for sharing 👍🏽 but I think my gold fox is a better unit.
Did you make that?
No! Gold Claimer does
I guess the big question is how do you get Lisa to load the dirt into this machine.????? HA.....
What are the end results? Did you send this unit back to Apache Junction Arizona or did you drive it over to the guy? I’ve been pissed for what you paid for it. No Flippin way. Would I have taken that thing and you’re talking about modifying it you didn’t buy another job did youJesus, you shouldn’t even have to worry about anything for what he charges for the stupid things. I think I would call Gold Fox up and have them make you a bigger one. I’m sure Kelly could do that.
I think they’re in California. He did nothing for me.
Very awesome!
im sure it wasnt cheap , anf d for the amount of flaws (bearing on trap area) -- and actually losing material before it even processed .. wow .. that sucks .. your not supposed to have to 'join the design team' to fix problems .. this is one of those companies that yells 'shipp it ' all day long .. and corners are cut to get it out the door rush job style .. obviously not much testing .. how can u ship a machine that actually dumps material out on the ground before it even hits the sluice ???!?!??!
yeah i have had problems with ups ... broken things on arrival there and so forth ... worth a few extra to ge with fed ex !
Yep, return to sender. far too many dramas. imo 👍
Well well well moneybags rides again! Look at that humdinger! That baby will move material . Now I know 3 or 4 grams mailed to Tacna Arizona is a drip in the bucket! After all it’s better to giveth then to taketh! Ole pal! Ole friends o mine!
i can tell you held back on that review, you really dont want to know what i think about it, give it to your grand son to play with in his sand box.
I think if they knew you'd bite the head off a rabbit if it crapped in your yard you'd have gotten that tommel faster.
One ounce and it pays for its self!
what brand is it
Gold Claimer
@@GoldFeverAdventures there big unit works well with the sand screw
@@jeffmcauliff5315 yes they do. I used to have one. I did have a muck problem trying to recirculate. Wished I would of kept it.
Hmmmmmm following....
To much waist on floor😅
Looks like some poor engineering or bad manufacturing. Did they ever message you about the video? You should not have to touch it send it back. I know i wont be buying one of those. paying all that money to modify it like that is terrible.
Never responded back to me!
I really like that thing when you got it out of the box but after all the problems with it now go elsewhere I’m not buying one of those no way I don’t trust the company either they let that one go out the door especially to you knowing that you do tubes, that’s some shitty advertisingif that was my company, I would be devastated and have to fire the employee that put that in the mailbox and sent that thing to you. Shame on them poor quality, poor workmanship, poor everything specially poor you.
You wasted your money on that piece of crap
Thank god for star head bits. Phillips suck.
I'm Alone 😍😥
Should of bought a gold cube trommel...more portable and better built.
I have one of them. I’ve done past vids of it also. Good machine. Yes
Thanks for the video the trommel looks cool, AIGR out 🧈