All other videos say their rubbish but now that I've seen the internals.... im definitely getting one as it's basically exact same design to ghk glock 17 gen 3 with gas blowback nozzle so definitely gettign this
This was an interesting video. Thank you! Been thinking of getting this M17 as airsoft also. Got the pellet airgun M17 and just love it. This one started to seem as another choice - since it just might be lower in price. But apparently this F17 do differ a whole lot internally from the M17 - and therefore I'll be paying up for the M17 over this one.. Good video! Thanks!
they were both issued in the trials, the smaller version is just another configuration, As far as i know the small one is issued in USMC while the other one is everyone else
so, they made an extended mag that hold less than a standard one? why? the cool part is that the spring is actualy longer to fit in the larger mag. so... if icut the pice that keeps the underplate in place, and i make a hole in the plate, i will have anctual extended mag. i will try and tell if it works like it should.
Did this work? I have the Sig M17, and it looks about the same on the magazine. It had some bad issues out of the box that had to be fixed, but it's up and running fine now. Just wish that I had more capacity.
@@berkeleyharbin1787 i haven't tryed yet, i was about to do it but, hey covid 19! And, as you know, here in italy is not going well, when all this is over, i'll try.
@@cheesydebris yes, but actually no, baybe some were made to be used for training, but since airsoft is became more indipendent from tactical training an similar the majority of the replicas hold more rounds than the originals. and, as the real 1911 have 7/8 rounds, and the others hold 10 more, a normal person would prefer the higher capacity, expecially if there are no caliber difference. any way, is the standard mag that hold 21(airsoft), an extended magazine which hold less makes me think about california's gun laws, and dosen't make sense. P.S. if you want the real capacity, you just load the number of rounds you need, ok milsim, but they are not the only ones that play airsoft.
non solo softair this replica airsoft pistol was made specifically for the tactical training crowd. That is why the extended magazine is limited to the same amount that the actual firearm magazine holds. Other replicas are not, that is why the 1911 can hold more than 10rnds as that firearm is marketed to the gamer.
Have you figured out how to remove the mag release? I bought a black frame for my tan f17, and can't for the life of me figure out how to get the mag release out.
Hello bro. How is that gun after a year? Did you use AEG F17 a lot? I want to buy that replica and im thinking if it is good? Did you know what bucking fits there cos i want tu buy and put new bucking there.
At 5:36 the picture clearly shows the hop up rubber is shifted to the side, which will probably cause bb's fly to the side and not straight. How is the perfromance in real life?
Have you managed to add an RMR yet? I see there is an adapter plate for the Sig Air version but it looks like it has a different shape to the AEG blanking plate.
@Bespoke Airsoft I have one of these and have chatted with a few owners on forums who own this model also (P320) There seems to be a design flaw with the hop unit where it applies hop uneven from the top causing bb’s to swerve off to the right after 20/25 meters. Have you experienced any feedback regarding this from people who have purchased this from you? Tia
If you stop the video at 5:36, you will clearly see, that the hop-up rubber is shifted more to the left side from the vertical axis. This will for sure cause the HOP spin the bb's more to the side.
@@brightpri6692 The WE one hasn't good externals I think. I saw some slides with broken parts from use. Pot metal stuff. For overall quality I would go for the sig one. But if you have FPS limit issues, the WE one is lower, thus more suited for CQB fields. Though... If you go for the Sig and use blue gas instead of Green gas, you can match the WE in terms of fps too, which Imo is the ideal choice if you have the money for Sig.
Get the VFC instead much much better. Review forgot to tell you that the WE trigger is wrong shape, inner housing needs a screw to be removed which is wrong per real Steel. Stress parts (ie hammer strut sear etc) are made of cheap pot metal as opposed to Steel on the VFC. Have a nice day
The WE used the pre-recall trigger, which you are correct was never on the M17. Their fix for the recall was to replace the P320 trigger with the M17 one(as well as safety mechanisms already in the M17) As for the trigger parts, 100% agree. WE has always used garbage metal in their guns. That said my sidearm for the past 5 years has been a WE Kimber 1911 clone and has had zero issues. I guess that's what you get with pot metal: a crap shoot
I just hate that hammer glock kind design, it only gives troubles!. Why any commpany are not trying to replicate the striker design like GHK did, or something at least
All other videos say their rubbish but now that I've seen the internals.... im definitely getting one as it's basically exact same design to ghk glock 17 gen 3 with gas blowback nozzle so definitely gettign this
This was an interesting video. Thank you!
Been thinking of getting this M17 as airsoft also. Got the pellet airgun M17 and just love it. This one started to seem as another choice - since it just might be lower in price. But apparently this F17 do differ a whole lot internally from the M17 - and therefore I'll be paying up for the M17 over this one..
Good video! Thanks!
they were both issued in the trials, the smaller version is just another configuration, As far as i know the small one is issued in USMC while the other one is everyone else
the p320 m18 is also a military pistol. i believe the marines chose the shorter pistol as the sidearm of choice
I'm curious if you found any mounting plate for the optic mount. I tried mounting a sotac rmr on mine and I found out it won't fit.
No there are no backstrap what it is that it can swap different side frame along with the whole trigger mechanism
so, they made an extended mag that hold less than a standard one? why? the cool part is that the spring is actualy longer to fit in the larger mag. so... if icut the pice that keeps the underplate in place, and i make a hole in the plate, i will have anctual extended mag.
i will try and tell if it works like it should.
Did this work? I have the Sig M17, and it looks about the same on the magazine. It had some bad issues out of the box that had to be fixed, but it's up and running fine now. Just wish that I had more capacity.
@@berkeleyharbin1787 i haven't tryed yet, i was about to do it but, hey covid 19! And, as you know, here in italy is not going well, when all this is over, i'll try.
Because these were made to be training pistols for those who use the actual p320. The real extended magazine holds 21 rounds of 9mm
@@cheesydebris
yes, but actually no, baybe some were made to be used for training, but since airsoft is became more indipendent from tactical training an similar the majority of the replicas hold more rounds than the originals. and, as the real 1911 have 7/8 rounds, and the others hold 10 more, a normal person would prefer the higher capacity, expecially if there are no caliber difference.
any way, is the standard mag that hold 21(airsoft), an extended magazine which hold less makes me think about california's gun laws, and dosen't make sense.
P.S. if you want the real capacity, you just load the number of rounds you need, ok milsim, but they are not the only ones that play airsoft.
non solo softair this replica airsoft pistol was made specifically for the tactical training crowd. That is why the extended magazine is limited to the same amount that the actual firearm magazine holds. Other replicas are not, that is why the 1911 can hold more than 10rnds as that firearm is marketed to the gamer.
Please make how to fix tan f17 rapidding?
Have you figured out how to remove the mag release? I bought a black frame for my tan f17, and can't for the life of me figure out how to get the mag release out.
how do you switch the magazine release for a left handed user?
Hello bro. How is that gun after a year? Did you use AEG F17 a lot? I want to buy that replica and im thinking if it is good? Did you know what bucking fits there cos i want tu buy and put new bucking there.
At 5:36 the picture clearly shows the hop up rubber is shifted to the side, which will probably cause bb's fly to the side and not straight. How is the perfromance in real life?
I would love to get this but if something breaks it’s all proprietary and no way to get spare or aftermarket parts
Have you managed to add an RMR yet? I see there is an adapter plate for the Sig Air version but it looks like it has a different shape to the AEG blanking plate.
I have the Real M17 and the Sig pellet gun M17. I want to get the Sig Airsoft M17 now
How do you like the real M17?
It's nice reliable and durable
@Bespoke Airsoft I have one of these and have chatted with a few owners on forums who own this model also (P320) There seems to be a design flaw with the hop unit where it applies hop uneven from the top causing bb’s to swerve off to the right after 20/25 meters. Have you experienced any feedback regarding this from people who have purchased this from you? Tia
If you stop the video at 5:36, you will clearly see, that the hop-up rubber is shifted more to the left side from the vertical axis. This will for sure cause the HOP spin the bb's more to the side.
Compare it with the Official one.
I own the official Sig sauer M17 airsoft and the internals are completely different as well as the slide.
Will the WE mags work inthe sig??
@@flathead184 No they don't mate. And never the sig ones fit the we version from what I saw
@@The0Dark0Warrior which is better the sig one or the we one?
@@brightpri6692 The WE one hasn't good externals I think. I saw some slides with broken parts from use. Pot metal stuff.
For overall quality I would go for the sig one. But if you have FPS limit issues, the WE one is lower, thus more suited for CQB fields.
Though... If you go for the Sig and use blue gas instead of Green gas, you can match the WE in terms of fps too, which Imo is the ideal choice if you have the money for Sig.
Get the VFC instead much much better. Review forgot to tell you that the WE trigger is wrong shape, inner housing needs a screw to be removed which is wrong per real Steel. Stress parts (ie hammer strut sear etc) are made of cheap pot metal as opposed to Steel on the VFC. Have a nice day
The WE used the pre-recall trigger, which you are correct was never on the M17. Their fix for the recall was to replace the P320 trigger with the M17 one(as well as safety mechanisms already in the M17) As for the trigger parts, 100% agree. WE has always used garbage metal in their guns. That said my sidearm for the past 5 years has been a WE Kimber 1911 clone and has had zero issues. I guess that's what you get with pot metal: a crap shoot
I just hate that hammer glock kind design, it only gives troubles!. Why any commpany are not trying to replicate the striker design like GHK did, or something at least
he called it an aeg is it aeg or gbb
Is it a Co2 blowback or just spring?
24:16 green gas blowback
Lol
There's 2 versions of the m17 , your thumb nail isn't the one your taking apart , kinda misleading
これくそ🔫やろ。
急にフルになったり最悪
今叩き壊した。