Side Mount Tool Changer (SMTC) Double Arm Maintenance - Haas Automation Service Video

Having trouble with your Side Mount Tool Changer (SMTC) Double Arm? Service Engineer Orville Collins shows you how to diagnose and repair your double arm and how to order replacement parts on HaasParts.com
If you are not comfortable with any of the procedures outlined in this video, please contact your local HFO: www.haascnc.com....
If you found this video helpful please hit the like button and share it with a friend who might find it helpful too . . . and thanks!
Follow Haas,
Facebook - / haasautomationinc
Instagram - / haas_automation
Twitter - / haas_automation

[@Brooklin67s]

How do you get the plungers out if they don’t have that big flat on them?

[@MegaJohnhammond]

i have a 2014 VF-4, started throwing face mills. Looked like the plungers were sticking. Took it apart and everything was bone dry. No grease at all and it's never been apart. I was wondering why there isn't a grease hole in the side of the arm so you could pump a couple shots of grease in it once in a while

[@goldentrigun]

where did the light bar on a suction cup come from?

[@haasautomation]

You can buy the one we used in the video by visiting amzn.to/2bjc4Lj. Hope this helps!

[@ajayajju8329]

About DOOSAN HP5400 ATC MAINTENANCE PLEASE
MY MACHINE TOOL FALL DOWN ISSUE EVERY 1 HOUR

[@KiddiR]

GREAT VIDEO !! It helped a lot on one of our UMC's at work.

[@cobraframebuilding]

I love you guys!

[@mtdstc]

Why e-stop during tool change and not just jog the arm into its extended position? Not a huge deal if you have an auto recover button but a lot of machines don't and you'll have to reteach it visually.

[@thomasdwyer4362]

The plunger can not be removed with our VM6 2018 model. It hits the plate on the bottom of the double arm. Is there a way to remove this plunger?

[@creativetechnologies5394]

I HAVE VF2 I MACHINE ATC PERFORMANCE VERY POOR...! I WANT SPEED UP ATC WILL YOU PLEASE UPDATE THE NEW VIDEO FOE THAT BEST SOLUTION.

[@therealest1765]

what's the part number for the slider

[@ashishjha4781]

In our haas vf2, i can't find a plunger in double arm

[@susanreddy4308]

Please upload some more videos

[@erd39030]

How often should be done this maintenance?

[@haasautomation]

It really depends on how you use your machine. In other words, how many hours a day you use your machine, how many tool changes a day, etc. Generally speaking, inspecting the plungers for wear every six months is a good idea. Check to make sure everything is greased properly once a year. Hope this helps!