Projection of Solids_Problem 2 in AUTOCAD

Download the Manas Patnaik app now: cwcll.on-app.i... Problem based on Projection of Solids: Draw the projections of a cylinder 75 mm diameter and 100 mm long, lying on the ground with its axis inclined at 30 deg to the VP and parallel to the ground.
My Affiliate Links:
My Samson Go Mic: amzn.to/2xgE0qR
My Wacom Writing Tab: amzn.to/2xh8FEv
Books I refer: amzn.to/2xe550a
amzn.to/2xgbJ3E
amzn.to/2jJOMmf

[@__aspirant.]

You make me fall in love with engg. drawing

[@ashwinkrishna6897]

pha tyli

[@harshavardan9076]

You are much more better than our IIT professor.😍

[@Vigneshkumar-pz6bi]

u saved my semester sir .in my college EG exam kept 3 times in 3 times I failed sir but in my semester I'll pass with good percentage. tanq u so much sirrr. keep doing videos

[@orr7358]

which college from u bro

[@asgarh4589]

Give this man a medal... 🎖️

[@gokulsudhakaran6160]

Sir can we take the 30° in the opposite direction ?? And by the way your lecture is way better than other youtuber's

[@ManasPatnaikofficial]

YEs u can Gokul
no issue

[@hemant8614]

@@ManasPatnaikofficial Is it Our own wish for all the sums or is there any condition for it sir.

[@kvnthms5]

@@hemant8614 No condition. You own wish.

[@koushikvenkatsankarasetty8641]

Thanks bro, having the same doubt

[@akshithagonuguntla3690]

@@ManasPatnaikofficial -if we take the angle in the opposite direction we do get the diagram in the opposite direction

[@Raj-ig3wi]

joker at the back of laptop ♥♥

[@garuna9043]

Thank you for your great teaching and your teaching is simple mannar and easily understand

[@garuna9043]

Sir

[@gpnagpur2153]

Thanks ....sir i understand easily this tutorials....thanku so much.

[@ManasPatnaikofficial]

All the best then......

[@-ArshdeipSingh-ww4ue]

Sir you are the best teacher👍

[@adityaranjan5572]

sir that was too good.U explained it very well.

[@ManasPatnaikofficial]

Hi Aditya..........First of all....Thanks for appreciating my work....
I always focus on giving you guys excellent quality free education....
All the best in life and do let your friends know about this channel on drawing and mechanics so that they can also benefit....

[@sandhyabadike2295]

nice videos we can get very easy by seeing u r lecture

[@qazitanseef8374]

Sir i got low marks in mid term in drawing but nw i saw ua video u r great i think i have understood everything n surely i will now top in my semester exam.....

[@ManasPatnaikofficial]

Thanks for appreciating my work Tanseef...
All the best man
And do encourage and recommend this channel to your friends...

[@Ajay-oe2se]

sir please include solid cube with solid diagonal concept. all ur videos are really very good .

[@ManasPatnaikofficial]

Ya sure Ajay...
I will include that in near future....

[@rishiraj3959]

very nice videos :) will recommend to my family and friends

[@ManasPatnaikofficial]

Rishi....Thanks for appreciating my work....
All the best in life
And do share and recommend this channel to your friends and classmates so that they can also benefit...
Cheers....

[@harshpitale4866]

Manas sir ur videos are the best.. Now eg seems easy

[@hiteshnanda3863]

sir is it necessary to divide circle in 12 equals part actually sir in my book all examples of circle solved by division of circle in 12 equals parts. And sir good understanding in ED by seeing your videos thanks sir

[@ManasPatnaikofficial]

8 parts take less time....
And thanks Hitesh for appreciating my work..
All the best and do tell your friends about this channel so that all can benefit...

[@manikantanayak3359]

Mind blowing sir.thank u so much.hope you do more like this.

[@manikandans6031]

Good use for engineeeing students..

[@ratank7511]

I am very thankful for what you have provided
Thank you very much

[@AmarSingh-rq7rj]

Sir Are you using AutoCad for drawing in this video?

[@rockstar5001]

Tq sir your explanation is very clear

[@ManasPatnaikofficial]

You are welcome Shaikh...
Topic-wise Playlist of Engineering Drawing / Engineering Graphics in English
1. Orthographic Projection: th-cam.com/video/WG6H2pISUzQ/w-d-xo.html
2. Projection of Point: th-cam.com/video/fK4h5gM73w8/w-d-xo.html
3. Projection of Line:
OLD:
th-cam.com/play/PLIhUrsYr8yHz_FkG5tGWXaNbIxVcibQvV.html
NEW:
th-cam.com/video/pzE0D-Ijxd4/w-d-xo.html
4. Projection of Plane: th-cam.com/play/PLIhUrsYr8yHx7TVB51jN3HZVyW3R6RiBg.html
5. Projection of Solid: th-cam.com/play/PLIhUrsYr8yHxARPzEFz1nXgt8j6xF_tEm.html
6. Section of Solid: th-cam.com/play/PLIhUrsYr8yHwAbiCATZUbzd_CpF0EHF3v.html
7. Development of Surface: th-cam.com/play/PLIhUrsYr8yHwdB96ft6c0Uwc4SDCLuG1v.html
8. Auxiliary Plane: th-cam.com/play/PLIhUrsYr8yHxHWk2TCg1SrphF1vKpHXoB.html
9. Interpenetration of Solids: th-cam.com/play/PLIhUrsYr8yHyTGceE1TGhCSxxfHyFpnNM.html
10. Isometric Drawings: th-cam.com/play/PLIhUrsYr8yHxVky7bfrnbRcdXcHjT_K83.html
11. Conic Sections: th-cam.com/play/PLIhUrsYr8yHx0TuqsY0FUZ7Z24BbKxJoQ.html
12. Cycloidal Curves: th-cam.com/play/PLIhUrsYr8yHwwA8eBea78pJW1lw9XAv6z.html
13. Involute:
th-cam.com/play/PLIhUrsYr8yHzu8pqYvGwQoJKVpuS1Jusa.html
14. Plain Scale and Diagonal Scale: th-cam.com/play/PLIhUrsYr8yHwTgo_zu_ELqOC1ypcp5Gr9.html
15. Complete Engineering Drawing in one single Playlist: th-cam.com/play/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS.html
Topic-wise Playlist of Engineering Drawing / Engineering Graphics in Hindi
1. Orthographic Projection in Hindi: th-cam.com/play/PLIhUrsYr8yHy3chHVzYA4BMbY9DbhyYSY.html
2. Projection of Point in Hindi: th-cam.com/play/PLIhUrsYr8yHwinNUxVA1NW0xxLRlDfINH.html
3. Projection of Line in Hindi: th-cam.com/play/PLIhUrsYr8yHyvWb87YtG3A3jDEnChgzir.html
4. Projection of Plane in Hindi: th-cam.com/play/PLIhUrsYr8yHxj9N5e1oZA0x_k5ZVssf3U.html
5. Projection of Solid in Hindi: th-cam.com/play/PLIhUrsYr8yHylYPjrulRGm8DSPiimxP3P.html
6. Scales Hindi-Urdu:
th-cam.com/play/PLIhUrsYr8yHzJA426HjlEmiRqUkJTkozB.html
Topic-wise Playlist of Engineering Mechanics / Applied Mechanics / Fundamentals of Mechanical Engineering in English
1. Forces:
th-cam.com/play/PLIhUrsYr8yHzoyUutEK57JzWy1n-vxIS0.html
2. Friction:
th-cam.com/play/PLIhUrsYr8yHwY1TDraJpyYkU8Zug-kM4m.html
3. Shear Force and Bending Moment: th-cam.com/play/PLIhUrsYr8yHy1lc0hEhbpEAGsGwNmUWt7.html
4. Trusses:
th-cam.com/play/PLIhUrsYr8yHwIXEt9cqjEsEO8l83xcIf7.html
5. Centroid and Centre of Gravity: th-cam.com/play/PLIhUrsYr8yHzZ52dVA3wQ_0IQVl7CKL7p.html
6. Moment of Inertia:
th-cam.com/play/PLIhUrsYr8yHw8qWxAVOx-5Y2XfGPOmcDy.html
7. Dynamics:
th-cam.com/play/PLIhUrsYr8yHwOZxmY63A_lURu6c-jNk-z.html
8. Complete Engineering Mechanics / Applied Mechanics in one single Playlist: th-cam.com/play/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS.html

[@_SubhanKhan_]

Sir why did you took 20mm,2cm below from reference line at starting construction of top view even though there is nothing mentioned in question? Please reply....

[@hareeshmonsterharizzz7975]

It is our wish we can take any measurement as we wish

[@statuskeeda]

Sir why we take 20 mm distance below to the xy line

[@atomjackman1089]

Ankit Aryan it can be any distance from xy till it doesnt interesect with xy line

[@ravipratapsingh9910]

in step 2 if rotate we rotate the figure by taking 30 angle on the other side will it make a diffrence?

[@ManasPatnaikofficial]

Its fine....go ahead

[@maheshlingamguntla8345]

Sir can we take the 30° in the opposite direction

[@DishaBora19]

Thank you so much sir, u made the problem very easy to understand

[@piyushdp6919]

1. A cylinder of base 60 mm diameter and height 80 mm has the midpoint of the axis 60 mm away from both the RP. The axis is inclined at 300 to the VP and 600 to the HP. Draw the projections.

[@45_farmaankhan30]

Why you made 30 in opposite direction? I know it is correct but is it due to some reason you are doing it this way?
. please explain

[@visi6446]

Sir u r best now I am ready for exam

[@kunchapuvenkatesh7615]

Super explanation sir

[@ManasPatnaikofficial]

Thanks Venkat.....
Enjoy all the stuff.....

[@guriginjakuntamallikarjuna8004]

It's really good sir to learn engineering drawing from ur vedios.Tqs so much sir.can make the vedio on tetrahedron

[@johnkumar9619]

Thank you sir for helping the students

[@ishagupta5527]

sir how do you know that circle you have to draw above xy or below xy... can We take the circle below as there it's not given the top view or front view..any clue line

[@ManasPatnaikofficial]

Isha...watch the video once again, the clue lies in the explanation...

[@pravalika5042]

Super sir

[@sayershaik1027]

Wow simply awesome
Ur amazing
Hatsof to ur teaching skills and for ir patience thank you very much sir

[@ManasPatnaikofficial]

1. Engineering Drawing (English) :
th-cam.com/play/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS.html
2. Engineering Drawing (Hindi) :
th-cam.com/play/PLIhUrsYr8yHx0C3ebAW-FQxTP8ig8-QxU.html
3. Engineering Mechanics:
th-cam.com/play/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS.html
4. Mechanics of Solids:
th-cam.com/play/PLIhUrsYr8yHzft7ygw5THZo4aDcsxEadP.html
5. Theory of Machines:
th-cam.com/play/PLIhUrsYr8yHx0aFXSQvT7nm6ivJSMKnAU.html
6. Machine Drawing:
th-cam.com/play/PLIhUrsYr8yHzwT06rv7u3tqdfmmKOCz1w.html
7. Engineering Services Examination_Engineering Drawing_Prelims:
th-cam.com/play/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU.html
8. Physics for Class 11:
th-cam.com/play/PLknJ2c9H1euEwtFJLUGZvkjG35OoVvemM.html
9. Manas Speaks Series:
th-cam.com/play/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0.html
10. Physics Channel Link:
th-cam.com/channels/_aqx41HWeOebfL6FqBYU6Q.html

[@raphazard8737]

Sir i like the way you teach thank u

[@Shaik_Afjal]

Sir I told my frnd about u r videos ..he edicted to your channel sir ..

[@ManasPatnaikofficial]

All the best.
1. Engineering Drawing (English) :
th-cam.com/play/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS.html
2. Engineering Drawing (Hindi) :
th-cam.com/play/PLIhUrsYr8yHx0C3ebAW-FQxTP8ig8-QxU.html
3. Engineering Mechanics:
th-cam.com/play/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS.html
4. Mechanics of Solids:
th-cam.com/play/PLIhUrsYr8yHzft7ygw5THZo4aDcsxEadP.html
5. Theory of Machines:
th-cam.com/play/PLIhUrsYr8yHx0aFXSQvT7nm6ivJSMKnAU.html
6. Machine Drawing:
th-cam.com/play/PLIhUrsYr8yHzwT06rv7u3tqdfmmKOCz1w.html
7. Engineering Services Examination_Engineering Drawing_Prelims:
th-cam.com/play/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU.html
8. Physics for Class 11:
th-cam.com/play/PLknJ2c9H1euEwtFJLUGZvkjG35OoVvemM.html
9. Manas Speaks Series:
th-cam.com/play/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0.html
10. Physics Channel Link:
th-cam.com/channels/_aqx41HWeOebfL6FqBYU6Q.html
My AMAZON Store - For all you students.
www.amazon.in/shop/manaspatnaik

[@dileeppalla]

Why do we turn the cylinder 30 degrees towards left not right?

[@nishita5643]

Thankyuu sooo much..for explaining

[@shivakumarsanaga3989]

While saying object is laid on the ground...u draw some times on the hp and some times below hp ...hw can i know that this shuld be drawn below hp or above hp????????

[@avinashbiradar9173]

Superb explanation sir

[@25rizwana68]

Sir, I have a question related to the cylinder which i am unable to understand.
Q:A cylinder 40 mm diameter and 50 mm axis is resting on one of a base point of a circle on VP while its axis makes 45 degrees with VP and FV of the axis makes 35 with HP . Draw it's projections

[@classmate18]

God bless uhh sir..

[@arunakamara4140]

Thank you very much sir❤

[@venkateshgoud9324]

Thank u..very good explanation

[@ramgopalraju897]

Sir sometimes u r making the circle into 8 equal parts and sometimes 4 parts.....when we have 2 do those???

[@ManasPatnaikofficial]

Ram....when did i do 4 parts....
Unable to recall right now.....

[@rahuls.5740]

sir very good videos really helpful.. one doubt: How come you didn't darken the f'6' e'5' and d'4' lines sir? How to know which lines to darken and which lines it is not needed? Thank you for great videos sir.

[@sagardagar2415]

sir , why u take angle 30° anticlockwise from reference line xy but not clockwise?

[@hemant8614]

Same doubt

[@deepanshu6576]

Clockwise leke bhi hojayega

[@sumitdhivarearningguru1071]

Yes sir same doubt please solve the problem 😢

[@spandanamandhapalli2350]

Sir,can you please explain how to identify hidden edges

[@Shaik_Afjal]

A Hexagonal prism has one of its rectangular faces parallel to the HP it's axis is perpendicular to the VP. and 3.5cm above the ground .draw it's projections when the nearer end is 2cm in front of the VP. Sides of the base 2.5cm long,axis 5cm long. Sir please explain this question there is doubt Of this ....

[@huntersai4856]

Nice Explaination sir👌👏

[@kesh5438]

13:58 why angle is taken at left side why not right side?

[@t.s.paramesh3572]

what is meant by ground its either vp or hp or reference plane

[@ManasPatnaikofficial]

Ground means HP...

[@t.s.paramesh3572]

Manas Patnaik thanks

[@DubsmashAdda]

sir how to draw..if the question is asked..A cone of diameter 60mm is resting on the hp on one of its generator.draw its projections if its axis is parallel to vp..in this question there is no inclination asked..so how to draw..just say it sir..plzz..

[@rudrakshpatil6697]

Sir my college use auto cad so plz explain with commands 🙏🙏

[@ankan2526]

everything is cool, just put the ads at the beginning or the end of the video...

[@mahfuzhossainmallick8353]

A cylinder 40 mm diameter and 50 mm axis makes 30 degree
inclination with vertical plane and axis parallel with horizontal
plane. Draw its projection

[@shahidullahmuffakir668]

hello sir,
thanks for these
please teach one example in cube projection

[@goutamdas838]

sir u r realy greatful......sir can i knw u r from???
tq sir...

[@ManasPatnaikofficial]

Well Goutam...I am from Raipur, Chattisgarh...
I am glad to know that my lectures are benefiting you....
All the best

[@nareshm5857]

Sir why you are taking angle in opposite direction is their any specific reason

[@jayachandramatta3277]

Sir i am not able to understand the half ellipse which we can see and can't see

[@ManasPatnaikofficial]

Just try to imagine that scenario....i am sure u can work it out

[@riteshkhaire5964]

Sir, the darken part and the 30 angle projection isn't matching.
You made a mistake there I guess.

[@bhushanpande2174]

Are we able to take 30 degree in opposite direction

[@ManasPatnaikofficial]

yes u can...

[@directionless9032]

very very nice sir

[@ManasPatnaikofficial]

Thanks for appreciating my work....
All the best in life...
And do let your friends know about this channel so that they can also benefit....

[@directionless9032]

sir one more thing plz make video on projections of point line and plane on auxiliary planes plz sir it's my humble request

[@ManasPatnaikofficial]

sure Raza.....

[@saikiran7635]

Sir plz make video on projection of solids in auxiliary method to manage our time plz it my humble request plz

[@laarningwithrgacademy420]

Sir, I think axis of cylinder is Draw with dash line as it does not seen i.e (it is hidden part)

[@dhruvsahu5251]

Sir in step 2 you have inclined a cylinder at an angle 30 in anticlockwise sense can I take it clockwise sense.

[@qazitanseef8374]

Thanku so so much

[@Kumar-2966]

Very nice and very good sir

[@mkkoushik1965]

Sir, why we should draw 30 degree to vp at right side and why can't we draw on left side

[@princev3634]

In previous class you choose angle right side, now in this you choose Left, What to do ?

[@ManasPatnaikofficial]

Both options are correct.

[@princev3634]

@@ManasPatnaikofficial thank you sir, I am quite clear after attending your Online tutorial

[@pranavahuja6773]

Sir how did u draw that ellipse on AutoCAD?

[@ManasPatnaikofficial]

try using the ellipse command

[@paramgoswami4456]

Can we change the angle from 30 to - 30? will it change the question?

[@ManasPatnaikofficial]

+Param Goswami
Yes Param u can do that....

[@shaireenwaheed6492]

Sir why U take 30°inclination from right can I take It from left
.

[@venkatakishore559]

Tq and you explained very well

[@rahulnishad7514]

Sir,Cylinder laying on ground line not in horizontal plane and where is ground line . Ground line present in 3rd or 4rt coordinate

[@vaibhavbangia]

Thanks!

[@vinodhi576]

Why can't we take 30.° in the other side of the protractor ?

[@Ruma_studio]

thank you very much sir this video is supportive

[@suhailahamsa]

sir,firstly ur class is really helpful .thank u .and my doubt is that, is it compulsory to touch the XY line wen we draw the circle? and if the figure is too big how can we reduce its scale while drawing in paper.

[@latesthindimasalamovies2642]

Sir r u solving all problems in planes, solids,and development of solids in 1st angle projection

[@ManasPatnaikofficial]

Yes.....

[@cricketnewswithmukesh]

Sir why half side of elipse invisible

[@ManasPatnaikofficial]

You have got to imagine it mukesh.....

[@SekarSekar-xb7zg]

If we can draw the angle line in right side also sir?

[@jyotirajnandani368]

Thank you very much sir

[@rajhedau3437]

u r great sir

[@ManasPatnaikofficial]

Hi Raj.........
Keep learning and do let your friends know about this channel so that they can also benefit...
All the best

[@rajhedau3437]

Manas Patnaik Ya Offcourse Sir

[@rajhedau3437]

Manas Patnaik Plz Sir Upload AutoCad Tutorials 2nd Sem In 2016Version Orthographicsn Isometrics

[@bhushanpande2174]

Why we are nt able to represent the top view of the end portion by dotted lines as we have done in previous question

[@chess_material]

🔥😊Nice ♥️ explaination 👍🔥

[@tejasribaditela381]

Sir here in the first step we should take base is on hp...before going to second step so, if we take in that way then top view becomes front view...and vice versa is that correct...???

[@ManasPatnaikofficial]

Here axis is inckined to VP therefore keep the base on VP and then try to work out from where the true shape of base can be visualized. That is obviously from the front and hence we start by FV.

[@tejasribaditela381]

Thank you so much sir...

[@mohdaltaf6491]

In the last problem you took the angle in the different direction , but here you took the angle in this way.
Pls tell me in which way we should mark the angles I.e the way you showed in this problem
Or in the problem no. 1 ??

[@009-ece-chareeshmas5]

Tq so much sir

[@AMANKUMAR-un6pg]

Sir, I don't understand that when angle make right or left side with respect to reference line xy solve this proplem

[@ManasPatnaikofficial]

Its your choice.....
Clockwise or anticlockwise

[@govardhanalakunta9284]

Sir... Good

[@harishbadiger9514]

Draw the projection of cube of 40mm sides is suspended freely from one of its corner such that the axis appears to inclined at an angle of 35 to VP
Sir how to solve this type questions💭❓

[@saravanan3749]

Invisible part ahh bracket la thala sir podannum ?...🤔

[@lawrancej7473]

Avaruku Tamil theriyaathu pa!!!

[@vinayjustin8138]

Sir u said when ever the axis inclined to plane ....90-teta ...but in this u didn't do 90-teta ...y???

[@kogantisasank4025]

Have you done the question according to right of observer

[@saumyaneelam3208]

Sir what's difference between projection of plane nd projection of solid

[@katamanenirohith6482]

why you taken inclined plane 30 degrees at other side why
so clear the this doubt fast

[@goutamdas838]

i tel so many people to watch ur video .....

[@DSA_decoded]

What about hidden points labelled with brackets

[@aravindarra-m-0553]

Sir,I have a doubt in measuring an angle

[@omkarmahajan6272]

Please explain inclinations with hp and vp