ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก

Prologic C series Alarm set 4+1+1

แชร์
ฝัง
  • เผยแพร่เมื่อ 10 ก.ค. 2022
  • Sziasztok!
    Az új Prologic C series elektromos kapásjelzőét mutatom be ebben a videóban.
    Egy tanács mielőtt párosítani akarjátok a szettet előtte nézzétek meg, hogy párosítva van mert nekem már gyárilag a párosítás megtörtént.
    Még egy észrevétel ha felmerülne bennetek ez a kérdés is. A szett megőrzi a beállításokat kikapcsolt állapotban is. Csak abban az esetben nem ha kiveszed belőle az elemeket, de újra párosítani nem kell ha már egyszer párosítva volt. A sátorlámpában fixen van benne az elem, de ha elromlik cserélhető. Csak a bekapcsolásnál kell állítani, hogy alvó üzem módba rakod vagy folyamatosan világítson és a fényerőt állítod rajta a többit megjegyzi. A távevőegység azon a hangon jelez amire a bottartófejegységet állítottad ha lehalkítod a bottartó fejegységet és a hangerőt rajta hagyod távevőegységen akkor csak a távevőegységen fog szólni azon a hangon amelyikre beállítottad a bottartó fejegységet a távevőegységen van néma és rezgés üzemód. A távevőegység 100m-re van hitelesítve kb annyit is tud vagy még annyit sem, de pontosan nem mértem le . Remélem tudtam segíteni. Üdvözlettel Tibor és görbüljön!
    Hi!
    In this video, I present the electric bite indicator of the new Prologic C series.
    A piece of advice before you want to pair the receiver the head unit and the tent lamp check whether they are not paired, because they were already paired for me. Regards and good fishing
    One more note in case this question comes up. If you turn it off, it saves your settings, the entire set. Not if you take the batteries out of it, but you don't need to pair it again if it was already paired. The battery in the tent light is fixed, but if it breaks, it can be replaced. You only need to set it so that it is in sleep mode or the brightness is on, you set it manually, the other settings remain. The remote will tell you what sound you have set the head unit to, if you turn down the volume on the head unit and leave the sound on the remote, the remote will only play the sound you have set the head unit to. The remote control has vibration and silent modes.The remote receiver is certified for 100m, it can do about that much or not even that much, but I didn't measure it exactly I hope I could help. Greetings Tibor and good luck!

ความคิดเห็น • 34