Merry Christmas! I recommend using a macro that spams the conveyor for you IF THE BUILD BECOMES UNCONTROLLABLE WHEN USING THE CONVEYOR REMOVE ALL DEFAULT LANDING GEAR If your plane is not maneuverable enough for this: A) Add ballast to the nose and balance it out with wing panels B) Increase elevator motor2 angle C) Add control surfaces/propellers
@@lucienpapercraft5171 this is just a theory but I'm pretty sure it keeps most of the momentum that you had keeping you going the same way no matter your rotation
i have a problem with the thrust vectoring, i only was able to fit it if the motorlock tower goes from left to right, not right to left. i see in the video that you managed to fit it with the tower that goes right to left, how did you manage to do it.
@@pro_gemer what i mean is that the tower GOES from bottom left to top right, that doesn't work for me, i only managed to make it work with a motor lock tower that goes from bottom right to top left, both when you look at it from the left
Hey when i make my cobra manuever using a thrust vector, when i activate using conveyor my entire build glitched out. I have motor 2 to control my surfaces. I also use the Thryst vector My build is just a frame Can u tell me what im doing wrong? What should i set my macro to?
Add weight so it's balanced, not in the back Conveyors lock the movement of your plane in one direction creating massive angles of attack, although you need weight for the airplane not to gain altitude
@@pro_gemer alr thanks, but my plane keeps trying to spin around a lot especially after I add ballast or such stuff like wing panels in the nose. How can I fix this?
This doesn’t work on any of my jets (also can you make a simple jet so we can have a base idea for other jets since I still have no idea how to apply this to my jets also when we want to do the cobra what keybinds do we do for conveyor)
If that doesn't happen when you try to go down it's because your center of mass is too far back, another way to test it is to slow down, if your nose goes up at lower speeds and does at higher, put some weight in the front of the plane and your engines lower
Here’s a more detailed version of what’s happening: the up and down is way too sensitive ever since I added the ballast blocks and the yaw is unbalanced yet I only have 1 1x2 wing panels
@@evolver54 it might've been too much, try adding some dampening in form of 1x1 wing panels in the back until it works well and maybe decreasing motor2 max angle on elevators/rudder
Whenever I tried to do anything with it, it has 2 problems. Number one is that it freezes for a small amount of time removing all of my velocity, no matter how hard I try to fix it. Number 2, I can't pull up enough even if I DO make it through without pausing. Any help?
First one might be bad latency, fps or physics lag Number two add weight to the nose and balance it out with wing panels in the nose (or control surfaces if they give you enough directional drag)
@@pro_gemer Ah! good to know. I got traditional supermaneuverability in the way that i can flip on the spot, but can't pull any maneuvers. Tried adding weight, didn't help much. Another guy said to minimize wing panels to get better performance with maneuverability. Computer's kind of a beast, so the FPS probably isn't the case. Maybe just physics lag or latency?
@@pro_gemer hey, i just did it! thanks, but i can't do it sustainably as it still slows down too much and stutters. what settings did you use for your macro? i'm using logitech G hub with 50 ms delay between release of the keys and another 10 ms delay after key is up
Hi, I’m here to correct something. Instead of using conveyors you can just use (small) propellers to achieve the cobra or super maneuverability that is. Second, you can either use traditional thrust vector or use propeller guided maneuverability. The thrust vectoring part is optional is might not be needed in most airframes (builds) but I recommend not to put the thrust vectoring part for maximum compatibility as it can be a little bit too much of a struggle or problem on other builds. That is all, Thank you in advance if the creator of this video reads this. P.S - I’m sorry if I have some mistakes in my correction. Thank you!
The thing is, alot of propellers makes your game lag and doesn't achieve as good of an effect as conveyors, aswell as it's not nearly as smooth, powerful at high speeds as thrust vectoring
When I go for a cobra i pull up and hit R my conveyer key bind a bunch and I just do a normal turn upwards. I don’t do a sharp turn and stay at altitude
@@patrickwelch365 note that your jet needs to be REALLY heavy, if you have a private server try putting the gravity slider all the way up and cobra? if that doesnt fix add some wing panels in the nose and balance it out with weight if too much
This won't work on all planes, that's one quirk of plane crazy Would be glad if you made a detailed description on what happens so I can actually help and no, I don't make tuts
I made a su27 with all of these parts and i still cant do cobra, i cant even lift up that good at speeds of 700 to 1k, idk what to do i was tryna add propellors for lift but it didnt work, what do i do?
@@pro_gemer so i did some changes and the new problem is is that i cant pull up anymore for the cobra. ive tried to change some weight on the front but then it wont cobra can you help?
@@Tree.... well that sounds like a balancing issue, though for some aircraft conveyors cause elevators not to work i think, i dont know the fix for it here is my general guide for balancing -fly up and lower engines to 0 while in leveled flight after that try flying straight at decent speed -if the plane pitches while falling your centers of drag and mass are away from each other, add ballast to the side that goes up (either tail or nose) -if the plane falls down without any rotation but pitches down while flying straight its an issue with your center of thrust, move your engines lower or do opposite if the problem is in reverse
Merry Christmas!
I recommend using a macro that spams the conveyor for you
IF THE BUILD BECOMES UNCONTROLLABLE WHEN USING THE CONVEYOR REMOVE ALL DEFAULT LANDING GEAR
If your plane is not maneuverable enough for this:
A) Add ballast to the nose and balance it out with wing panels
B) Increase elevator motor2 angle
C) Add control surfaces/propellers
I told him to add that :)
Quick question, whats a macro I could use? Ive tried one but it just doesnt work
@@infraparadoxx you can use autohotkey or your mouse/keyboard driver
1) Wait, conveyor is just default setting?
2) Ik the the conveyor pushes the plane further, not stall, but how does it work exactly?
@@lucienpapercraft5171 this is just a theory but I'm pretty sure it keeps most of the momentum that you had keeping you going the same way no matter your rotation
The thrust vectoring is so small, I could actually add it to my mini su 57 :D
Thanks! im planning to make a super manueverable a380 and im glad i had this guide
Emirates would like to hire you
hey! you wont need to add ballast!
@@udsoncamp3202 for clean and long cobras you need it, for very basic ones yeah no need for em
@@pro_gemer yeah but it's an a380
uhm
Yo I’m from Australia and Christmas is on the 25th yk what that means, I have to wait till 25th at like 5pm
Just going to say it, you are a lifesaver bro.
thx for the guide i really appriciate the guide and i used this to my f-22 :)
Glad I could help ;]
this really helped me with cobra-ing tysm pro geer
Glad to hear! :D
Can u pls do tut on the plane
BRO THANK U THIS HELPED ALOT!!!
If you want the vectoring to be stronger just change the max angle for the motor 2s on the side
I used an old su 35 for this and it works amazing if you see an over locked blue nam nam jet it’s probably mine
You can also use the new gyros, they work the same but more simple
Also, how did you made the thrust vectoring thing that small and compact on the last video
Will be in the video :)
Ooh okok
thank u for ur help i will sub and like ☺ ☺
If you have any questions feel free to ask
thank u @@pro_gemer
that su27 is epic and nice tut it helps alot
Ive been trying t o make an SU-35 that was able to do a cobra, this helped me alot thank you
The same for me
Bro with the music thought this was an Episode of how its made \:
finally a tut helped my jet do make my OWN COBRA
i call it the kinfe attack'
If I spam my keybind for conveyor it just snaps into different positions and it doesn't fly smooth
I got 3 questions: 1 does this work on Heavy motorlocked builds? 2: Does Roscale builds also work? 3: what if my aircraft is already super heavy
1 yes
2 yes
3 no need for ballast unless your aircraft climbs in altitude while doing a cobra
Ok
Well thanks! so now i can show to my freind this video, that he really wanted to knew how to do that! thank you :D
Ayyy
I hope this vid blows up
why is this channel so underrated
:D
here before this releases
very big thanks i now have my first supermaneuverabitle plane
I made a nam nam jet with a bomb half the size of the plot and some how can cobra in it
Thanks it works
i have a problem with the thrust vectoring, i only was able to fit it if the motorlock tower goes from left to right, not right to left. i see in the video that you managed to fit it with the tower that goes right to left, how did you manage to do it.
I used a vertical tower lol
@@pro_gemer yes ik
@@pro_gemer what i mean is that the tower GOES from bottom left to top right, that doesn't work for me, i only managed to make it work with a motor lock tower that goes from bottom right to top left, both when you look at it from the left
what settings on the conveyors?
prob default, i think you should try all the settings.
It's default, he replied to someone just use a key bind that you can spam quickly.
as the others said its default, just change the keybinds
wat do you maen spamming? what is a setting of conveyor?
now I found a different way to kulbit, I just added a lot of ballast block and thrust vectoring.
Thank u bro i can finally cobra and more ◕‿‿◕
Hey when i make my cobra manuever using a thrust vector, when i activate using conveyor my entire build glitched out. I have motor 2 to control my surfaces. I also use the Thryst vector
My build is just a frame
Can u tell me what im doing wrong? What should i set my macro to?
uh im not sure, try removing default landing gear blocks since they glitch out most of the time
Can you just slap a conveyor on the jet or does it have to be like a conveyor engine or facing a certain way 0:39
it is not a conveyor engine, a singular conveyor instead
thx i'm planning to make my favorite su-27
Theust vectoring hover drive?
Infact yes, that's how my thrust vector works
@@pro_gemer gjsolo thrust vectoring hover drive?
@@keith0keith01 gjsolo does not thrust vector his hover drives
@@jog4220he does he uses them on his x 44 and su 27
Happy Christmas eve
You too :D
You too my guy hope you enjoy it
You too
Ur best video
I did this with madvulpens’ f-22 plus vapor trails, looked awesome
Glad to hear
Can i know do i need turn on/off thruster or normal thruster
my su-27 can cobra without thrust vectoring should i do tut
Epic wideo my friend. Btw ehen you coming?
I'm always coming
@@pro_gemer same my man im coming right now as we speak :)
Quick question: do you need to have disconnector wings to make it fully work?
There's no reason not to use them, for clean and decent distance cobras I'd recommend you using em although it's not a necessity
@@pro_gemer ok thanks
@@pro_gemer also last question, when clicking the conveyor key, do we click the forwards or backwards jet for the conveyors
@@theproatthegame6160 doesn't matter at all
@@pro_gemer ok thanks
how to make 1:1.8 scale su-35 flanker e cobra i cant get enough maneuver
fr though adding the whole obese us citizens onto a lightweight jet make it supermaneuverable
Hey is there a certain configuration to the conveyors?
"It's like Christmas morning"
very tenks to pro gemer for make my suka 27 cornflanker cobra
Can you please help on why my plane yaws on my kulbit and cobra? i have removed all my verticle wing panels except my rudders and i still yaw a lot
well idk why it happens to some planes alot sorry cant really help
Too much weight ermm...
sad thing is like 2 years ago this was crazy now people make tuts
i need help on where to put the thrust vectoring on my jet since it always bugs out and goes a block above where it’s supposed to go :(
it is not necessary to have tvc
can this system be installed on the namnam ch plane?
It was designed to be used in this build style :)
@@pro_gemer I keep trying to make it like in alloy but it can't maneuver like cobra😥
@@pro_gemer I gave up installing this system on Namnam's plane ch😥
@@fakhrizaalfauzan5957 it's so simple though, you just add weight and conveyors
@@pro_gemer How to use the conveyor, how about a pro gamer?
Two questions:
1. What do the conveyers actually do?
2. Wouldn’t adding weight to the back just make the plane unstable and not fly straight?
Add weight so it's balanced, not in the back
Conveyors lock the movement of your plane in one direction creating massive angles of attack, although you need weight for the airplane not to gain altitude
@@pro_gemer alr thanks, but my plane keeps trying to spin around a lot especially after I add ballast or such stuff like wing panels in the nose. How can I fix this?
@@TRtraybloxeey which way does it flip?
@@pro_gemer it just spins, like rotates along the horizontal axis to the left or right
@@TRtraybloxeey seems like it's unbalanced or has too high center of mass
vectoring thrust would be cool
Erhmmmm, actually it's "thrust vectoring"🤓☝️
🤓👌
How to fix the wobble 😭 my SU-35 not wobble so bad while doing it
do this plane on keyboard control or mouse control?
its keyboard control im 99% sure
Works with mouse
we will find out tomorrow :>
Is this work at a bigger jet?
Ye it does although you have to change up the thrust vectoring a bit if you want o
Did you use trapdoors as wings because I'm trying to make a plane decated to this but i wana know
Also when i try to cobra i just go up
nvm i just had to like tripple the weight lol i think its bc i was useing a nam nam jet so it was very very lite
i used disconnector wings as they have many advantages
thanks i did the cobra maneuverr
also whats was the camoflauge can you give in colour code
Could you make a tutorial on the jet you show in this video none of my jets cobra with the blocks you told me to add
Whats the color of the nozzle
I cant find the color thats similar to the black emoji
Anywhere from 40 40 40 - 60 60 60 should do fine, for more precision you can use a color picker tool on the black square instead
I jus watch dis becuz is epic!,!,!!,,
Finally i can add it to my Su-35
:D
This doesn’t work on any of my jets (also can you make a simple jet so we can have a base idea for other jets since I still have no idea how to apply this to my jets also when we want to do the cobra what keybinds do we do for conveyor)
You set the conveyor to any keybind (doesn't matter if it's forward or backward) and spam that key while pulling up
bro did you put keybinds on conveyor because I really need it except the weight and the small tvc
edit : I mean did you put it or not
On either side make it anything you can spam
@@pro_gemer >:D Man I did it on my own long "nam nam" jet
and....
I think put did it too much because I put propeller on rear wings 💀👍
been experiencing another issue whenever I try to go up, even a tiny bit, my planes nose would fling up and do a backflip, how do i fix this?
If that doesn't happen when you try to go down it's because your center of mass is too far back, another way to test it is to slow down, if your nose goes up at lower speeds and does at higher, put some weight in the front of the plane and your engines lower
Here’s a more detailed version of what’s happening: the up and down is way too sensitive ever since I added the ballast blocks and the yaw is unbalanced yet I only have 1 1x2 wing panels
@@evolver54 it might've been too much, try adding some dampening in form of 1x1 wing panels in the back until it works well and maybe decreasing motor2 max angle on elevators/rudder
@@pro_gemer k I’ll try
my internet is working and now i can do cobra but im going to ask 1 question is why does my jet wobble back and forth when i do cobra?
Wing panels in the nose maybe
I have a question how do you fix it when your plane keeps wobbling at high speeds
wing panels in nose and strakes for roll wobble
@@pro_gemer k thanks
Question: where do i place conveyors on a non motor lock build.
Inside the plane or as the intakea
Whenever I tried to do anything with it, it has 2 problems. Number one is that it freezes for a small amount of time removing all of my velocity, no matter how hard I try to fix it. Number 2, I can't pull up enough even if I DO make it through without pausing. Any help?
First one might be bad latency, fps or physics lag
Number two add weight to the nose and balance it out with wing panels in the nose (or control surfaces if they give you enough directional drag)
@@pro_gemer Ah! good to know. I got traditional supermaneuverability in the way that i can flip on the spot, but can't pull any maneuvers. Tried adding weight, didn't help much. Another guy said to minimize wing panels to get better performance with maneuverability. Computer's kind of a beast, so the FPS probably isn't the case. Maybe just physics lag or latency?
@@pro_gemer hey, i just did it! thanks, but i can't do it sustainably as it still slows down too much and stutters. what settings did you use for your macro? i'm using logitech G hub with 50 ms delay between release of the keys and another 10 ms delay after key is up
@@gooberone i just make it press U, wait like 20 milliseconds and repeat
@@pro_gemer ah. doing cobras everywhere now, thanks!
Pro gemer do u have a jet that has a camo color little light black and white and a blue sky color?
I don't think I do
@@pro_gemer alr cus I saw someone copied my camo and the same jet as urs
@@4-seg-3-branch-spook could be my friend ha_rrier, his flanker was inspired by mine, it's in one of my vids
@@pro_gemeralr i still can't believe he got the same camo as my jet
Hi, I’m here to correct something.
Instead of using conveyors you can just use (small) propellers to achieve the cobra or super maneuverability that is.
Second, you can either use traditional thrust vector or use propeller guided maneuverability.
The thrust vectoring part is optional is might not be needed in most airframes (builds) but I recommend not to put the thrust vectoring part for maximum compatibility as it can be a little bit too much of a struggle or problem on other builds.
That is all, Thank you in advance if the creator of this video reads this.
P.S - I’m sorry if I have some mistakes in my correction.
Thank you!
The thing is, alot of propellers makes your game lag and doesn't achieve as good of an effect as conveyors, aswell as it's not nearly as smooth, powerful at high speeds as thrust vectoring
@@pro_gemeri agree since I AM 15 FPS
What speed for the conveyers and do i turn on toggle?
Settings dont matter, I just leave them on default but change either of the keybinds
@@pro_gemer thanks
this guide was really good btw it helped me alot
@@simplybutter1 ❤️❤️
prro gameer i got questions it donw work whit wedge conveyors?
Idk it works for me
i added weight and i press a button so my plane goes up and spammed conveyer but i cant do a cobra, it just bounces
Sorry for the late reply, try using a macro to spam the conveyor faster, possibly more weight could smooth it out
can i make the thrust vectoring mouse controlled?
Yeah go for it
What does the conveyer do in the build
It glitches the physics and increases the resistance to any change of velocity, though thats my observation and could be a bit wrong
thx i need this for my rocketship
I need tips on why i cant cobra. I am going at like 800 and i pull up and hit R conveyer k eybind a bunch and i cant cobra at all.
can you please describe the issue atleast?
When I go for a cobra i pull up and hit R my conveyer key bind a bunch and I just do a normal turn upwards. I don’t do a sharp turn and stay at altitude
@@patrickwelch365 note that your jet needs to be REALLY heavy, if you have a private server try putting the gravity slider all the way up and cobra? if that doesnt fix add some wing panels in the nose and balance it out with weight if too much
@@pro_gemer ok ill try with the gravity silder. and then ill add wing panels
@@pro_gemer holy adding wing panels fixed it in an instant! thanks
yoo can you help? i can do the cobra but it doesnt go for long, it just stops kinda when i do it.
more weight and less drag
@@pro_gemer how do I get rid of drag?
ITS HERE
can you make a tutorial on this plane or one that can cobra i cant seem to do this to my jet
This won't work on all planes, that's one quirk of plane crazy
Would be glad if you made a detailed description on what happens so I can actually help and no, I don't make tuts
why when i spam conveyor key it stop completly my airplane ?
my settings:
F
Speed:5
Untoggled
i dont know tbh, it happens to some people but i dont know why
if your plane has piston locking then that could be why
i cant get w s to work
I made a su27 with all of these parts and i still cant do cobra, i cant even lift up that good at speeds of 700 to 1k, idk what to do i was tryna add propellors for lift but it didnt work, what do i do?
Remove some weight, adding propellers for lift actually should work, dunno why it doesn't
@@pro_gemer I replaced some stuff and did what you told me to and it worked! but now its super suprr manouverable
@@orcbaner ayyy
the problem on my SU-25 is that when i try to add weight it wont pull up anymore and when i try making it less its wont cobra. Can anyone help?
Its probably an issue with the balance, does its nose by any chance go down while flying straight? If yes then put some weight into the back :]
@@pro_gemer nah it just straight up drags on the ground not being able to take off
@@pro_gemer i fixed it now but its doing backflips LOL maybe too much speed??
@@pro_gemer so i did some changes and the new problem is is that i cant pull up anymore for the cobra. ive tried to change some weight on the front but then it wont cobra can you help?
@@Tree.... well that sounds like a balancing issue, though for some aircraft conveyors cause elevators not to work i think, i dont know the fix for it
here is my general guide for balancing
-fly up and lower engines to 0 while in leveled flight
after that try flying straight at decent speed
-if the plane pitches while falling your centers of drag and mass are away from each other, add ballast to the side that goes up (either tail or nose)
-if the plane falls down without any rotation but pitches down while flying straight its an issue with your center of thrust, move your engines lower or do opposite if the problem is in reverse
One question, how much speed do I put on the conveyor?
Doesn't matter
when i spam the conveyor it just makes my SU-27 stop
I don't know what causes that bug but you can try the solutions in the pinned comment, they might or might not work
Is this tut jet so I can do it?
What’s the settings for the conveyors and what’s the speed for it
Speed doesn't matter, set either backwards or forwards (doesn't matter) to any keybind that is easy for you to spam
what does the conveyors do exactly
Keep your moving vector, the faster the less affect the new move vector has on the one that conveyor makes
HES THE CHOSEN ONE
how do we get the macro/ can we get a tutorial on that?
Well you can either use your mouse/keyboard drivers to make one or learn very basic auto hotkey
Thank you for the response!
@@phlyinducky_pfd456 sorry it took me so long, youtube didnt notify :/
does he mean like litteraly anywhere attatched to the aircraft?
if you are talking about the conveyors, yes they can be anywhere with any orientation
@@pro_gemer thanks
Yo whats the name of the last song?
blue archive theme 109
i dont know if anyone asked you this but can you make a tutorial on that jet youre useing in the video
What's the main keybind and the setting?
I use u with a macro, settings don't change anything
what do i do to solve this? it does the manuver but it recovers way too quickly, how do i fix this?
remove a bit of ballast, maybe decrease the angle of your elevators by a bit
@@pro_gemer what do you mean remove a bit of ballast? get rid of the blocks or decrease their weight?
@@funniaxlortlman1 whatever works