Dude that gun is sweet!! My friend ordered the something as soon as the Crown chassis was out and he loves it!! He only got the shorty though. Great vid!!
I played with the reg and hammer in the 380 barrel and found a little more reg pressure and less hammer did the trick for accuracy improvement. Listen for the snap when it gets loud the accuracy goes south. This was in 22. 18 gr jsb;s at 865 fps. I run the same reg pressure and hammer for 30 cal 44 gr and the 22 18s. Power wheel on max for 30 and 2 for the 22. Reg is 145. The 30 barrel is 600mm Superb back yard gun. Easy to lean up against anything and shoot. And as you said off the bench. You just smile all the time.
It’s amazing how accurate the 380 barrel is. So much I have one on both my 1st gen Crowns 1 22 and the other 25. Both run 150 on the regs and I just turn the power wheel down to keep whatever I’m using just under 900 fps. My poor Wildcat doesn’t see much use anymore. You can’t go wrong shopping at Utah they always treat me right. I just wanted to see the fps your getting with the newer gun. Since the plenum is a little bigger than mine are.
@airriflehunter87 LEE- Thanks for the comment man! I truly appreciate when some one takes the time to say something! Stay tuned for more Crown tuning, accuracy test, and prarie dog shooting!
You are one of the FEW who use a Labrador when doing tests.Would still like to see the FPE at POI especially when comparing slugs and pellets Labrador gives you that 9am Subscribed,Liking and Recomending your channel. Keep up the GOOD WORK TOM
@Tbuggey- I’m sorry I didn’t list it! I recorded that video the day I got the gun and kinda rushed the editing! I will be making a longer video on that gun and I’ll make it a point to list the labradar stats! Thanks for the support!
@Donald Lundy- Thanks man! I was tinkering with the 700mm barrel today and I was able to get the JSB MK2 heavies to shoot at 967fps and they are grouping great! Next will be a slug tune and then the pest control will begin! Thanks for commenting!
@Chris Figueroa- Thanks man, the gun is accurate for sure but it’s heavy! Definitely a bench gun! It weighs a little over 13 lbs with that scope! Thanks for leaving a comment!
@Stedy One- Thanks man! I always try to get the rifle to shoot what I want 😂 sometimes it takes lots of ammo! And In the end if I can’t get it to group, I’ll either get rid of the rifle or use what it groups best! Thanks for commenting man!
Sorry for the late reply but the video didnt show up as soon as you released it... But on the whole i love the look of the chassis. On a grouping stand point do you weigh and sort your pelllets as a few grains difference has a lot more effect down range. I know head and skirt size also play a part but at the higher velocity the skirt will flare out to match the barrel but there is no room for head manipulation
@duffmanmark- No worries man! I also like to gun but it is heavy! I weighed it the other day and it’s 6 kg! The scope weights a lot though and I will be switching it up. I didn’t sort the pellets, that was straight out of the tin. I might sort them when I go for 100 yard groups with the 700mm barrel. Thanks for commenting man, I appreciate it!
Need some help here! If you don’t mind… the included moderator makes mine inaccurate… shoots from left to right and down, and keeps doing so… but once I shoot without it; stacks pellets at 30m. What’s going on here?? And why does the moderator change the POI??
@AirgunnerCA-There are 2 reasons, first is that any thing that touches the barrel has an impact on the harmonics. It changes the vibrations that the barrel has when the shot goes off and that plays a role in accuracy and consistency. Second, the moderator influences the sir as the projectile leaves the barrel. Some times it does not do the job of clearing the air away from the projectile and can destabilize it. Experimenting with aftermarket moderators will show that some work better than other for stripping the air away from the projectile so it doesn’t impact the accuracy hope that helps man! Good luck
@@dangolwinner right on bro! It all makes sense now. I’m going to see if I can get a replacement, it barks without the moderator, and to have spent this much money on something that’s faulty is unacceptable…. If that still doesn’t do the job then I’ll look into an after market one. One more thing if you don’t mind… what’s with my cocking lever? It was smooth like butter for the first 30 shots but now it seems to be a 2nd stage one lol I have to give it a small yank towards the end to fully cock it… feels kind of like something is rubbing against it…
@AirgunnerCA- it could need a bit of cleaning where the pellet probe is. If you take off the power wheel, the spring and spring seat will come out. You can clean that area and apply a small amount of oil to lube everything back up. You can also add a small amount of lube on the silver push rod that’s connected to the cocking arm where I goes into the main block towards where the cheek piece is.
Another dilemma here if you don’t mind me asking for some help… So I finally got my fx pocket radar and wanted to see what my velocities were like with the 380 and 700mm barrel using the king heavies and the MK2s. So I’m getting an average of 863 with the kings and 770 with the MK2s with the short barrel. Long barrel 970 with the king heavies, 833 with the MK2…. All of this with the stock settings max on hammer, high on the transfer port end 145 BAR. Any way to get those numbers up? Just the MK2 but I do plan on shooting slugs later on with the heavy slug liner I got. 830ish seems very low when you consider slugs can be a bit heavier
@AirgunnerCA- You will need to add the slug power kit. That will boost the power up quite a bit and allow you to up your reg pressure. You can also add the Huma transfer port, that will give you a boost as well. My mk2 with those parts I mentioned will shoot the 34 gr mk2 heavies at 1090fps.
@AirgunnerCA- You can run your reg pressure up to 150-160 bar and then max out your hammer pretension. That would put you into the 900fps+ with the 700mm barrel
@Neil Ardison- the total package with the rifle, ATN scope, IR light, and range finder is 13.2 pounds! The scope is pretty heavy. When I swap scopes in a few days I’ll post that weight in that video too
Sweet, I’m a little over two weeks in on my wait so hopefully soon. My first high end air gun so I went ahead and had them do the tuning for hybrids. Hopefully it shoots them really good at a decent velocity.
@matt- Awesome! It’s a lot of fun to shoot something so accurate! It will definitely make you a better shooter. Let me know how it turns out when you get it! I always pay attention to the comments, even if it’s months later I’ll get it.
Nice but i cant understand how u get 900+fps with that 380mm barrel i just got mine crown mk2 in 22cal and the max speed i get is 850fps (18.13jsb) i have tryed all settings and reg presure if i put the reg on 150like you i get 750fps if i have the reg on 120bar and all other settings on max i get 850fps If i use the 600mm barrel i get 950+fps i even got the same newer transfer port on mine.
@AirgunnerCA- The main difference is the speeds you can potentially achieve. You can get either barrel to shoot ragged hole groups with pellets at 50 yards all day, but the longer barrel will allow you to shoot at a much lower reg pressure. That will lead to more shots per fill. If your looking for the best possible groups at 100 yards, the 700mm barrel will edge out the 380mm barrel, but that being said you can get great accuracy still with the short barrel. The difference in speed between the 2 is about 130 FPS using the same tune and only swapping barrels.
@@dangolwinner thank you! I’m planning on getting the crown, as soon as they’re back in stock, and want to make the right purchase. But it seems like the only available barrels are 50p or 600mm… is the 700mm an after purchase?
@AirgunnerCA The 700mm barrel comes with the Crown Continuum package. It included both the 380 and 700mm barrels. It’s a good deal if it’s in your price range!
@Yves Thomas- With the 380 compact barrel, not quite. I have it setup right now with the reg at 150 bar, the hammer pretension at max, and transfer port wheel on high and with the Hades it’s shooting them at 910fps. I haven’t shot the heavies on this current tune yet. With the longer barrel definitely! I put the 700 mm barrel on there with those setting and it’s pushing the Mk2 heavies at 970fps. When I get the chance today to tomorrow I’ll shoot the heavies out of the compact barrel and get back to you about what speed it’s pushing them at.
@@dangolwinner Ok thanks, I suppose it has also no problems to get 885 mps with the 600mm barrel? When I maybe buy a Crown, I slightly prefere the 600mm barrel for more stability ;-)
To have a 700mm barrel at 50 yards is very bad bad bad that group friend, nothing to impress me, my warpcobra Rifle makes a better group at 100 meters with a 55mm barrel you can see the videos on my Instagram account @airgunplusrd1
![[Live] : ONE 168 วันนี้!! "โจนาธาน vs ซุปเปอร์เล็ก"](http://i.ytimg.com/vi/0jIN65KgJsI/mqdefault.jpg)
Liked your gun so much I have just fitted the chassis, grip and 380 barrel to my Crown, 👍
Lovely set up dang, love the 380 barrel very accurate. Good stuff 🇬🇧
@Sub Twelvefoot- Thanks bud! I’ll be using that setup with the JSB Hades in a few days for prarie dogs!
Dude that gun is sweet!! My friend ordered the something as soon as the Crown chassis was out and he loves it!! He only got the shorty though. Great vid!!
@Billy Hellbender Outdoors- Thanks for commenting man! The gun is an awesome bench gun. It is heavy though!
I played with the reg and hammer in the 380 barrel and found a little more reg pressure and less hammer did the trick for accuracy improvement. Listen for the snap when it gets loud the accuracy goes south. This was in 22. 18 gr jsb;s at 865 fps. I run the same reg pressure and hammer for 30 cal 44 gr and the 22 18s. Power wheel on max for 30 and 2 for the 22. Reg is 145. The 30 barrel is 600mm Superb back yard gun. Easy to lean up against anything and shoot. And as you said off the bench. You just smile all the time.
It’s amazing how accurate the 380 barrel is. So much I have one on both my 1st gen Crowns 1 22 and the other 25. Both run 150 on the regs and I just turn the power wheel down to keep whatever I’m using just under 900 fps. My poor Wildcat doesn’t see much use anymore.
You can’t go wrong shopping at Utah they always treat me right.
I just wanted to see the fps your getting with the newer gun. Since the plenum is a little bigger than mine are.
Another great informative video , always spot on and a nice guy too chat too. Good work man 😎
@airriflehunter87 LEE- Thanks for the comment man! I truly appreciate when some one takes the time to say something! Stay tuned for more Crown tuning, accuracy test, and prarie dog shooting!
Pretty setup Daniel. Looks like she wants to do nothing but stack em too! Nice video pard.
@Bret Lawson- Thanks Bret! It is a nice piece of equipment! I’m excited to see what kind of long range performance I can get out of it
You are one of the FEW who use a Labrador when doing tests.Would still like to see the FPE at POI especially when comparing slugs and pellets Labrador gives you that
9am Subscribed,Liking and Recomending your channel. Keep up the GOOD WORK TOM
@Tbuggey- I’m sorry I didn’t list it! I recorded that video the day I got the gun and kinda rushed the editing! I will be making a longer video on that gun and I’ll make it a point to list the labradar stats! Thanks for the support!
@@dangolwinner Thanks you are setting a STANDARD for this type of report TOM
Very nice setup and very accurate shooting. Definitely a Prairie dog shooter
@Donald Lundy- Thanks man! I was tinkering with the 700mm barrel today and I was able to get the JSB MK2 heavies to shoot at 967fps and they are grouping great! Next will be a slug tune and then the pest control will begin! Thanks for commenting!
Awesome video brother 👍 what a very accurate gun also very tactical looking as well nice set up thanks for sharing bsafe
@Chris Figueroa- Thanks man, the gun is accurate for sure but it’s heavy! Definitely a bench gun! It weighs a little over 13 lbs with that scope! Thanks for leaving a comment!
@@dangolwinner awesome gun bro congrats ... lots of power and versatile air gun
A very good review, thanks.
@Phillip Robinson- Thanks! I appreciate the comment!
Nice rifle.
No matter how many pellets I try the rifle decides which one it likes. LOL
@Stedy One- Thanks man! I always try to get the rifle to shoot what I want 😂 sometimes it takes lots of ammo! And In the end if I can’t get it to group, I’ll either get rid of the rifle or use what it groups best! Thanks for commenting man!
Sorry for the late reply but the video didnt show up as soon as you released it... But on the whole i love the look of the chassis. On a grouping stand point do you weigh and sort your pelllets as a few grains difference has a lot more effect down range. I know head and skirt size also play a part but at the higher velocity the skirt will flare out to match the barrel but there is no room for head manipulation
@duffmanmark- No worries man! I also like to gun but it is heavy! I weighed it the other day and it’s 6 kg! The scope weights a lot though and I will be switching it up. I didn’t sort the pellets, that was straight out of the tin. I might sort them when I go for 100 yard groups with the 700mm barrel. Thanks for commenting man, I appreciate it!
Pretty sweet rig you got, but if you're gonna get a coyote with that 25 cal you better have hollow point slugs and a very clear head shot.
@ BigfootDude- Thanks man, the shot on a coyote at the house would be 25-40 yards max!
@@dangolwinner cool beans, it would be awesome to see a video of that if you ever get the chance.
did you clean the barrel before you started?
Need some help here! If you don’t mind… the included moderator makes mine inaccurate… shoots from left to right and down, and keeps doing so… but once I shoot without it; stacks pellets at 30m. What’s going on here?? And why does the moderator change the POI??
@AirgunnerCA-There are 2 reasons, first is that any thing that touches the barrel has an impact on the harmonics. It changes the vibrations that the barrel has when the shot goes off and that plays a role in accuracy and consistency. Second, the moderator influences the sir as the projectile leaves the barrel. Some times it does not do the job of clearing the air away from the projectile and can destabilize it. Experimenting with aftermarket moderators will show that some work better than other for stripping the air away from the projectile so it doesn’t impact the accuracy hope that helps man! Good luck
@@dangolwinner right on bro! It all makes sense now. I’m going to see if I can get a replacement, it barks without the moderator, and to have spent this much money on something that’s faulty is unacceptable…. If that still doesn’t do the job then I’ll look into an after market one. One more thing if you don’t mind… what’s with my cocking lever? It was smooth like butter for the first 30 shots but now it seems to be a 2nd stage one lol I have to give it a small yank towards the end to fully cock it… feels kind of like something is rubbing against it…
@AirgunnerCA- it could need a bit of cleaning where the pellet probe is. If you take off the power wheel, the spring and spring seat will come out. You can clean that area and apply a small amount of oil to lube everything back up. You can also add a small amount of lube on the silver push rod that’s connected to the cocking arm where I goes into the main block towards where the cheek piece is.
@@dangolwinner I can’t thank you enough of how much help you’ve been bro! 👍 really appreciate it!
@AirgunnerCA- No worries man! I’m always willing to help 👍🏻
Another dilemma here if you don’t mind me asking for some help… So I finally got my fx pocket radar and wanted to see what my velocities were like with the 380 and 700mm barrel using the king heavies and the MK2s. So I’m getting an average of 863 with the kings and 770 with the MK2s with the short barrel. Long barrel 970 with the king heavies, 833 with the MK2…. All of this with the stock settings max on hammer, high on the transfer port end 145 BAR. Any way to get those numbers up? Just the MK2 but I do plan on shooting slugs later on with the heavy slug liner I got. 830ish seems very low when you consider slugs can be a bit heavier
@AirgunnerCA- You will need to add the slug power kit. That will boost the power up quite a bit and allow you to up your reg pressure. You can also add the Huma transfer port, that will give you a boost as well. My mk2 with those parts I mentioned will shoot the 34 gr mk2 heavies at 1090fps.
@@dangolwinner I’ll definitely be looking into that! As for stock parts, anything i can do to bump up those 34gr into high 800s?
@AirgunnerCA- I forgot to mention that speed was with my Impact! You have the Crown MK2 right?
@@dangolwinner yes the .25 continuum
@AirgunnerCA- You can run your reg pressure up to 150-160 bar and then max out your hammer pretension. That would put you into the 900fps+ with the 700mm barrel
Nice looking rig. How much does it weigh? Thanks
@Neil Ardison- the total package with the rifle, ATN scope, IR light, and range finder is 13.2 pounds! The scope is pretty heavy. When I swap scopes in a few days I’ll post that weight in that video too
Waiting on my crown from Utah Airguns as well. When did you order if you don’t mind me asking?
@matt- Nice! Except the waiting part! I hate the long wait for a gun! It took mine a few days short of 3 weeks to get it once I ordered it
Sweet, I’m a little over two weeks in on my wait so hopefully soon. My first high end air gun so I went ahead and had them do the tuning for hybrids. Hopefully it shoots them really good at a decent velocity.
@matt- Great choice man! Your gonna like it! It’s grouped everything I’ve put through it so far. What model did you get?
The mk2 in the chassis. Main idea was use it for a trainer type rifle in the backyard with components for reloading being non existent
@matt- Awesome! It’s a lot of fun to shoot something so accurate! It will definitely make you a better shooter. Let me know how it turns out when you get it! I always pay attention to the comments, even if it’s months later I’ll get it.
Hello, I am interested in this product, can you give me the address to purchase?
Look forward to your answer
thanks
@thuyen bui- Sure thing! Email me at dang77lopez@gmail.com and I’ll get you the info!
Nice but i cant understand how u get 900+fps with that 380mm barrel i just got mine crown mk2 in 22cal and the max speed i get is 850fps (18.13jsb) i have tryed all settings and reg presure if i put the reg on 150like you i get 750fps if i have the reg on 120bar and all other settings on max i get 850fps
If i use the 600mm barrel i get 950+fps i even got the same newer transfer port on mine.
@Niklas N- Did you adjust the hammer pretension? You have to remove the stock and use an Alan key to adjust the pretension for the hammer spring.
@@dangolwinner thx i will try that
What’s the difference between the 300mm or 700mm barrel, other than compact versatility?
@AirgunnerCA- The main difference is the speeds you can potentially achieve. You can get either barrel to shoot ragged hole groups with pellets at 50 yards all day, but the longer barrel will allow you to shoot at a much lower reg pressure. That will lead to more shots per fill. If your looking for the best possible groups at 100 yards, the 700mm barrel will edge out the 380mm barrel, but that being said you can get great accuracy still with the short barrel. The difference in speed between the 2 is about 130 FPS using the same tune and only swapping barrels.
@@dangolwinner thank you! I’m planning on getting the crown, as soon as they’re back in stock, and want to make the right purchase. But it seems like the only available barrels are 50p or 600mm… is the 700mm an after purchase?
500*
@AirgunnerCA The 700mm barrel comes with the Crown Continuum package. It included both the 380 and 700mm barrels. It’s a good deal if it’s in your price range!
@@dangolwinner thank for all your help! Ordered the green laminate stock continuum in .25, should be here by next Friday 👍
Is it possible to do 885 fps with the King Heavy'sat your setting?
@Yves Thomas- With the 380 compact barrel, not quite. I have it setup right now with the reg at 150 bar, the hammer pretension at max, and transfer port wheel on high and with the Hades it’s shooting them at 910fps. I haven’t shot the heavies on this current tune yet. With the longer barrel definitely! I put the 700 mm barrel on there with those setting and it’s pushing the Mk2 heavies at 970fps. When I get the chance today to tomorrow I’ll shoot the heavies out of the compact barrel and get back to you about what speed it’s pushing them at.
@@dangolwinner Ok thanks, I suppose it has also no problems to get 885 mps with the 600mm barrel? When I maybe buy a Crown, I slightly prefere the 600mm barrel for more stability ;-)
@Yves Thomas- Yes I am sure you can achieve that speed with a 600mm barre! And that would be a little easier to handle in the field
I have a crown mk2 with a 600mm superior liner in .25 at 140 reg it shoots the heavys at 880 to 870 its a laser beam . Stock gun also
To have a 700mm barrel at 50 yards is very bad bad bad that group friend, nothing to impress me, my warpcobra Rifle makes a better group at 100 meters with a 55mm barrel you can see the videos on my Instagram account @airgunplusrd1