IS-IS Mikrotik Full Lab (Step by Step) - Ep 2
ฝัง
- เผยแพร่เมื่อ 1 ต.ค. 2024
- #isis #routingMikrotik #routeros7
NOTE - IS-IS is available on RouterOS v7.13beta1+
Ep 2 IS-IS
We will configure IS-IS on six Mikrotik routers. We will use L1 and L2 routing to get full IP connectivity.
Check more videos on my channel
/ @thenetworktrip
Connect with Wilmer Almazan
LinkedIN: / wilmeralmazan
Facebook: / nsswilmeralmazan
Twitter: / wilmer_almazan
Instagram: / wilmer_almazan
Personal Blog: thenetworktrip...
mikrotik
routeros 7
ospf
mtcna
mtcre
cybersecurity
routing
cloud computing
virtualization
switching
network automation
![IS-IS Protocol on Mikrotik - MIKROTIK TUTORIAL [ENG SUB]](/img/n.gif)
Have you had the opportunity to work with IS-IS routing in your lab / network configurations? If so, what challenges or successes have you encountered? Share your insights and questions with us in the comments! 👇
If you added another area next to Area 49.0003, would you have to expand the backbone to R4 ether 1 L2?
Hello!
That's correct. R4 and R4 would need ether2 and ether1 as L1/L2 interface respectively.
Okay I understand. Thank you for the reply.
Hello,
I hope this message finds you well.
We are currently working on transmitting live video using Wi-Fi communication for our project. Our setup includes a MikroTik Groove configured in station mode, a TP-Link CPE 220 in Access Point mode, and a Raspberry Pi HQ camera. While we have successfully streamed live video using the RTSP protocol, we are experiencing a significant delay of approximately 2 seconds, which is problematic for our application involving drone use.
To address this delay, we plan to switch to the UDP protocol for streaming. However, we have encountered an issue when using VLC Media Player to view the live stream over UDP. The video does not appear on the screen; only the time information is displayed in the bottom left corner, as illustrated in the attached picture. This issue also occurred when we increased the video quality while broadcasting with RTSP.
Could you please provide any insights or solutions to resolve this issue? Any guidance or recommendations would be greatly appreciated.
Thank you for your assistance.
Best regards,
It is so good to come across a TH-cam channel with high quality (and very much up-to-date too, like this one) material on MikroTik. It really shows how much he understands the fundamentals. Well done. I instantly subcribed for more.
Now we just need SPB
Hopefully soon
your channel is awesome, thank you for sharing knowledge dude. Keep it up.
Thanks, will do!
Thanks for the tutorial on how to configure IS-IS on Mktk! How are the maximum areas we can configure? And the link between R-1 R-5 and R-2 R-3 can be a WAN connection in different (and separated) locations?
Thank you!
The physical connection between the routers can be in separate locations. There are no restrictions regarding the number of areas, and we don't have a backbone area like OSPF. The backbone consists of a chain of L2 routers.
IS-IS is a flexible routing protocol that allows for the creation of multiple areas, and there is no hard limit on the number of areas you can define within an IS-IS network. The number of areas you choose to implement will depend on your network's specific design and requirements.
does is-is have cost feature, if yes then where is that ?
Hello!
As shown in Ep.1, it’s under the interface-template.
I will present more advanced setups in future videos. This one is merely a warm-up👌
@@TheNetworkTrip You are really good network professional, you were able to demystify the OSPF protocol on your other video
first IS-IS lab in mkrotik on youtube . thanks for the presentation
you're right! First IS-IS mikrotik video ever...😃