Simulation of spiral inductor using hfss

[@manujsingh9840]

Hey, Thanks a lot for helping us with the above simulation. Can you please let me know how we could find the series resistance and the self capacitance of the inductor

[@Twinprediction]

super sister

[@MehdiZareiTazehkand]

Thanks. One point, for the reactance, shouldn't we write im(1/Y(1,1)) instead of 1/im(Y(1,1))?

[@nanliu9355]

Very detailed, Can you share the model？

[@kyungtaekim217]

Thanks. It helped a lot.

[@BECSachinAravinthK]

yes

[@kmosmangoni1602]

Hello, which version use here?

[@sonuvishwakarma8236]

Can you give the expression for "Quality Factor" to be used for simulating inductor design?

[@BECSachinAravinthK]

The quality factor (or Q) of an inductor is the ratio of its inductive reactance to its resistance at a given frequency, and is a measure of its efficiency. The higher the Q factor of the inductor, the closer it approaches the behavior of an ideal inductor

[@bisoncom5139]

Y11 = 1/(jwL) when port 2 is shorted. So L = -1/Im(Y)/w/f

[@zaidinajah8741]

Hi, it's possible to Simulate a MIM Capacitor by this way?

[@Twinprediction]

yes use maxwell

[@BECSachinAravinthK]

use maxwell, then do search parallel plate capacitor in " Hfss Maxwell"

[@abhishekkumar-gj4nz]

I want to design planar circular spiral inductor on Fr4 sustrate with inductance 1uH. Is it possible to design following the steps shown in this video??.... how to add substrate or PCB material in it?? please help.....

[@raziasulthana7630]

I added substrate in this vedio you can see at the starting.. If you want FR4 as substrate you should assign the material as FR4. I dont think we can make inductance of value 1uH in this manner.