I liked this video quite a lot. I had no clue such a little (yet complete) sensor existed. And it's also very cheap. I bought it from your link... I hope you get a few cents from it.
Hey Nicola, thank you very much for the comment! This is a great little sensor! Thanks for supporting the channel by using the affiliate links. I really appreciate! Cheers
I plan on using it along with a "snow/ raindrop detection sensor module and a capacitive soil moisture sensor (as backup) and a radio transmitter to send the data from outside to inside my house if I can get it all on an ATTiny. Otherwise I'll most likely use an ESP32 and use the on board bluetooth or wifi, and add a lux sensor. Then 3D print a case for it. ;-)
I am doing the same, but there's some problem seeing the result in the serial monitor.It's not showing the result...what are the changes to be done to see result in serial monitor.
You beat me to it. I'm pretty much in the process of making the same thing you're making but instead I'm adding a ds3231, am going to log data like (Max temp, Min temp ect) on its eeprom and the processor is an 8051
I love your videos. However, I have been having trouble getting my BME280 to work, so I decided to buy the parts that you listed for your project and try to follow it as is without deviation. Since I already had 3 of the sensors I did not buy any more. Sadly mine is not 5V tolerant, so I planned to use a logic level shifter. Nevertheless, before I ever got that far I realized that there was not enough power to run both the mega and the screen at the same time. I tried first hooking it up to my raspberry pi 3B+ with a 2.5 amp power supply and then on my regular computer. Neither would make the screen light up. I thought it might be the screen so I tried putting it on my Uno and it lights up. Then I thought I might have a bad mega but it will run the blink program without the screen attached. I noticed that the screen hat does not use the scl or sda pins, so I do not know how I could do the project with the Uno. any ideas how I can get more power to the mega, or any other ideas?
Thanks for this Contribution. You asked for projects wit BME 280. I use many BME280 together with WeMos ESP8266. Plase pay attention using the adafruit library. By a self heating effect it will lead to a temperature error. Temperature will be measured too high. It is much better to use the github.com/embeddedadventures/BME280 allowing the parameters recommended in the BOSCH data sheet. I published some measurements and comparisions here: homematic-forum.de/forum/viewtopic.php?p=324372#p324372 even this is in German language you will see the diagrams and google may help to translate. For the quality of humidity measurements see www.kandrsmith.org/RJS/Misc/Hygrometers/calib_many.html The pressure sensor is also very precise. I used it to build a pneumatic inventory gauge (level measurement) for a stationary fuel oil tank. you can read it there: homematic-forum.de/forum/viewtopic.php?p=328133#p328133 homematic-forum.de/forum/viewtopic.php?p=328152#p328152
Hi this is my first project I am 8 years old. It was good to have the project work the first time I tryed it. But I was wondering if there is any way to display the Barometer in Inhg like 30.01 insisted of hpa?
Thank you for sharing this project. When compiling the program code, I received the following error message: libraries\Adafruit_Sensor-master\Adafruit_Sensor.cpp.o (symbol from plugin): In function `Adafruit_Sensor::printSensorDetails()': (.text+0x0): multiple definition of `Adafruit_Sensor::printSensorDetails()' sketch\Adafruit_Sensor.cpp.o (symbol from plugin):(.text+0x0): first defined here c:/users/beto/appdata/local/arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/bin/../lib/gcc/avr/7.3.0/../../../../avr/bin/ld.exe: Disabling relaxation: it will not work with multiple definitions collect2.exe: error: ld returned 1 exit status exit status 1 Erreur de compilation pour la carte Arduino Mega or Mega 2560 Thanks for any help!
Ryan Thanks for your comment. I am completely new to electronics but after some study I am hoping to put together this same project with Nokia 5110 LCD screen and a Nano. The Nano is smaller and the 5110 LCD can be read in day light. I am a bit worried that I have bitten of more than I can chew.
+Hutzpahh no that should be relatively simple. I'm currently trying to do the same thing with a arduino nano, bme280 sensor and displayed on a 1.3 oled for the purpose of having live field data from the crop field on my farm. biggest challenge so far is finding the correct libraries and code references for the specific display (LCDs, oleds, etc, all seem to use different libraries and coding. the rest is easy!
Hi! My name is Benedito and i am meteorologist. First my congratulations by excellent work. This weather station project is great! But i have a question. How i do to save the meteorological informations in the .txt or .dat format? It exist a computer program that execute this record process? I have another question. What is cost of the all components these project in dollar? This project is very good. It have infinity applications, mainly in education high school. Thanks!
Dear Benedito thank you very much for your comment. I have prepared some video about saving data in an SD card. Here they are: th-cam.com/video/XAxv0fr26_8/w-d-xo.html th-cam.com/video/oei3Y6tOhVI/w-d-xo.html The cost of the project is around 20$. Since you are a meteorologist I would love to have a small talk with you. I need your help on someting!
Τέλειο βίντεο. Μήπως θα μπορούσες να κάνεις ένα βίντεο για το πώς να συνδέσεις ένα Micro SD module στους μετεορολογικους σταθμούς? Ευχαριστώ. Συνέχισε την καλή δουλειά!!!
bonjour comment modifier le code pour avoir bme 280 ( intérieur extérieur ) et carte sd merci hello how to modify the code to have bme 280 (intdoor outdoor) and sd card thank you
Thanks for these details, I would like to know how to send some infos captured to puredata ? Maybe via udp ? Or if there exist other better choices ? Thank you !
Νίκο έχεις κάνει και κάνεις καταπληκτική "εκπαιδευτική" δουλειά. Έχω ανεβάσει εδώ www.hlektronika.gr/forum/showthread.php?t=88190&p=800570&viewfull=1#post800570 μερικά link απο την δουλειά σου!!! Η προσφορά σου στην εκπαίδευση της πλατφόρμας του Arduino είναι πολύ αξιόλογη. Συγχαρητήρια.
Nick, you can look at my recent video what can be done with ESP8266 and cheap LCD - Arduino Uno Shield type. Total price of my Internet Weather Station is about $10. It's time to switch to ESP8266 and STM32 world.
Γεια σου φίλε, ναι όντως αυτό είναι ένα εύκολο project αλλά μην ξεχνάς το κανάλι το παρακολουθούν και άτομα που τώρα ξεκινούν με το Arduino, οπότε πιστεύω ότι καλό είναι να φτιάχνουμε και κανένα εύκολο project που και που.
Great introduction of the new BME280 sensor...
I liked this video quite a lot. I had no clue such a little (yet complete) sensor existed. And it's also very cheap. I bought it from your link... I hope you get a few cents from it.
Hey Nicola, thank you very much for the comment! This is a great little sensor! Thanks for supporting the channel by using the affiliate links. I really appreciate! Cheers
Thank you! Your video helped me launch the BME280 sensor
I am glad that the video helped you. Cheers!
Mine couldn't launch the BME280 sensor. I keep getting error messages. How did you do it?
I'm planning on using this sensor in a humidity logger/watchdog for my mobile home.
I plan on using it along with a "snow/ raindrop detection sensor module and a capacitive soil moisture sensor (as backup) and a radio transmitter to send the data from outside to inside my house if I can get it all on an ATTiny. Otherwise I'll most likely use an ESP32 and use the on board bluetooth or wifi, and add a lux sensor. Then 3D print a case for it. ;-)
Hi,
Thanks for the info, I did everything the video said and after the upload nothing happens. anyway to debug?
I am doing the same, but there's some problem seeing the result in the serial monitor.It's not showing the result...what are the changes to be done to see result in serial monitor.
How can i do the same Weatherstation but with an 1.77 ´´ TFT display ?
Very good project. Can you make wheater station with DHT11, DS1820 x 2, BMP180, OLED display, and web page?
You beat me to it. I'm pretty much in the process of making the same thing you're making but instead I'm adding a ds3231, am going to log data like (Max temp, Min temp ect) on its eeprom and the processor is an 8051
I love your videos. However, I have been having trouble getting my BME280 to work, so I decided to buy the parts that you listed for your project and try to follow it as is without deviation. Since I already had 3 of the sensors I did not buy any more. Sadly mine is not 5V tolerant, so I planned to use a logic level shifter. Nevertheless, before I ever got that far I realized that there was not enough power to run both the mega and the screen at the same time. I tried first hooking it up to my raspberry pi 3B+ with a 2.5 amp power supply and then on my regular computer. Neither would make the screen light up. I thought it might be the screen so I tried putting it on my Uno and it lights up. Then I thought I might have a bad mega but it will run the blink program without the screen attached. I noticed that the screen hat does not use the scl or sda pins, so I do not know how I could do the project with the Uno. any ideas how I can get more power to the mega, or any other ideas?
Thanks for this Contribution.
You asked for projects wit BME 280. I use many BME280 together with WeMos ESP8266. Plase pay attention using the adafruit library. By a self heating effect it will lead to a temperature error. Temperature will be measured too high. It is much better to use the github.com/embeddedadventures/BME280 allowing the parameters recommended in the BOSCH data sheet.
I published some measurements and comparisions here: homematic-forum.de/forum/viewtopic.php?p=324372#p324372 even this is in German language you will see the diagrams and google may help to translate.
For the quality of humidity measurements see www.kandrsmith.org/RJS/Misc/Hygrometers/calib_many.html
The pressure sensor is also very precise. I used it to build a pneumatic inventory gauge (level measurement) for a stationary fuel oil tank. you can read it there: homematic-forum.de/forum/viewtopic.php?p=328133#p328133
homematic-forum.de/forum/viewtopic.php?p=328152#p328152
Ah, thanks! I've always had temperature problems with my BME280. Otherwise it's a very nice module.
Thank you very much for sharing your experience with the community!
Hi this is my first project I am 8 years old. It was good to have the project work the first time I tryed it. But I was wondering if there is any way to display the Barometer in Inhg like 30.01 insisted of hpa?
Hi nick, would you please to create comparison of the humidity and temperature sensor, which is the best sensor
Thank you
I will place on my rocket to calculate the altitude of the rocket. Thanks for the video.
This would be perfect for a chicken egg incubator.
Hi, great job, thanks.
Do you have CODE OF THE PROJECT for
Weather Station with a BME280 with a Nokia 5110 LCD Display.
I couldn't launch the BME280 sensor. I keep getting error messages. Could you help please?
how can i change from barometric pressure feet of latitude?
Can weuse this code for arduino uno?
Thank you for sharing this project. When compiling the program code, I received the following error message:
libraries\Adafruit_Sensor-master\Adafruit_Sensor.cpp.o (symbol from plugin): In function `Adafruit_Sensor::printSensorDetails()':
(.text+0x0): multiple definition of `Adafruit_Sensor::printSensorDetails()'
sketch\Adafruit_Sensor.cpp.o (symbol from plugin):(.text+0x0): first defined here
c:/users/beto/appdata/local/arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/bin/../lib/gcc/avr/7.3.0/../../../../avr/bin/ld.exe: Disabling relaxation: it will not work with multiple definitions
collect2.exe: error: ld returned 1 exit status
exit status 1
Erreur de compilation pour la carte Arduino Mega or Mega 2560
Thanks for any help!
can I use it for a mountain ride. ?
THIS IIIIIIS SPARTAAAAAAAAAAAA
it's with altitude sensor. ?
can you make this kind of sensor waterproof? so it can be places outside?
Sir you don't use return keyword?
In function get pressure and get humidity.
Can I use 6-pin BME280 module for this project? Is there any difference between the 4-pin and 6-pin sensor? Thank you!
I think the 6pin version uses the SPI interface
if you use a data logger you could see the weather in your computer
Do you have CODE OF THE PROJECT?
Hi Nick.
Can I use the GY-68 BMP180 with Digital Pressione Barometrica Sensor Module?
Thanks in advance
Yes, but the BMP180 does not offer humidity measurement
Is this device portable?
Would it give correct readings when hiking?
Thanks
Yes, the whole thing can be powered by a battery very easily.
Ryan Thanks for your comment. I am completely new to electronics but after some study I am hoping to put together this same project with Nokia 5110 LCD screen and a Nano. The Nano is smaller and the 5110 LCD can be read in day light. I am a bit worried that I have bitten of more than I can chew.
+Hutzpahh no that should be relatively simple. I'm currently trying to do the same thing with a arduino nano, bme280 sensor and displayed on a 1.3 oled for the purpose of having live field data from the crop field on my farm.
biggest challenge so far is finding the correct libraries and code references for the specific display (LCDs, oleds, etc, all seem to use different libraries and coding.
the rest is easy!
Hi, i have a quesion . Can the arduino uno be used instead of arduino mega?
Sure!
Hi! My name is Benedito and i am meteorologist. First my congratulations by excellent work. This weather station project is great! But i have a question. How i do to save the meteorological informations in the .txt or .dat format? It exist a computer program that execute this record process? I have another question. What is cost of the all components these project in dollar?
This project is very good. It have infinity applications, mainly in education high school.
Thanks!
Dear Benedito thank you very much for your comment. I have prepared some video about saving data in an SD card. Here they are: th-cam.com/video/XAxv0fr26_8/w-d-xo.html
th-cam.com/video/oei3Y6tOhVI/w-d-xo.html
The cost of the project is around 20$.
Since you are a meteorologist I would love to have a small talk with you. I need your help on someting!
I get error compiling code: "exit status 1 redefinition of float temperature".I am not a programmer any help appreciated.
I have been looking everywhere to find a sketch using a BME280 and a NRF24L01. Can you help?
Check my video about the NRF24L01. If you combine it with the code of this video you can a working project easily
Ok I will try to build a project with a BME280 and NRF24L01 in the future. Thanks for that, I will rename the file soon!
Τέλειο βίντεο. Μήπως θα μπορούσες να κάνεις ένα βίντεο για το πώς να συνδέσεις ένα Micro SD module στους μετεορολογικους σταθμούς? Ευχαριστώ. Συνέχισε την καλή δουλειά!!!
Γεια σου φίλε Μύρωνα,
Σε ευχαριστώ για τα καλά σου λόγια. Ναι μπορούμε να το κάνουμε αυτό, θα το προσπαθήσω σε κάποιο επόμενο βίντεο!
Will you make a video about interrupts?
Yes, that video is coming!
bonjour comment modifier le code pour avoir bme 280 ( intérieur extérieur ) et carte sd merci
hello how to modify the code to have bme 280 (intdoor outdoor) and sd card thank you
Thanks for these details, I would like to know how to send some infos captured to puredata ? Maybe via udp ? Or if there exist other better choices ? Thank you !
So, with Arduino UNO it should work perfectly fine right?
Yes, it just requires some soldering
educ8s.tv ok thanks I'll try to buy the sensors and an Arduino UNO myself, as I love weather stats. Thank you for your poryect
Thanks ,,,
i done this in the past with a standalone atmega chip on internal clock with DHT22 and the BMP.. a nokia lcd displays the data
Νίκο έχεις κάνει και κάνεις καταπληκτική "εκπαιδευτική" δουλειά. Έχω ανεβάσει εδώ www.hlektronika.gr/forum/showthread.php?t=88190&p=800570&viewfull=1#post800570 μερικά link απο την δουλειά σου!!! Η προσφορά σου στην εκπαίδευση της πλατφόρμας του Arduino είναι πολύ αξιόλογη. Συγχαρητήρια.
Ευχαριστώ πολύ Γιώργο για τα καλά σου λόγια! Σε ευχαριστώ και για την υποστήριξη!
Hi, thanks for the info. I am getting the following errors
compilation terminated.
exit status 1
Error compiling for board Arduino/Genuino Uno.
Nick, you can look at my recent video what can be done with ESP8266 and cheap LCD - Arduino Uno Shield type. Total price of my Internet Weather Station is about $10. It's time to switch to ESP8266 and STM32 world.
Very cool project! It looks great! Great stuff!
Thank you.
CAN U MAKE A VIDEO ABOUT A MENU USING LCD 16*2 LCD PLZ PLZ .......
My bme280 shows about 3 degrees Celsius too mutch. Anybody else there whith the same problem?
Make a weather station that is connected to the Internet so you can check it on your phone or laptop.
gj
yeah please micro sd data logging!!!!
I thought 5V would destroy the sensor...
The module I use has on an onboard regulator, so there is no such fear.
Ανέβασε λίγο το επίπεδο, αυτά πλέον είναι εύκολα και τα έχεις ξανά κάνει στο παρελθόν.. Φιλικά.
Γεια σου φίλε, ναι όντως αυτό είναι ένα εύκολο project αλλά μην ξεχνάς το κανάλι το παρακολουθούν και άτομα που τώρα ξεκινούν με το Arduino, οπότε πιστεύω ότι καλό είναι να φτιάχνουμε και κανένα εύκολο project που και που.