Hi. Thanks again for sharing, I tried to follow but I’m having serious trouble in mirroring anything, especially when I had to do the mirror of the three open lines to complete the bottom of the connecting rod. What am I doing wrong? It’s really hindering my progress.
I am stuck on the projecting part for the connecting rod. When I finish the connecting rod sketch and extrude. It is closer to one side not in the middle please help.
The video is nice , but you sketch is in a unusual way which is hard and you are not using the effective or the easy way to sketch which in involves 1) Shortcuts as well as when you dimentioning anything while creating it such as a line or circle which an increase the speed of your production. 2) Also you are not effectively using constrain command. 3) Some of the shortcuts which you should use are you can use right click and use the same command as before or repeat same command. these are small things which increase the speed of your production. As a well wisher hope you will take into considered the shortcuts and teach people with right method .
![กี่หมื่นฟ้า | Your Sky Series EP.1 [2/4]](http://i.ytimg.com/vi/qJbQs_nhjD4/mqdefault.jpg)
Thanks for making this video. It certainly helped me. I feel like I have learned a lot from it. Have a great day!
i was stubborn and didnt seek help with creating a piston cuz i thought i could do it myself but this video really helped thanks
Thank you for producing this tutorial. Grateful for your contributions.
Excellent. Thanks for sharing 👍
Great video but how do you record the movement of the piston as an animation?
Nice video but the speaker volume is way to low.
Can you please make a video for the last part.
Good work man!
Hi. Thanks again for sharing, I tried to follow but I’m having serious trouble in mirroring anything, especially when I had to do the mirror of the three open lines to complete the bottom of the connecting rod. What am I doing wrong? It’s really hindering my progress.
Very nice video,, bro... 👏👏☺️🔥👌
very good thanks for shows this tutorial
Where did you got the dimensions ??
nice video sir
How do set cylinder in this piston
can you 3d print this?
Yes you can
sir assemble ke aur v video bnaiyega ok
I am stuck on the projecting part for the connecting rod. When I finish the connecting rod sketch and extrude. It is closer to one side not in the middle please help.
Choose , extrude direction as symmetric
How you rotate shaft by using mouse. My solid can't rotate
Of you can't then you. Must have done something wrong when assembling
@@SPARKPLUG98 Ooh ok I will check my design😯
while giving motion of slider with piston and cylinder use as built joint
test
f
test
what??? cant hear you
The video is nice ,
but you sketch is in a unusual way which is hard and you are not using the effective or the easy way to sketch which in involves
1) Shortcuts as well as when you dimentioning anything while creating it such as a line or circle which an increase the speed of your production.
2) Also you are not effectively using constrain command.
3) Some of the shortcuts which you should use are you can use right click and use the same command as before or repeat same command.
these are small things which increase the speed of your production. As a well wisher hope you will take into considered the shortcuts and teach people with right method .