Congratulations, let me give you some constructive criticism, when testing an injection pump, first install the caps under the pump and then, lubricate it. Once I was testing a Volvo X 10 pump, low on lubricate oil. The pump almost melted on the test bench.
Rotating that pump in the vice is annoying and it's like that mechanic has a very small line if vision He can loosen a bolt he can't see It had to be right in front of him to loosen the bolt
I couldnt understand why they totally dismentalled the pump while noting to replace. I think the batter way to wash the pump externally first before dismentalling and check for diesel quentities per cylinder.
Sometimes the pump when sitting for a long time gets dirty from the dried diesel, like a laquer so a good clean and refit is a good solution for it to fully work again, also the pump elements might get dirty too with dirt and oil. It will definitely need calibration to work perfectly again.
![รวมเพลงลูกทุ่ง 6 หนุ่มไทบ้าน ฮิตติดกระแส ชุดที่ 1 l มนต์แคน ไมค์ ไผ่ เสถียร ไหมไทย พี [Longplay]](http://i.ytimg.com/vi/GD2v1OjMw5I/mqdefault.jpg)
Très extraordinaire vraiment ❤❤❤
ASMR for my brain
I like this work
Very nice brother
he needs to watch an area diesel service video on the bosch p7100 pump
Great !
Congratulations, let me give you some constructive criticism, when testing an injection pump, first install the caps under the pump and then, lubricate it. Once I was testing a Volvo X 10 pump, low on lubricate oil. The pump almost melted on the test bench.
Rotating that pump in the vice is annoying and it's like that mechanic has a very small line if vision
He can loosen a bolt he can't see
It had to be right in front of him to loosen the bolt
Comment obtenir les cales pour retirer l'arbre à cames sous commande?
Sir stating problem ke liyè kya kare
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
I have suggestions
I couldnt understand why they totally dismentalled the pump while noting to replace. I think the batter way to wash the pump externally first before dismentalling and check for diesel quentities per cylinder.
Sometimes the pump when sitting for a long time gets dirty from the dried diesel, like a laquer so a good clean and refit is a good solution for it to fully work again, also the pump elements might get dirty too with dirt and oil. It will definitely need calibration to work perfectly again.
Diesel value note same all nozels....
Like❤