Thank you so much for the video. Just fixed my parents LG 43" TV from watching your video. Ordered the backlights from China. Could not of done it without your video buddy so thank you again.
What a great repair guide! Had this exact tv and need to do this. What a nice help! Thank you. One reminder to someone doing this, is to be carefull with the rebon cables connecting the screen to the board. Its not clearly shown how to disconnect these.
Just followed the video and replacing the led strips is a easy fix. Sadly I damaged the lcd panel when applying pressure to clip the bezel back in place. Take care when clipping back into place.
Brilliant video, thanks! I typed my model number into Ali Express and found the backlight easily enough; the LEDs arrived and already had tape attached to them so easy to fit without the need to buy more tape. One thing to be careful of! When putting the frame back on the front take care as not to crack the LCD panel. I now have a small but annoying dark spot on my TV due to not being careful enough... Other than that, the TV works as new. Cheers!
I completely wrecked my LCD panel. Not totally sure how I did it. I solved the blue light but have made it unwatchable. Can't seem to purchase new panel anywhere.
@@bluehair1919 were you able to buy new panel? I replaced the led strips and they seemed OK but when adding lcd panel back I applied to much pressure to a corner and cracked it. Fixed blue picture but now have crack and lines on TV :(
I have fitted quite a few LED sets in TVs and I always think that the manufacturers should have designed them so that the LEDs could be changed without screen removal. The metal plate should have been made to be detached by removing a few screws and lifted away hence no screen removal and no breakage risk.
They dont want that, they want us to buy new ones....TVs lasting 15 years in the past killed their bottom lines lol.... it is tough on the smaller ones but im sure you found out the big screens are even tougher, they are so fragile replacing the LEDs can often lead to cracking them...you need a large well laid out area and be very very careful and CRACK they still can break lol. Then on top of it all they change up the led strips with almost every model.
@@timb7328 I agree, I won't do LED replacement in sets made by UMC because the nuggets have a habit of putting a bead of glue along the top edge of the screen. It's like they did it for a laugh. I have been a TV service engineer for 41years and I really miss CRT TV repair.
LG should be sued over these blue back lights.......I seen one place where they had 28 LGs all the same model and installed at the same time all turn blue within 3 years.
@@OpahCECS Every so often I still run into TVs from that year that are turning blue...they just werent used as much as the others so it took longer.....That failure rate is ridiculous (I bet around 80%). LG should have to send out checks to anyone that can prove they bought one of their TVs from that model year!!
Thank you very much, with your help from the video I was able to order some LEDS from Amazon and replace my LED backlight myself since LG was asking around 120€ to do it.
Hello! My name is Andromachi, I'm from Greece, yesterday with the help of your video I made my TV!! I'm so excited, it was amazing when I opened it and saw the colors right!! I would have to pay 200 euros, that's how much someone asked me to make it for me!! But it wasn't necessary thanks to your help!! Thanks so much for this!! Be well!!😇 😇 🙏🙏🤗🤗👌👌💚💚
I have this exact problem with the same TV. I have found the LED strips on eBay, plus the thermal tape. I will be following this guide to repair my TV. Thank you.
Thank you so much!! like everyone here, this video helped us fixed our parents LG 43" TV from watching your video. We Ordered the backlights in Ali Express and we code not have done it without your video so thank you!
Fixed my 55 inch lg thanks to this video 2 years old and lg didn’t want to do anything cause 2 years is good enough apparently. Repair shops also told us it wasn’t worth repairing it $51 aud later and it’s perfect
I'm scared to fix my 55", its so much bigger than the 43" in this video. I feel confident enough to do everything right but the sheer size of the TV makes me anxious. How long did it take you?
@@1400r that's awesome, thank you for your encouragement! I really like to fix things to make them last longer, would be too bad throwing away a TV that used to be this expensive.
This video is amazing. I had the exact issue, and with the help of this video, I was able to fix my TV. Thank you so much. You saved me a lot of money. Note to first timers: At around the 2:33-2:34 mark, the guy appears to unclip something. This took me a while to figure out what as he does it quickly, but if you look at the part where the ribbon goes in, there is a black/brown piece that looks like a part of the PCB and which can't move, but it can. That is what he flicked. Also, careful when reassembling. I unfortunately damaged the TV a little (really a tiny bit, so I'm not too upset) when I but the plastic frame back on after having put the black LCD on. The LCD is obviously very senstive, so if you put too much pressure, it will damage the TV.
I have one black spot in each led line on my 42" lg from 2014.Are this black spot mean that each black spot diode is dying?Already have replacement set,just waiting diods to die and then will replace with new.
Anyone who tries this make sure you take out the silver 1 inch wires gently by releasing the greysh tab up which is not shown in this video don't just try to yank it out
I can't disconnect the power cables from the LED strips. Seems like glued there. I'm afraid not to break the thin wires. Cables won't come off. They are stuck. What to do?
Thank you! Just fixed a 5 year old LG Tv using the video saving £300+ on a new TV. Take your time (put a couple of hours aside) and it’s pretty easy. My LEDs came with backing tape pre attached other than that identical.
Γειά σας! Με λένε Ανδρομάχη, είμαι από την Ελλάδα, χθες με τη βοήθεια του βίντεο σας έφτιαξα την τηλεόραση μου!! Είμαι πολύ ενθουσιασμενη, ήταν καταπληκτικό όταν την άνοιξα και είδα τα χρώματα σωστά!! Θα έπρεπε να δώσω 200 ευρώ, τόσα μου ζήτησε κάποιος για να μου τη φτιάξει!! Αλλά δεν χρειάστηκε χάρη στη βοήθεια σας!! Ευχαριστώ τόσο πολύ για αυτό!! Να είστε καλά!!😇 😇 🙏🙏🤗🤗👌👌💚💚
@@ΜαριοςΤριανταφυλλος καλημέρα σας! Τα ανταλλακτικά τα αγόρασε ο θείος μου απο το ίντερνετ από την Πολωνία, αλλά δεν γνωρίζω την τη διεύθυνση να σας πω..μου είπε ότι τα πήρε από εκεί γιατί είναι πολύ πιο φτηνά. Τα βρήκε 20€, ενώ εδώ στην Ελλάδα θα τα αγόραζε 70€τουλάχιστον!! Απλά κάνει καμία 10ρια μέρες να φτάσει!
Dostałem tv LG 32lf510b-zb z takim przypadkiem, kupiłem zwykłą taśmę led 5 metrów dobrałem tak że tv jak nowy😂, co prawda widac delikatnie te 4 paski na jednolitym obrazie ale najważniejsze że nie przekracza 24v (12v pasek polaczony szeregowo równolegle), w oryginale zasilane były 2 paski na 30v, 15v każda, a przy zmierzeniu bylo 31.5v, troszkę za wysoko.
Was going to say great guide, but how you’ve managed to lift that lcd out like without cracking it, I don’t know. I just followed along and I’ve managed to crack my screen 😢
@@ahmdo8485 lol ya but he asked about the thickness of the tape. Width wise, even if the thermal tape is a bit wider it won’t make a difference. It all gets covered by the white diffuser.
This yellow stuff on the LED is not just what filters blue light out of the LED specter. It is a sort of a phosphor, a chemical substance which re-emits UV light from the LED into bright visually white light so not so easy to find a replacement.
I cannot open my LG 43UM7400 back cover even I take off all the screws (5+4+1+1), it seems that there is another screw near the 'red light senser', but I cannot see any on the surface, could some one tell me the skill to open pl?
I have the 49" UHD LG got to the step of pulling the LED strips off, but the wire plug does not come out of the strip. Is there a trick to "unplugging" the old strip to install the new
I need to write my disappointing end result. I ordered LED strips from Aliexpress. Came in 3 weeks. The led spacing and diameter was different, amount was same. I had to cut new holes to the bottom white "paper". Everything else went ok. Upon assembly I noticed that I had cracked the corner of the LCD few centimeters. Once assembled - nothing. Red led at bottom turns on and flashes some code, but nothing on screen. I tried to go back and check LED connection but screen cracked even more. I don't know where I made the mistake. Maybe I damaged the panel cables when removing them or maybe all 3 strips were broken (hard to believe). Advice for others: Be extra careful with the panel. Prepare soft place were you will put it during backlight replacement. Extra pair of hands would be good. Even 43" is pretty flexible. Bigger size panel management would be horrible.
I have my LG 49uf640v-za. I have changed the leds, but when i try to reassemble it back I can see the reflections of the leds, like shadows! Do you know what the problem might be?
I have an LG 49uh603v, and the screen is not blue all the time, but flickers, sometimes it's a normal picture, sometimes it's blue. Does my TV also have a backlight problem?
Is this issue only present on LG tv's? Was that improved? I wonder if the newer models have the same issues and can be expected to go blue after few years...
I have the same make and type but with broken screen, based in Kenya How can I get the screen replacement please, and at how much. kindly contact through the same platform if possible. URGENTLY
Hi there thanks for the video! So i got the replacement lights and there was no way of testing the lights before reassembling the tv back. Turned it on, and there was no screen! Only sound, and the remote was responsive. I'm positive I've plugged everything back in. Apart from dud lights received, what could I have done wrong? By the way the lights were for an LG 60uj634v, and the lights came in 2 parts that connect to each other (A + B, C + D, etc). How do I test the lights before reassembling everything? Thank you in advance :)
have this exact TV with the same issue blue tint, wheres the best/cheapest place to get the LED replacements from, looking round the internet and not sure exactly what im looking for as the price difference is all over the place.
Wow just found my tv The right side of my tv went dark the other day so lets say 25 percent is dark but still watchable so im guessing it can only really be the back light as originally the whole screen went black and a little wrack to the back of the tv fixed 75 percent of the pic Only problem i have is i am not going to be able to do all that i dont have the confidence i have spoken to a repair shop that does have a great reputation i just hope he doesn’t charge me over 100 quid Great vid tho i always like to see a teardown of stuff i own
Hi. Thank you for your instructional video. Had the same issue on an LG 49UF640V-ZA. Was easy enough to disassemble and replace the LED strips. However now that it has been reassembled, I am getting a red flashing light on the front of the TV and it will no longer turn on. 🤔 Have you come across this before and might you be able to give me some directions to further troubleshoot? Thanks. Edit: Following complete reassembly and test again, the display comes on with the LG logo, but no backlights and I cannot see any further image displayed… 🤔
@@muhamedtrimi7820 Thanks for your reply. I didn’t get a notification for your message. I still have the TV as have put it to the side to have a look at another time. I will re-evaluate the LED Situation again and ensure that I did buy the correct lights. They looked the same as the ones that were removed. They had the same quantities of LEDs and the alignment holes were in the same positions along with the plugs being the same too, so I don’t know. I’ll have another look sometime. Thanks again.
@@cosmiclink661 if that’s the case, i think the polarity of the lights that you bought isnt the same with the tv, even if you see that the + ans - are in the same place as the tv ones its a big chance they are inversed
Thank you for this video, very encouraging me to repair my 43" for a few bucks instead of throwing away 99% well-working components. Just one question : is there a step in the process i should be particularly careful? It seems easy looking at you, but I worry breaking some else part trying to fix one. Thx
Be careful taking the frame off that holds the screen/filters etc. I broke a few clips off cause it was so tight but other than that it was smooth sailing. Follow the video step by step.
Hi! I have an LG TV 43uf6407 the image are not so blue as you shown but if I look a white screen it appear light blue is the same problem or it's different on your own? In the first case which type of led I have to buy? Tanx a lot and really great vids!
the length of the led bar please? I wanted to buy before disassembling the TV I could not find the exact reference. the seller asked me for the length of the bar and the number of leds (the number of leds is visible on the video 7 leds) but the length in CM if possible.
Hello, yes Weller is for more heavy jobs, its my first professional soldering station it does great job in past and tips super cheap, now Im using JBC its expensive and tips extremely expensive for more precision jobs.
Hello. I also used a Weller soldering station for my work, type WSP 80. I have also been using a JBC soldering station for about 7 years. Very good, I like it. You can quickly change tips while soldering. It's great that it switches off in sleep mode when I'm not using it. This protects the soldering tip. After that, it reaches the set temperature very quickly. A knife type tip is very good in most cases. It's not cheap, but it's worth the price. In Hungary, JBC stations are also used in the Samsung television factory. I repair televisions.
Hello! very interesting! I have a 32 "LG smart tv in the same conditions as this one I can't figure out what led strips it mounts the model is 32LJ610V-ZD, I would like to know what lamps it has before disassemble it, thanks!
If you go to Ali express and put in your model number, you should be able to find a backlight to match. I just got mine yesterday and put them in, my TV works well now. I tried to post a link before but apparently can't do that here...
![[VLOG] Wymiana podświetlenia LED w telewizorze LG 43LH510V](http://i.ytimg.com/vi/VDEG9leCvjs/mqdefault.jpg)
Thank you so much for the video. Just fixed my parents LG 43" TV from watching your video. Ordered the backlights from China. Could not of done it without your video buddy so thank you again.
How do you find the blue glue?
What a great repair guide! Had this exact tv and need to do this. What a nice help! Thank you.
One reminder to someone doing this, is to be carefull with the rebon cables connecting the screen to the board. Its not clearly shown how to disconnect these.
Now have a much brighter and whiter picture on my TV!
Thanks for the video
Thanks for the guide! Replaced the backlights on my LG 43UJ701V and it looks like a brand new TV!
Just followed the video and replacing the led strips is a easy fix. Sadly I damaged the lcd panel when applying pressure to clip the bezel back in place. Take care when clipping back into place.
Brilliant video, thanks! I typed my model number into Ali Express and found the backlight easily enough; the LEDs arrived and already had tape attached to them so easy to fit without the need to buy more tape. One thing to be careful of! When putting the frame back on the front take care as not to crack the LCD panel. I now have a small but annoying dark spot on my TV due to not being careful enough... Other than that, the TV works as new. Cheers!
I completely wrecked my LCD panel. Not totally sure how I did it. I solved the blue light but have made it unwatchable.
Can't seem to purchase new panel anywhere.
@@bluehair1919 were you able to buy new panel?
I replaced the led strips and they seemed OK but when adding lcd panel back I applied to much pressure to a corner and cracked it. Fixed blue picture but now have crack and lines on TV :(
Used this video to change led's on mine 43uj635v. Works just perfect, thank you
I have fitted quite a few LED sets in TVs and I always think that the manufacturers should have designed them so that the LEDs could be changed without screen removal. The metal plate should have been made to be detached by removing a few screws and lifted away hence no screen removal and no breakage risk.
They dont want that, they want us to buy new ones....TVs lasting 15 years in the past killed their bottom lines lol.... it is tough on the smaller ones but im sure you found out the big screens are even tougher, they are so fragile replacing the LEDs can often lead to cracking them...you need a large well laid out area and be very very careful and CRACK they still can break lol. Then on top of it all they change up the led strips with almost every model.
@@timb7328 I agree, I won't do LED replacement in sets made by UMC because the nuggets have a habit of putting a bead of glue along the top edge of the screen. It's like they did it for a laugh. I have been a TV service engineer for 41years and I really miss CRT TV repair.
They don't design TVs with repair in mind. They design them with ease of manufacture and cost saving in mind.
Thank you for video, repaired my tv for just cost of led strips, it was easy! 👍
LG should be sued over these blue back lights.......I seen one place where they had 28 LGs all the same model and installed at the same time all turn blue within 3 years.
Honestly. I bought mine new in like 2018, and it was dimming/turning blue after a year or so. They're 500ish now but back then it was 1300
Mine also after 3 years the screen turn blue.
@@OpahCECS Every so often I still run into TVs from that year that are turning blue...they just werent used as much as the others so it took longer.....That failure rate is ridiculous (I bet around 80%). LG should have to send out checks to anyone that can prove they bought one of their TVs from that model year!!
Il mio 55 pollici stessa cosa dopo 3 anni non acquisterò più marchi LG per tutta la mia vita.
A parte questo video cosa vuol fare vedere? Non spiega nulla e non fa vedere nulla video negativissimo per me pollice verso .
Thank you very much, with your help from the video I was able to order some LEDS from Amazon and replace my LED backlight myself since LG was asking around 120€ to do it.
Hello! My name is Andromachi, I'm from Greece, yesterday with the help of your video I made my TV!! I'm so excited, it was amazing when I opened it and saw the colors right!! I would have to pay 200 euros, that's how much someone asked me to make it for me!! But it wasn't necessary thanks to your help!! Thanks so much for this!! Be well!!😇 😇 🙏🙏🤗🤗👌👌💚💚
I have this exact problem with the same TV. I have found the LED strips on eBay, plus the thermal tape. I will be following this guide to repair my TV. Thank you.
Should probably use some gloves, 1 the panel cuts hard, 2. fingerprints :) Great video for those who think the blue is a "settings" issue lol
I thought it was only me. The panel at the back looks like a murder scene. Otherwise fixed
Thank you so much!! like everyone here, this video helped us fixed our parents LG 43" TV from watching your video. We Ordered the backlights in Ali Express and we code not have done it without your video so thank you!
And what kind of backlights I must buy??? There are too many kinds. Can you send me link for LG 43UJ630V??? Thanks
@@Horacepetr you just need to type in the exact model and google shopping backlight, they are usually sold from china
Fixed my 55 inch lg thanks to this video 2 years old and lg didn’t want to do anything cause 2 years is good enough apparently. Repair shops also told us it wasn’t worth repairing it $51 aud later and it’s perfect
I'm scared to fix my 55", its so much bigger than the 43" in this video. I feel confident enough to do everything right but the sheer size of the TV makes me anxious. How long did it take you?
@@m.s.6519 maybe 20 minutes super easy mate you’ll be right :)
@@1400r that's awesome, thank you for your encouragement! I really like to fix things to make them last longer, would be too bad throwing away a TV that used to be this expensive.
Hello, I have 55UJ634V with the same problem.
Is the method the same as in the video?
Excellent video
Thank, I fix my TV with your excellent video!
Samsung TVs had the same problem...
Thank you! I was able to change the backlight of my TV with your video!
This video is amazing. I had the exact issue, and with the help of this video, I was able to fix my TV. Thank you so much. You saved me a lot of money.
Note to first timers: At around the 2:33-2:34 mark, the guy appears to unclip something. This took me a while to figure out what as he does it quickly, but if you look at the part where the ribbon goes in, there is a black/brown piece that looks like a part of the PCB and which can't move, but it can. That is what he flicked.
Also, careful when reassembling. I unfortunately damaged the TV a little (really a tiny bit, so I'm not too upset) when I but the plastic frame back on after having put the black LCD on. The LCD is obviously very senstive, so if you put too much pressure, it will damage the TV.
Do you have a link to the tape he uses. The guy is good, but doesn't talk/explain much?
I have one black spot in each led line on my 42" lg from 2014.Are this black spot mean that each black spot diode is dying?Already have replacement set,just waiting diods to die and then will replace with new.
Anyone who tries this make sure you take out the silver 1 inch wires gently by releasing the greysh tab up which is not shown in this video don't just try to yank it out
Thanks for this important tip! Was trying to pull so hard and I couldn’t. Glad I didn’t damage it! For anyone wondering, it’s this part here @2:33
god bless you! i found it for my LG model
I can't disconnect the power cables from the LED strips. Seems like glued there. I'm afraid not to break the thin wires. Cables won't come off. They are stuck. What to do?
Thanks for the video fixed it in no time, this problem has put me off lg for life
Thank you! Just fixed a 5 year old LG Tv using the video saving £300+ on a new TV. Take your time (put a couple of hours aside) and it’s pretty easy. My LEDs came with backing tape pre attached other than that identical.
very quick process👍
Can you please give the link to aliexpress for led backlight thanks
Thank you very much, repair was a breeze (almost). Dzięki za pomoc!
Thank you for this great video instruction. I was able to resolve the blue screen problem following the video. Great Job .
Γειά σας! Με λένε Ανδρομάχη, είμαι από την Ελλάδα, χθες με τη βοήθεια του βίντεο σας έφτιαξα την τηλεόραση μου!! Είμαι πολύ ενθουσιασμενη, ήταν καταπληκτικό όταν την άνοιξα και είδα τα χρώματα σωστά!! Θα έπρεπε να δώσω 200 ευρώ, τόσα μου ζήτησε κάποιος για να μου τη φτιάξει!! Αλλά δεν χρειάστηκε χάρη στη βοήθεια σας!! Ευχαριστώ τόσο πολύ για αυτό!! Να είστε καλά!!😇 😇 🙏🙏🤗🤗👌👌💚💚
Καλημέρα σας!τα ανταλλακτικά από που τα πήρατε γιατί χρειάζομαι και εγώ.
@@ΜαριοςΤριανταφυλλος καλημέρα σας! Τα ανταλλακτικά τα αγόρασε ο θείος μου απο το ίντερνετ από την Πολωνία, αλλά δεν γνωρίζω την τη διεύθυνση να σας πω..μου είπε ότι τα πήρε από εκεί γιατί είναι πολύ πιο φτηνά. Τα βρήκε 20€, ενώ εδώ στην Ελλάδα θα τα αγόραζε 70€τουλάχιστον!! Απλά κάνει καμία 10ρια μέρες να φτάσει!
I completed the fix on mine and everything turns back on but I’m not getting any picture. Any thoughts on what could be the issue?
Dostałem tv LG 32lf510b-zb z takim przypadkiem, kupiłem zwykłą taśmę led 5 metrów dobrałem tak że tv jak nowy😂, co prawda widac delikatnie te 4 paski na jednolitym obrazie ale najważniejsze że nie przekracza 24v (12v pasek polaczony szeregowo równolegle), w oryginale zasilane były 2 paski na 30v, 15v każda, a przy zmierzeniu bylo 31.5v, troszkę za wysoko.
GREAT VIDEO. THANKS!!!, Leds fully replaced 👍👍
How can I upgrade the other kind that is not the one that is not flat screen
Was going to say great guide, but how you’ve managed to lift that lcd out like without cracking it, I don’t know. I just followed along and I’ve managed to crack my screen 😢
Excellent video - thank you. What thickness tape have you been using please? 8/10/12mm? Does it matter?
doesnt really matter that much, but thinner the better. I use 3m double sided tape about 2mm thick.
@@oneeyedrone4293 I believe he was referring to the width of the tape not the length? Not sure what size to get too, but might go for the 10mm.
@@ahmdo8485 lol ya but he asked about the thickness of the tape.
Width wise, even if the thermal tape is a bit wider it won’t make a difference. It all gets covered by the white diffuser.
This yellow stuff on the LED is not just what filters blue light out of the LED specter. It is a sort of a phosphor, a chemical substance which re-emits UV light from the LED into bright visually white light so not so easy to find a replacement.
Merci beaucoup pour ce tuto, impeccable 👌
Thanks for posting this video. Please, does CRH-A4330300104 LED Backlight Strip fit for LG 43UJ630V TV?
Awesome! Thanks for the video! Just repaired our LG TV!
Thx bro my tv looks new now🙏🙏
I cannot open my LG 43UM7400 back cover even I take off all the screws (5+4+1+1), it seems that there is another screw near the 'red light senser', but I cannot see any on the surface, could some one tell me the skill to open pl?
Will the new LEDs do the same thing over time, or is this a permanent fix?
Where can I buy the LED Strips for a 43-inch LG TV model 43UJ6510
thank u for thi video.. Is it the same back light strips for 43UJ631V model?
Hi bud I'm in N.Ireland I have an lg 43uj635v with the same blue tint. How much would you charge to fix? Thanks
I have the 49" UHD LG got to the step of pulling the LED strips off, but the wire plug does not come out of the strip. Is there a trick to "unplugging" the old strip to install the new
Big thanks. Now I'm more confident in repairing my 10€ purchase of 43" blue screen LG TV.
What is recommended source for new Led 's?
did you find where to buy those led strip?
@@ilanshoko Aliexpress
I need to write my disappointing end result. I ordered LED strips from Aliexpress. Came in 3 weeks. The led spacing and diameter was different, amount was same. I had to cut new holes to the bottom white "paper". Everything else went ok. Upon assembly I noticed that I had cracked the corner of the LCD few centimeters. Once assembled - nothing. Red led at bottom turns on and flashes some code, but nothing on screen. I tried to go back and check LED connection but screen cracked even more.
I don't know where I made the mistake. Maybe I damaged the panel cables when removing them or maybe all 3 strips were broken (hard to believe).
Advice for others: Be extra careful with the panel. Prepare soft place were you will put it during backlight replacement. Extra pair of hands would be good. Even 43" is pretty flexible. Bigger size panel management would be horrible.
hello.. where did you purchase the suction cup? any link? can't lcd be removed without suction cup?
Is 43uj630y use the same leds like 43uj630v ?
Thank You
I have lgit.65uk63.rev00.170616 backlight but i can't find the replacement in DUBAI can i use any other models with 9 lamps?
Come mai ho comprato le tre strisce ma non mi vanno ? Lo stesso prodotto
I have my LG 49uf640v-za. I have changed the leds, but when i try to reassemble it back I can see the reflections of the leds, like shadows! Do you know what the problem might be?
What kind of LED strip was that?
I have an LG 49uh603v, and the screen is not blue all the time, but flickers, sometimes it's a normal picture, sometimes it's blue. Does my TV also have a backlight problem?
Is this issue only present on LG tv's? Was that improved? I wonder if the newer models have the same issues and can be expected to go blue after few years...
I have the same make and type but with broken screen, based in Kenya How can I get the screen replacement please, and at how much. kindly contact through the same platform if possible. URGENTLY
Is it worth replacing? Or will it degrade again? How much did it cost?
Hi there thanks for the video! So i got the replacement lights and there was no way of testing the lights before reassembling the tv back. Turned it on, and there was no screen! Only sound, and the remote was responsive. I'm positive I've plugged everything back in. Apart from dud lights received, what could I have done wrong? By the way the lights were for an LG 60uj634v, and the lights came in 2 parts that connect to each other (A + B, C + D, etc). How do I test the lights before reassembling everything? Thank you in advance :)
Hi i re-disassembled the tv and plugged in the cable back and turned on the power switch, but the lights weren't coming on :(
Dziękuję, teraz już wiem jak naprawić mój TV.😃
Great job brother
Thanks 👍
perfect length of the video
have this exact TV with the same issue blue tint, wheres the best/cheapest place to get the LED replacements from, looking round the internet and not sure exactly what im looking for as the price difference is all over the place.
aliexpres type model number of your tv and get cheapest
Thanks a lot for sharing this video, step by step and very detailed. @WeFixTvs. Can you please suggest thermal tape size?
When I got my LED backlight from Ali Express it already had tape fitted so I didn't need to use any other tape, but if you need some it's 12 mm wide
Wow just found my tv
The right side of my tv went dark the other day so lets say 25 percent is dark but still watchable
so im guessing it can only really be the back light as originally the whole screen went black and a little wrack to the back of the tv fixed 75 percent of the pic
Only problem i have is i am not going to be able to do all that i dont have the confidence i have spoken to a repair shop that does have a great reputation i just hope he doesn’t charge me over 100 quid
Great vid tho i always like to see a teardown of stuff i own
Thank you my brother 🤘🏼 sorunumu çözdüm teşekkürler
I have a sharp 55" tv I replaced all 10 led strips they don't turn on but when I do combination of any 3 new and 7 old then leds turns on
Hi. Is it the 55UJ635V model?
Nice work bro
I need to find out where I can buy the TV TV
Where can we get the leds from please?
Hi. Thank you for your instructional video. Had the same issue on an LG 49UF640V-ZA. Was easy enough to disassemble and replace the LED strips. However now that it has been reassembled, I am getting a red flashing light on the front of the TV and it will no longer turn on. 🤔 Have you come across this before and might you be able to give me some directions to further troubleshoot? Thanks.
Edit: Following complete reassembly and test again, the display comes on with the LG logo, but no backlights and I cannot see any further image displayed… 🤔
the red flashing light means that the tv doesnt support dhe led strips that you bought make sure to buy the same one as the one that it had
@@muhamedtrimi7820 Thanks for your reply. I didn’t get a notification for your message. I still have the TV as have put it to the side to have a look at another time. I will re-evaluate the LED Situation again and ensure that I did buy the correct lights. They looked the same as the ones that were removed. They had the same quantities of LEDs and the alignment holes were in the same positions along with the plugs being the same too, so I don’t know. I’ll have another look sometime. Thanks again.
@@cosmiclink661 if that’s the case, i think the polarity of the lights that you bought isnt the same with the tv, even if you see that the + ans - are in the same place as the tv ones its a big chance they are inversed
@@cosmiclink661 keep us updated of what happens on your TV please
It turned on because no signal
Thank you for this video, very encouraging me to repair my 43" for a few bucks instead of throwing away 99% well-working components. Just one question : is there a step in the process i should be particularly careful? It seems easy looking at you, but I worry breaking some else part trying to fix one. Thx
Be careful taking the frame off that holds the screen/filters etc. I broke a few clips off cause it was so tight but other than that it was smooth sailing. Follow the video step by step.
Not turning on
65um6900pua
Can you please tell me what lights I need for this model?
Yea
Nice Job 👍🏻
Thanks! 👍
Videos has been vatched 30,000 times.
So there must be about 20,000 DIY guys that has blue LG.
Not to mention how many non DIY guys has trashed the tv
Thanks man 👍🏻
Wow that was good
Gud mrning yon sa LG 32lf520A papaano mag palit ng backlight blue n kasi kulay ng screen..salamat
Bellissimo video complimenti...bravo e veloce
I just replace the single leds that dies and break the circuit.Get the single led from old tvs
Hi! I have an LG TV 43uf6407 the image are not so blue as you shown but if I look a white screen it appear light blue is the same problem or it's different on your own? In the first case which type of led I have to buy? Tanx a lot and really great vids!
Same problem as this. Type your model number in on google and you’ll find a set on eBay.
I just threw mine on the garbage. Will not buy LG anymore
Hello Mate, do you have a video to show how to replace a cracked LG 43 inch LCD ?
He basically just did. Just do this. Only when you reassemble put the new screen in where the old one was 😂
the length of the led bar please? I wanted to buy before disassembling the TV I could not find the exact reference. the seller asked me for the length of the bar and the number of leds (the number of leds is visible on the video 7 leds) but the length in CM if possible.
Sorry don't have mesurements, model number of your tv should be enaugh.
Hi what tools did you use to dissemble it all thanks ?
Thin blade, Im using knife from time to time
Mate great vid can u do without thermal tape or it is a must ???
Better if you have tape if not try to use insulation tape on top of the strip
Greats Thanks to you !! i fixt my tv !
Dzień dobry! Is there a weller wsp 80 on the table?
Hello, yes Weller is for more heavy jobs, its my first professional soldering station it does great job in past and tips super cheap, now Im using JBC its expensive and tips extremely expensive for more precision jobs.
Hello. I also used a Weller soldering station for my work, type WSP 80. I have also been using a JBC soldering station for about 7 years. Very good, I like it. You can quickly change tips while soldering. It's great that it switches off in sleep mode when I'm not using it. This protects the soldering tip.
After that, it reaches the set temperature very quickly. A knife type tip is very good in most cases. It's not cheap, but it's worth the price. In Hungary, JBC stations are also used in the Samsung television factory. I repair televisions.
Hello! very interesting!
I have a 32 "LG smart tv in the same conditions as this one
I can't figure out what led strips it mounts
the model is 32LJ610V-ZD, I would like to know what lamps it has before disassemble it, thanks!
www.aliexpress.com/item/1005002955482008.html?spm=a2g0o.productlist.0.0.9a1f6628H4sqkk&algo_pvid=37183f14-52c7-4da1-bf2a-c14808cb96e9&aem_p4p_detail=202112101034402764868587468000006756044&algo_exp_id=37183f14-52c7-4da1-bf2a-c14808cb96e9-0&pdp_ext_f=%7B%22sku_id%22%3A%2212000022949584258%22%7D
Nice
Hey man, can you giveme the name of the backlight and where to buy them.
If you go to Ali express and put in your model number, you should be able to find a backlight to match. I just got mine yesterday and put them in, my TV works well now. I tried to post a link before but apparently can't do that here...
Bravo molto bravo cosa hai voluto dimostrare non hai spiegato nulla.
Where in Amazon can I find the LED lights?
We buying them on AliExpress. Don’t know if available on Amazon
@@WeFixTvs i have the same model how can i search for it in ali express? (serial number/name? ) . Thanks
Ware can I purchase the double sided tape from
Aliexpress