Would I be able to use Solo 2 with OBDII ECU input + the TPMS receiver? Would just need to wire up the receiver with the 5 pin connector correct? And I guess would need that as an option in the config?
Is it 4 analog sensors total or 4 analog sensors before needing a data hub? for example, can I have a second ACC attached to a datahub feeding the Solo2DL 8 analog channels?
For your specific application of the SOLO2DL, you may only add one ACC device to the CAN network. For other devices in our automotive line like EVO and MXx hardware, you may add multiple ACC devices.
Yes absolutely. You will need a small data hub to connect the ACC and LCU one into. Then the data hub plugs in the Solo2DL. We highlighted this in a schematic in this presentation.
@@chloe147Roger mentioned during webinar that only one ACC could be connected to Solo 2 DL. However, can I use a data hub to connect at the same time the channel expansion and ACC to get more analog channels available? Is this possible with Solo 2 DL?
@@jsbb916Hi. No, the Solo2DL will limit you to 4 analog channels. You can use 1 channel expansion or 1 ACC, but not both at the same time. You’ll notice that when you add a new expansion in the config page, at first you have: LCU-One, channel expansion and ACC. If you pick the channel expansion, then the ACC disappears from the available expansions, and vice versa. For more than 4 channels, you really want to consider an EVO5 or a dash. I hope this helps.
Would I be able to use Solo 2 with OBDII ECU input + the TPMS receiver? Would just need to wire up the receiver with the 5 pin connector correct? And I guess would need that as an option in the config?
I think only with ACC Open TPMS can work
Have downloaded your Math Channels - how do I load these in the software? Sorry for noob question!
Is it 4 analog sensors total or 4 analog sensors before needing a data hub? for example, can I have a second ACC attached to a datahub feeding the Solo2DL 8 analog channels?
For your specific application of the SOLO2DL, you may only add one ACC device to the CAN network. For other devices in our automotive line like EVO and MXx hardware, you may add multiple ACC devices.
@@aimsportsdata got it, thanks!
Is this able to be used with product lines outside of AiM or only compatible with AiM products?
An open version is coming with programmable CAN output and buss speed. We’ll have an update early-mid December.
Would I be able to use the LCU-One Lambda Controller with the ACC and a solo II DL
Yes absolutely. You will need a small data hub to connect the ACC and LCU one into. Then the data hub plugs in the Solo2DL. We highlighted this in a schematic in this presentation.
@@chloe147Roger mentioned during webinar that only one ACC could be connected to Solo 2 DL. However, can I use a data hub to connect at the same time the channel expansion and ACC to get more analog channels available? Is this possible with Solo 2 DL?
@@chloe147thank you will I also need the data hub to use my smartycam 3 corsa
@@bri21030yes. You will need a data hub since the Solo2DL only has one 5-pin port.
@@jsbb916Hi. No, the Solo2DL will limit you to 4 analog channels. You can use 1 channel expansion or 1 ACC, but not both at the same time.
You’ll notice that when you add a new expansion in the config page, at first you have: LCU-One, channel expansion and ACC.
If you pick the channel expansion, then the ACC disappears from the available expansions, and vice versa.
For more than 4 channels, you really want to consider an EVO5 or a dash.
I hope this helps.
Does it work with mychron5S?
for me don't