I setup up one of these some while back. Very easy to do. I was making a separate interface when i found this device for half the dealers price . So for £12 i bought one. It works well. It's a bit messy i find with cables everywhere where my own arrangements would be a lot neater. Thanks for your input a good video .
Thanks! This was extremely helpful. Good advice about checking wiring and cables as it looks from the Radioditty documentation that as of June 2021 Xiegu has reversed tip and ring and also shipped one audio cable with a green color connector. My Xiegu G90 bought the month before had audio cables that match this video and no green connector cable. I am unclear as to why Xiegu can't just ship this with a cable that works for most PCs.
I am still scratching my head as to why they didnt just put the cable in with the rest . Then some bright spark probably from Xiegu comes out with a $99.99 cable . Seriously !
I appreciate you compiling this video. It was helpful. I have been avoiding it since the instructions that came with the radio were lacking in detail\clarity in my opinion.
Same here! Raddiodity did a spectacular fail this time when it comes to documentation. I have their CE-19 gadget. Don't like it at all. NOTHING about this whole shenanigans thing is easy, convenient or what should come with a $500- expenditure.
I use the DE-19 (built in soundcard and usb to pc) and G90 for digital in the shack. I only use the CE-19 to connect G90 to XPA125 for SSB in the field and don't need rig control.
Muy buen y completo video, principalmente el diagrama de como unir los tres cables que están en la caja y no está explicado para nada, ahora a comenzar a soldar, gracias por el video.
My laptop is a little bit different. I only need one connection for headphones and a microphone. So that means the setup in their manual is good for me!
I watched your video and it’s not working. I checked the wires with a continuity tester. When I get everything plugged in and set up the software I keep getting communication bus collision. When I used wjstx it’s like the ce19 isn’t communicating with the radio and computer. Any ideas?
Did you check in device manager for the com port? With this setup there are possibly two USB ports, one for a sound card and the other for the cat control cable.
@@OnTheWorkbench I checked the com port and it was correct. What is confusing is I got it to work once then it stopped and gave me another communication bus error. I will try again tomorrow. Thank you for getting back to me.
@@axemanarbor no luck at all. The radio transmits but doesn’t receive. I have watched almost every video and still nothing. I think the only thing left is trying a different configuration when making the cables from the ce-19 to the computer.
I bought this CE19 almost a year ago NOT knowing it was not a complete plug and play thing. In 2024 that is BS. I am not an electrician nor do I want to be and hate dealing with incomplete crap. Thanks for doing your best but about threw it in the trash because of this. Do NOT recommend unless you want hours of frustration trying to figure this garbage out.
No kidding! That thing is super simple to use and takes up barely any space. I keep my xggcoms cable in my go box and use the "official" setup at home.
A must-watch video for any G90 owners wanting to understand the cable set-up and correct installation of the CE-19. Thanks!
I setup up one of these some while back. Very easy to do. I was making a separate interface when i found this device for half the dealers price . So for £12 i bought one. It works well. It's a bit messy i find with cables everywhere where my own arrangements would be a lot neater. Thanks for your input a good video .
Thanks! This was extremely helpful. Good advice about checking wiring and cables as it looks from the Radioditty documentation that as of June 2021 Xiegu has reversed tip and ring and also shipped one audio cable with a green color connector. My Xiegu G90 bought the month before had audio cables that match this video and no green connector cable. I am unclear as to why Xiegu can't just ship this with a cable that works for most PCs.
I am still scratching my head as to why they didnt just put the cable in with the rest . Then some bright spark probably from Xiegu comes out with a $99.99 cable . Seriously !
I appreciate you compiling this video. It was helpful. I have been avoiding it since the instructions that came with the radio were lacking in detail\clarity in my opinion.
Same here! Raddiodity did a spectacular fail this time when it comes to documentation. I have their CE-19 gadget. Don't like it at all.
NOTHING about this whole shenanigans thing is easy, convenient or what should come with a $500- expenditure.
Great video! has helped get a general idea of the setup process.
I use the DE-19 (built in soundcard and usb to pc) and G90 for digital in the shack. I only use the CE-19 to connect G90 to XPA125 for SSB in the field and don't need rig control.
Thanks for this!
Tiny nitpick .. TRS Tip/Ring/Sleeve (not shank)
Muy buen y completo video, principalmente el diagrama de como unir los tres cables que están en la caja y no está explicado para nada, ahora a comenzar a soldar, gracias por el video.
Very well done! Thanks
좋은 내용을 알려주셔서 감사합니다!
Glad I found ya !
Glad to help!
So what do I do if I do not have the special blue cable? And what does it actually do?
Thank You!
Спасибо за видео.Всё доходчиво.Удачи!
My laptop is a little bit different. I only need one connection for headphones and a microphone. So that means the setup in their manual is good for me!
Not necessary. This will still work, because you are using a SoundCard to USB.
WISH THEY CAME WITH CABLES THAT ADID NOT NEED SOLDERING.
My question is , how can we use an amplifire with CE19 along with digital mode like JS8 call. Please make a video about it
Thank you
73
how do you set up the G90 itsself (menu settings).. also, how do you set up the PC software?
I watched your video and it’s not working. I checked the wires with a continuity tester. When I get everything plugged in and set up the software I keep getting communication bus collision. When I used wjstx it’s like the ce19 isn’t communicating with the radio and computer. Any ideas?
Did you check in device manager for the com port?
With this setup there are possibly two USB ports, one for a sound card and the other for the cat control cable.
@@OnTheWorkbench I checked the com port and it was correct. What is confusing is I got it to work once then it stopped and gave me another communication bus error. I will try again tomorrow. Thank you for getting back to me.
Any luck yet ?
@@axemanarbor no luck at all. The radio transmits but doesn’t receive. I have watched almost every video and still nothing. I think the only thing left is trying a different configuration when making the cables from the ce-19 to the computer.
I bought this CE19 almost a year ago NOT knowing it was not a complete plug and play thing. In 2024 that is BS. I am not an electrician nor do I want to be and hate dealing with incomplete crap. Thanks for doing your best but about threw it in the trash because of this. Do NOT recommend unless you want hours of frustration trying to figure this garbage out.
Xiegu should send an xggcoms cable straight up
No kidding! That thing is super simple to use and takes up barely any space. I keep my xggcoms cable in my go box and use the "official" setup at home.
@@OnTheWorkbench TAKE NOTE XIEGU!!