The all story... as depicted by the all father. 1st of his name, defender of the realm, sprayer of all finishes, vanquisher of bleed through, maester of the color wheel, and hand of the scheme!
I’ve sprayed products that recommended a 619 tip using using a 310 tip...it’s great using small tips keeps overspray down significantly when doing residential repaints
Hi deren thanks for this video, a great and clear explanation. I was wondering if HEA Wagner Tips can be mounted on standard Wagner tip guards and used on an Older Wagner Project Pro 117 ?
Hi Alfred, you can use the HEA Profi tips with a standard Wagner tip holder (Wagner Trade Tip 3 tip holder). This way they would fit your ProjectPro 117 too. But be careful there are also Wagner HEA for the new DIY series (ControlPro series). There tips will not fit. Best regards, Stefan
You will find that pinholes in the finished surface are usually can be blamed on people used wd40 or pledge polish in the close environment. If a cocommecial customer comes up with this problem is 99% its time to change the furniture polish u use. It even effects powered coating.
Great video. It was almost all the info I was looking for; however, it lacked info about the RAC IV tips. I have an older sprayer - Graco Magnum LTS17 Pro.
What a fantastic video! Thank you very much indeed, I really appreciate your time and sharing your knowledge! 👍 Do you think a water based gloss paint would be good through a Graco FFLP 310 on a Graco 360 spray gun?
To clean the nozzle you can use a Nitro dilution or CHC (stripping). but that would also attack the plastic, so you would need to be careful when cleaning the metal parts of the spray tip only. Otherwise simply insert in a Tip Cleaner. But you will need to check cleaning requirements for multi-component materials.
Hi Marcus, without any other information, spraying walls can be done with a standard 415 spray tip. You can use the low pressure spray tip too, if desired. Fine finish spray tips are generally used for your woodwork, trimmings, staircases, cabinets.
Hi, It depends as usual on the product you want to spray. Please contact your plaster supplier to check their recommendations. Kind regards, Airless Discounter team
Great video, thanks for that. I just recently got Graco TC Pro handheld sprayer from Home Depot and it came with gray guard and gray tip 514 - what's the difference between it and blue guard with blue tip in 514 or 515? And why can't I put blue tips in the gray guard? I'm planning on painting the walls inside my garage and then later my kitchen and bedroom walls. Thanks.
Hi, The tip of your sprayer looks like a green low pressure tip like RAC X FFLP. But as it is a special product delivered only within USA, we would advise you to get in touch with your original supplier to be able to buy the right tips for it. Kind regards, Airless Discounter team
I’ve got a Graco X7. I’ve never used it inside, but I’d like to spray a residential, interior room, for which I’d like to limit overspray. Which tip would you recommend?
Hi Deren thanks for this video, it is a great and clear explanation. I have a NEW sprayer (used once) that I won, but I am sure it is discontinued. It's a Milwaukee paint sprayer Model M4910-21. I believe the spray guard is a 7/8 ". I have 2 spray tips #619 and #310. I think the #619 is for heavier paints, and #310 tip is for finish applications. MY QUESTION is what are the available tips that you stock, that will fit this Milwaukee spray gun? Any other information you can provide will be appreciated.
Hi, Thanks for your comment. Unfortunately, we do not know and work with this brand. Best for you is to consult the manufacturer and check all thread sizes. Guns/hoses threads for Graco and Wagner are 1/4" today. Guns/Tip holders threads are 7/8" and so extensions are therefor 7/8". Thanks for your understanding. Airless Discounter team
Hi, thanks alot for the video it's great. I've got a few questions/requests for you. Are you able to go into a bit more detail, or point me in the direction of any videos you have that do, on the wagner tips that you showed that have the HEA marking on it with the soft spray technology. Also you spoke of how the guards are able to work on all the guns, so what are your thoughts on say using a different guard with different tips on the gun of a different brand, this is something I might have to do as I've got a wagner airless sprayer but it's quite hard to find tips for it in my city, while we have quite a decent availability for titan and graco sprayers. Or do you know if any of the spray tips are interchangable with the guards of different brands?
Hi, Thanks for your question. Regarding the HEA tips, you'll find the product link below as well as the blog article related to it : - Shop : www.airless-discounter.de/airless-spray-tips - Blog : www.airless-discounter.de/news/airless-nozzle/ For the compatibilities ; Which low pressure tip would you like to use with which gun ? Kind regards, Airless Discounter team
I can't find an answer from Graco or online. Can you use a Graco TC Pro with the RAC X tips? Do I just need to get a RAC X spray guard? Or is the TC Pro not compatible with the RAC X tips?
Hi, Thanks for your comment. Yes the RAC X is compatible with this HH Graco sprayer (7/8") when using the RACX tip holder. Here's the product link : www.airless-discounter.de/Graco-RAC-X-Tip-Holder-for-Paint-Sprayers-246215 Find here as well your gun's drawing with all spare parts if needed : www.graco.com/content/dam/graco/tech_documents/manuals/3A4/3A4476/3A4476EN-E.pdf Kind regards, Airless Discounter team
It depends always what you want to do with it. For interior painting for example, RAC X LP are often best to use. Kind regards, Airless Discounter team
No, the Wagner HEA tips are used for the Wagner Control Pro models 250 and 350. There are HEA "Pro" tips that are compatible, but please first check which spray tips you have - since both HEA and HEA Pro tips from Wagner are green but the cylinders are different sizes.
HEA tips that has part number start with 353-xxx is for Wagner or Titan HEA gun only , they are not interchangeable. HEA tips with part number 554-xxx in Europe or 330-xxx in North America are ones that can be used on some other guns.
Hi, As we don't work with DIY brands models, we can't confirm this. Do the test after checking with your original retailer. Kind regards, Airless Discounter team
Im just getting started and got the avanti one from HF. I know its probably crappy. But it has the red guard and black tips from them. Can i assume that ill need a blue graco guard to use the graco tips?
We don't work with this brand so we would advice you to stay safe and get a RAC X tip holder from Graco for Graco's RAC X tips yes. Kind regards, Airless Discounter team
It is probably best to use nozzles with an angle of 2XX or 3XX for example. Regarding the orifice size, you should check this with the manufacturer of the material used. You should also try to use low pressure nozzles. Kind regards, Airless Discounter team
whats the significance of the different guards to the different tips? is it a matter of simply fitting or something more? Same goes with the insert valve thingy that comes with the tips, and the gasket
Which tip seals/ gasket do I use with smaller fflp tips 310,208 etc I’ve noticed that some tip gaskets have smaller diameter orifices? And dose that make a difference in my spray pattern ,over spray and pressure-adjustment?
I am using PPG steelgured 851 intumescent > and the data sheet saying that i need to use nozzle angle = 20-50 ,Nozzle Orifice=0.019-0.025 and Nozzle pressure=20.0 Mpa >>> based on the data given what size tip will be the best to use . for your info i am using Graco Mark X machine and using tip size 227 > but i am having sagging problem. please help
Hi Masood, the data sheet did also recommend thinning the material for Airless spraying. Did you try that too? This material also has a drying time - dry to touch of 20 minutes, which also might be contributing to the clogging issue. Let us know if thinning the material helped.
Hi, I would like to know what tip would you recommend on a wagner control pro 150 for spraying 6 panel doors in semi gloss latex? I used the HEA 515 that came with the kit but it's a little excessive for these panel doors. Something like a 310, 315 or even 410, 415 would be better just not sure what fits my HEA control pro gun.
Hi, Thanks for your question. As we only specialise in airless machines for the professional sector, we recommend that you seek advice from your original dealer regarding this model. Thank you for your understanding. Wishing you a nice day. Kind regards, Airless Discounter team
What kind of solvent you use for cleaning a Wagner 350 m after oil base paint ? And the oil for long storage can be either 10w30 or cooking oil ( olive oil ) ? Thank you in advance
Hi, Please don't use any cooking oil for your machine. It is not a french fry machine. You'll use some dissolvant you'll find in supermarket or DIY shops to clean it. What important is for you to wash the pump inside with water after you used these products to clean the oil base paint. This way you'll protect you pump a little longer. Kind regards, Airless Discounter team
Airless Discounter International thank you for your information. So if I understand correctly is you clean first with the dissolvment and then with the water. As far as the cooking oil, it’s an advise from Wagner to use cooking oil or 10w30 for long storage. It is written on the manual of the product ( 350 m) Thanks again you are doing great job !!!
Only if you have the following tip holder : www.airless-discounter.de/Graco-RAC-X-Tip-Holder-for-Paint-Sprayers-246215 Kind regards, Airless Discounter team
Hi, If you're talking about the gun SG2/SG3 given with the Magnum X7 pump, you just have to equip your gun with a RACX tip holder and then you'll be able to use the RACX LP and FFLP low pressure tips from Graco. Kind regards, Airless Discounter team
I spray some efficengy apartments and I'm finding the 515 is just to big I was thinking of going down to a 3ff but should I go with a 310ff or a 312 ff
@@georgegann2749 yea the 310ff is nice for doors and trim but the FF just doesn't do well with walls and ceilings I'm getting better with the 517 I would rather have a 310 non fine finish but i'm learning
![[HOW TO] Setup Your Airless Paint Sprayer [Get INSPIRED]](http://i.ytimg.com/vi/XxGc9JTHrpo/mqdefault.jpg)
![[HOW TO] Setup Your Airless Paint Sprayer [Get INSPIRED]](/img/tr.png)
![Airless Spray Tips [EXPLAINED] How To Choose & Install a Spray Tip](http://i.ytimg.com/vi/gT3H7DHcnlM/mqdefault.jpg)
By far is the best video on TH-cam explain the all story about paint sprayers . Many thanks
Thanks Youssef, we have many more video and content in our blog: www.airless-discounter.de/news/
The all story... as depicted by the all father.
1st of his name, defender of the realm, sprayer of all finishes, vanquisher of bleed through, maester of the color wheel, and hand of the scheme!
Man what a good video for a newbie like me. This information in priceless!!
We're happy we could help you! :)
Thanks for removing some of the mystery behind paint tips. Great video
I totally agree with Mr. Dine Youssef, it was added value.
Wow, great explanations. Plenty to digest for the DIY-er, tho.
Thanks , was really good tips!
Prof. info god tips i watched yr full video very helpfull
Thank you very much for your support.
Kind regards,
Airless Discounter team
amazing best video
Great work Daren. Thank you for sharing.
Awesome video. I learned a ton. Thanks again
Answered a lot of questions for me. Thankyou!
Excellent explanation
I’ve sprayed products that recommended a 619 tip using using a 310 tip...it’s great using small tips keeps overspray down significantly when doing residential repaints
Super very nice video!!!
Thank you for your support.
Kind regards,
Airless Discounter team
Darren. thanks man
Good info
Well said.. thanks
We glad you enjoyed it!
thank you Daren this video is realy helps..
Hi deren thanks for this video, a great and clear explanation. I was wondering if HEA Wagner Tips can be mounted on standard Wagner tip guards and used on an Older Wagner Project Pro 117 ?
Hi Alfred, you can use the HEA Profi tips with a standard Wagner tip holder (Wagner Trade Tip 3 tip holder). This way they would fit your ProjectPro 117 too. But be careful there are also Wagner HEA for the new DIY series (ControlPro series). There tips will not fit. Best regards, Stefan
You will find that pinholes in the finished surface are usually can be blamed on people used wd40 or pledge polish in the close environment. If a cocommecial customer comes up with this problem is 99% its time to change the furniture polish u use. It even effects powered coating.
Great video. It was almost all the info I was looking for; however, it lacked info about the RAC IV tips. I have an older sprayer - Graco Magnum LTS17 Pro.
What is your definition of a fine finish
I would like to know the nozzle number of the gun for water-based / plastic paint, thank you
Great video for a DIY beginner painter. Question, when investing in a sprayer should I look at Graco or Titan? Thx
I personally love graco products.
Hi,
Each supplier has more or less equivalent models.
What a fantastic video! Thank you very much indeed, I really appreciate your time and sharing your knowledge! 👍 Do you think a water based gloss paint would be good through a Graco FFLP 310 on a Graco 360 spray gun?
This depend only on the product and manufacturer. Please double check with them.
Kind regards,
Airless Discounter team
@@AirlessDiscounterInternational Thank you for your reply, I'll give it a go and see how I get on.
I m from India sir and i m paintre sir
Amazing presentation mate, extremely detailed and informative all in.
Which spray tips comes with the sprayer?
Thank you. Which sprayer ?
Kind regards,
Airless Discounter team
I am interested in knowing which tip comes with the 5X?
We are sorry but we don't sell that sprayer. You'll have to contact a retailer that does it.
Kind regards,
Airless Discounter team
What is the most aggressive solvent you can use to clean your tips? (Latex) Ammonia? Laquer?
To clean the nozzle you can use a Nitro dilution or CHC (stripping). but that would also attack the plastic, so you would need to be careful when cleaning the metal parts of the spray tip only.
Otherwise simply insert in a Tip Cleaner. But you will need to check cleaning requirements for multi-component materials.
Hot water the hotter the better
Which would theoretically be better for walls; the FFLL or LP tip? Currently using a FFLP 412 but thinking of using an LP 415.
Hi Marcus, without any other information, spraying walls can be done with a standard 415 spray tip. You can use the low pressure spray tip too, if desired. Fine finish spray tips are generally used for your woodwork, trimmings, staircases, cabinets.
I mean you could use an fflp tip but youd be there way longer so kinda defeats the reason for having an airless to begin with.
can you use gasket and seat interchangeably, meaning use 210 gaskets and seat in 310 tips?
Can i use Drylock with the Wagner Control Pro 130? Any tips there? THANK YOU!!
My Wagner paint sprayer won’t spray with the tip on. As soon I take it off it will. They are brand new tips aswell
Hi,
Maybe the tip is too small or too old for the product sprayed.
great video.. I just purchased a. mark v for spraying level 5.. What tips would you recommend to use for spraying plaster?
Hi,
It depends as usual on the product you want to spray. Please contact your plaster supplier to check their recommendations.
Kind regards,
Airless Discounter team
Great video, thanks for that. I just recently got Graco TC Pro handheld sprayer from Home Depot and it came with gray guard and gray tip 514 - what's the difference between it and blue guard with blue tip in 514 or 515? And why can't I put blue tips in the gray guard? I'm planning on painting the walls inside my garage and then later my kitchen and bedroom walls. Thanks.
Hi,
The tip of your sprayer looks like a green low pressure tip like RAC X FFLP. But as it is a special product delivered only within USA, we would advise you to get in touch with your original supplier to be able to buy the right tips for it.
Kind regards,
Airless Discounter team
I’ve got a Graco X7. I’ve never used it inside, but I’d like to spray a residential, interior room, for which I’d like to limit overspray. Which tip would you recommend?
The RAC X LP on a paint gun of course.
You'll find it here : airless-discounter.de/Graco-RAC-X-LP-Spray-Tip-Low-Pressure-Spray-Tip_1
@@AirlessDiscounterInternational thanks.
Graco and Wagner are the same tips?
Hi Deren thanks for this video, it is a great and clear explanation. I have a NEW sprayer (used once) that I won, but I am sure it is discontinued. It's a Milwaukee paint sprayer Model M4910-21. I believe the spray guard is a 7/8 ". I have 2 spray tips #619 and #310. I think the #619 is for heavier paints, and #310 tip is for finish applications. MY QUESTION is what are the available tips that you stock, that will fit this Milwaukee spray gun? Any other information you can provide will be appreciated.
Hi,
Thanks for your comment.
Unfortunately, we do not know and work with this brand. Best for you is to consult the manufacturer and check all thread sizes.
Guns/hoses threads for Graco and Wagner are 1/4" today.
Guns/Tip holders threads are 7/8" and so extensions are therefor 7/8".
Thanks for your understanding.
Airless Discounter team
P ll polll lo
Hi, thanks alot for the video it's great. I've got a few questions/requests for you. Are you able to go into a bit more detail, or point me in the direction of any videos you have that do, on the wagner tips that you showed that have the HEA marking on it with the soft spray technology.
Also you spoke of how the guards are able to work on all the guns, so what are your thoughts on say using a different guard with different tips on the gun of a different brand, this is something I might have to do as I've got a wagner airless sprayer but it's quite hard to find tips for it in my city, while we have quite a decent availability for titan and graco sprayers. Or do you know if any of the spray tips are interchangable with the guards of different brands?
Hi,
Thanks for your question.
Regarding the HEA tips, you'll find the product link below as well as the blog article related to it :
- Shop : www.airless-discounter.de/airless-spray-tips
- Blog : www.airless-discounter.de/news/airless-nozzle/
For the compatibilities ; Which low pressure tip would you like to use with which gun ?
Kind regards,
Airless Discounter team
I can't find an answer from Graco or online. Can you use a Graco TC Pro with the RAC X tips? Do I just need to get a RAC X spray guard? Or is the TC Pro not compatible with the RAC X tips?
Hi,
Thanks for your comment.
Yes the RAC X is compatible with this HH Graco sprayer (7/8") when using the RACX tip holder.
Here's the product link : www.airless-discounter.de/Graco-RAC-X-Tip-Holder-for-Paint-Sprayers-246215
Find here as well your gun's drawing with all spare parts if needed : www.graco.com/content/dam/graco/tech_documents/manuals/3A4/3A4476/3A4476EN-E.pdf
Kind regards,
Airless Discounter team
South African?
Which is best Tips, Racs for Road marking painting(Zebra) 10, 15, 45 inches
It depends always what you want to do with it. For interior painting for example, RAC X LP are often best to use.
Kind regards,
Airless Discounter team
I need a narrow spray. I use it for wood fencing, and wood garden items. which one???
You'll find nozzles with an angle from 20° or 30° for example.
Good day what size tip you recommend for spraying tin or galvanized sheeting
Find these details by contacting your paint retailer or on their data sheets.
Kind regards,
Airless Discounter team
Can I use the HEA tips with a graco magnum X5?
No, the Wagner HEA tips are used for the Wagner Control Pro models 250 and 350. There are HEA "Pro" tips that are compatible, but please first check which spray tips you have - since both HEA and HEA Pro tips from Wagner are green but the cylinders are different sizes.
HEA tips that has part number start with 353-xxx is for Wagner or Titan HEA gun only , they are not interchangeable. HEA tips with part number 554-xxx in Europe or 330-xxx in North America are ones that can be used on some other guns.
What rac guard and tip can be used on the ebauer 600 thanku
Hi,
As we don't work with DIY brands models, we can't confirm this.
Do the test after checking with your original retailer.
Kind regards,
Airless Discounter team
With a grey xhd 513 tip how long before you should change the tip using an epoxy 1:1 ratio paint ?
Im just getting started and got the avanti one from HF. I know its probably crappy. But it has the red guard and black tips from them.
Can i assume that ill need a blue graco guard to use the graco tips?
We don't work with this brand so we would advice you to stay safe and get a RAC X tip holder from Graco for Graco's RAC X tips yes.
Kind regards,
Airless Discounter team
What's best for wood decks and fences?
It is probably best to use nozzles with an angle of 2XX or 3XX for example.
Regarding the orifice size, you should check this with the manufacturer of the material used.
You should also try to use low pressure nozzles.
Kind regards,
Airless Discounter team
whats the significance of the different guards to the different tips? is it a matter of simply fitting or something more?
Same goes with the insert valve thingy that comes with the tips, and the gasket
Hi,
They do not always fit indeed.
Kind regards,
Airless Discounter team
Here's some tips on tips
Indeed! haha :)
Which tip seals/ gasket do I use with smaller fflp tips 310,208 etc I’ve noticed that some tip gaskets have smaller diameter orifices? And dose that make a difference in my spray pattern ,over spray and pressure-adjustment?
Hi,
Always use the seals provided with your Tips.
> www.airless-discounter.de/airless-spray-tips
Kind regards,
Airless Discounter team
I am using PPG steelgured 851 intumescent > and the data sheet saying that i need to use nozzle angle = 20-50 ,Nozzle Orifice=0.019-0.025 and Nozzle pressure=20.0 Mpa >>> based on the data given what size tip will be the best to use . for your info i am using Graco Mark X machine and using tip size 227 > but i am having sagging problem. please help
and also keep clogging again and again
Hi Masood, the data sheet did also recommend thinning the material for Airless spraying. Did you try that too? This material also has a drying time - dry to touch of 20 minutes, which also might be contributing to the clogging issue. Let us know if thinning the material helped.
Makina usd list
Does this mean that the old Graco tips such as the TrueAirless, can be used with a black Titan/Wagner guard?
Hi, the old Graco RAC V tips (black) can be used with a Wagner guard.
If it true Graco are phasing out the blue RAC x tips and leaving us with the ff Lp
Hi there, thank you for watching :) Graco are not phasing out the standard tips, they are used for different applications than the fine finish tips.
Hi, I would like to know what tip would you recommend on a wagner control pro 150 for spraying 6 panel doors in semi gloss latex? I used the HEA 515 that came with the kit but it's a little excessive for these panel doors. Something like a 310, 315 or even 410, 415 would be better just not sure what fits my HEA control pro gun.
Hi,
Thanks for your question.
As we only specialise in airless machines for the professional sector, we recommend that you seek advice from your original dealer regarding this model.
Thank you for your understanding.
Wishing you a nice day.
Kind regards,
Airless Discounter team
What kind of solvent you use for cleaning a Wagner 350 m after oil base paint ? And the oil for long storage can be either 10w30 or cooking oil ( olive oil ) ? Thank you in advance
Hi,
Please don't use any cooking oil for your machine. It is not a french fry machine.
You'll use some dissolvant you'll find in supermarket or DIY shops to clean it.
What important is for you to wash the pump inside with water after you used these products to clean the oil base paint. This way you'll protect you pump a little longer.
Kind regards,
Airless Discounter team
Airless Discounter International thank you for your information. So if I understand correctly is you clean first with the dissolvment and then with the water. As far as the cooking oil, it’s an advise from Wagner to use cooking oil or 10w30 for long storage. It is written on the manual of the product ( 350 m)
Thanks again you are doing great job !!!
@@alexpap708 you can also run distilled water with bit of antifreeze in it at the very end. Much the same for pressure washers too.
Can the Graco Pro LTS190 be used with FF LP or FF/LP
Only if you have the following tip holder : www.airless-discounter.de/Graco-RAC-X-Tip-Holder-for-Paint-Sprayers-246215
Kind regards,
Airless Discounter team
Does Graco sell HEA tips for X7?
Hi,
If you're talking about the gun SG2/SG3 given with the Magnum X7 pump, you just have to equip your gun with a RACX tip holder and then you'll be able to use the RACX LP and FFLP low pressure tips from Graco.
Kind regards,
Airless Discounter team
can I use RAC X with FFLP tip on Graco magnum prox19?
Yes, but you need a RAC X tip holder.
Hello, the one question I have is: what will be the difference on the same paint type when using Graco ltx517 vs lp517. Please let me know. Thank you.
Hi Edwin, the LP tip has a softer spray fan and allows you to spray with lower pressure. Which should result in less overspray.
I spray some efficengy apartments and I'm finding the 515 is just to big I was thinking of going down to a 3ff but should I go with a 310ff or a 312 ff
tantaluss68 310
@@georgegann2749 yea the 310ff is nice for doors and trim but the FF just doesn't do well with walls and ceilings I'm getting better with the 517 I would rather have a 310 non fine finish but i'm learning
Tips do not last anymore..be lucky too get 20 gallons
Please Hindi speak my help
Give him a few months to learn it and get back to you.
great presentation, with maybe some culture issues as i noticed. presenter just looks angry to me. IMHO
Let say he is often serious ;)
@@AirlessDiscounterInternational yeah i can see that, that's okay with me. reminds me of my father trying to get information in to my brain. LOL
Can I use a graco 211 tip on a Wagner?
Graco RAC V tips fit Wagner tip holder. Others as the RAC X tips do not fit.