2021 ZX-10R TST Fender Eliminator, Integrated Tail Light & Shogun Frame Sliders!

แชร์
ฝัง
  • เผยแพร่เมื่อ 5 ต.ค. 2024

ความคิดเห็น • 40

  • @felipe-nt-d
    @felipe-nt-d 3 ปีที่แล้ว +2

    Cool bike, I really like the TST stuff they put out for the Ninjas.

    • @StormtrooperRides
      @StormtrooperRides  3 ปีที่แล้ว

      Yeah its pretty good and I do like it but I really do prefer the Motodynamic setup which costs less and is more plug and play than TST. It irritates me that I have to change the flasher, Motodynamic has this all solved in the integrated tail light itself and you dont have to change anything. Also comes with license plate light which is a nice value add. Also Motodynamic is cheaper.

  • @S58PSHIFTING
    @S58PSHIFTING 3 ปีที่แล้ว +2

    I needed the three wire light connection visual that you skipped on shit.

  • @alaskanr6369
    @alaskanr6369 3 ปีที่แล้ว +2

    I just put the same light on my 2021 zx6r and the programmable taillight also effects how the taillight works when you press the brakes, I think there is 9 modes

    • @StormtrooperRides
      @StormtrooperRides  3 ปีที่แล้ว

      Yeah I discovered that after I played with it a bit and will try to address that in the final review. Sometimes I just get way out ahead of myself when these parts come in and I rush to get them on and recorded....I miss some details...and perhaps I dont read the instructions very well haha. I appreciate that insight and thank you!!

  • @williamwintemberg
    @williamwintemberg 3 ปีที่แล้ว +1

    Pretty Cool! I can't understand why the DOT insists on these ugly fenders! Almost all of them get ditched immediately by the first owner. Nice work!

    • @StormtrooperRides
      @StormtrooperRides  3 ปีที่แล้ว +1

      yeah I agree! you'd think though that the manufacturers would think that through a little though and design these tails with that in mind. I realize some people leave these things on but why not implement a quick release on these things and use a pressure contact or something to drive the electronics? Thanks William for dropping in and for your continued support!!

  • @hellraiserrec19
    @hellraiserrec19 3 ปีที่แล้ว +2

    Great video, new tail light and fender eliminator look great. Did you install the license plate light?

    • @StormtrooperRides
      @StormtrooperRides  3 ปีที่แล้ว

      Good catch, no I didn't. I thought it'd come with the setup but it does not. This is why I usually go with Motodynamic. No need to change out the flasher, all plug and play and they include the license plate light. Overall a much higher quality system and amazingly it costs quite a bit less also. TST's solution is "OK" and it works just fine, I like the looks of it...but if I had to do over again I'd go with Motodynamic! Thank you for the question!

  • @ScrapinDaily
    @ScrapinDaily 3 ปีที่แล้ว +1

    The tst relay is also adjustable. You just need to open it and turn the knob

    • @StormtrooperRides
      @StormtrooperRides  3 ปีที่แล้ว

      I honestly didn't know that, thank you for that information. You guys always teaching me something! Love it.

  • @SJMudTurtleCruises
    @SJMudTurtleCruises 3 ปีที่แล้ว +1

    Hopefully you have a battery tender on the battery so you don't have to go through all that craziness of taking off the seat to charge the battery!! 😂😂Didn't you know as soon as you start recording cars, kids, dogs and such start making noise 😂😂😂 Great Job the bike is looking good!

    • @StormtrooperRides
      @StormtrooperRides  3 ปีที่แล้ว +1

      Luckily I do have a tender on it so I've got that going for me haha. I love making vids in my garage but unfortunately when my neighbors see me out there they all decide to mow their lawns and some kind of public announcement gets made so that every car in my area drives down the street!!! Thanks SJ for the compliment on the bike. I'm still working through my love/hate relationship with this one :).

    • @SJMudTurtleCruises
      @SJMudTurtleCruises 3 ปีที่แล้ว

      @@StormtrooperRides I have one neighbor like that, they see the cameras come out and all the sudden have to do yard work or the kids start screaming really loud LMAO! I think with most bikes sometimes it's a love/hate relationship lol!

  • @kairohalfeti4386
    @kairohalfeti4386 ปีที่แล้ว

    Hello, question for TST rear light. Did you just use the relay and then installed the intergrade plug and play. Or do I need the extra hardness splitter. Not planning to install back the OEM turn signal. Thanks great video.

  • @blainehouser4354
    @blainehouser4354 3 ปีที่แล้ว

    Great Video! Thank You for Posting!

  • @g-moneyrides8341
    @g-moneyrides8341 3 ปีที่แล้ว +1

    Good vid Bro! That seat though...WTH? I can get mine off with 2 bolts.

    • @StormtrooperRides
      @StormtrooperRides  3 ปีที่แล้ว +1

      yeah on the 636 I can have both seats off in about 5 seconds with zero tools. While I appreciate Kawi sticking with the tool-less design, this is the worst seat I've personally had to deal with... I'd much rather have to pull a couple bolts then use this system. That little plastic piece will get worn in time not to mention super scratched up...already is honestly. I think they could have done better here. Thanks man for the comment and hopefully see you on the road soon!!!

    • @megatron7862
      @megatron7862 3 ปีที่แล้ว

      @@StormtrooperRides they should’ve jus stayed with the same design as the zx6r. Why change it and make it worse at that.

  • @strobegaming4981
    @strobegaming4981 3 ปีที่แล้ว +1

    Love the videos keep it up shes a beauty

    • @StormtrooperRides
      @StormtrooperRides  3 ปีที่แล้ว

      Thanks Strobe! More to come soon and I appreciate the support!

  • @estoylaroca
    @estoylaroca 3 ปีที่แล้ว +1

    Pulling the seat off looks like you're doing some sort of puzzle.

    • @StormtrooperRides
      @StormtrooperRides  3 ปีที่แล้ว

      RIGHT!!?? dumbest design I've ever seen. really shouldn't be that hard for any bike in my opinion. the whole rear end in fact is difficult to work on frankly! thanks though M-T for the feedback!!

  • @bmwrider1931
    @bmwrider1931 3 ปีที่แล้ว +1

    I have the baby sister of your bike. Man I love it. I was going to buy that same bike but then thought to myself when can I ever use all that power. And the truth is never unless I am running from the state trooper lol. But I love my 636 on the track. What exhaust will you go with?

    • @StormtrooperRides
      @StormtrooperRides  3 ปีที่แล้ว

      yeah MauiMan you are absolutely correct...for me this is just a love affair with these bikes. I know I'm not capable of riding any of the bikes we have to their performance potential BUT I love having the opportunity to ride them...sometimes fast 😁... and share them with you guys! Thank you for the comment and that 636 you have is indeed awesome! Exhaust news coming soon!!

  • @NoNegotiations
    @NoNegotiations 2 ปีที่แล้ว

    I hate single point frame sliders. Most likely when you drop it, it will brake it off, compare to 2 point frame sliders.

  • @HemiBurns
    @HemiBurns 2 ปีที่แล้ว +1

    Way easier to take that seat off than when you have to reinstall it.
    Ask me how I know.....lol

  • @joemaciasz2276
    @joemaciasz2276 2 ปีที่แล้ว

    Hey! Sweet video. Where are you located In Illinois??

  • @michaelb15
    @michaelb15 ปีที่แล้ว

    Question I applied 33lbs for the frame sliders and it seems it can go tighter. Is this normal?

  • @marksakamoto396
    @marksakamoto396 3 ปีที่แล้ว

    What is that blue, glue lock? Link pls for that item

  • @kboone122
    @kboone122 3 ปีที่แล้ว

    What's the name of your sliders and are they expensive.

  • @articcircleado
    @articcircleado 3 ปีที่แล้ว

    I love your channel.

  • @topx2698
    @topx2698 2 ปีที่แล้ว

    what's the decibel of the m4 gp19 exhaust?

  • @edwardcampbell3420
    @edwardcampbell3420 3 ปีที่แล้ว

    Are litre bikes less fun because of less shifting? Is my thought process wrong?

  • @leemsadventures1007
    @leemsadventures1007 3 ปีที่แล้ว +1

    Where did you order the parts from? Or do you have a link for the website to order the parts from?

    • @StormtrooperRides
      @StormtrooperRides  3 ปีที่แล้ว

      I ordered most of those parts from TST directly. tstindustries.com/kawasaki-ninja-zx10r-2021/ . The frame sliders I ordered off Amazon I believe and here is a link - amzn.to/3uSDoDV . Hope that helps and thank you for the question, sorry for the late reply.

    • @leemsadventures1007
      @leemsadventures1007 3 ปีที่แล้ว +1

      @@StormtrooperRides hell yeah thanks. Got everything installed except the frame sliders and exhaust. Just had 1st 600(560)mile service today.

    • @StormtrooperRides
      @StormtrooperRides  3 ปีที่แล้ว

      @@leemsadventures1007 Awesome! I am about to schedule mine on Monday! Grats on getting that done! Would love to hear your thoughts on the bike now that you have some miles on it! Take care!

  • @MrJosephbussy
    @MrJosephbussy 2 ปีที่แล้ว

    So Where did you get the tail light from TST?