Your cage hides inside there very nicely Brody! You might drill vent holes anywhere you will be sealing up the tube when it’s welded. I usually drill an 1/8” hole under where a tube will be welded. This hides the vent hole and vents the tube to the adjoining tube. This prevents pressure buildup and a weld blowing out just as you close up the joint. Awesome job!!
As I look at the bars next to the seats, I worry they might make getting in and out a little harder than necessary, especially as you get older. Maybe consider crawling in and out multiple times to see if it's troublesome. If it's any pain at all, it'll be a considerable pain in 10 years. Nows the time to make them less in the way if you're going to do it. Excellent work sir and sorry about the headliner. That blows, but I've seen worse.
Looking good Brody, nice job on the cage. Keep on forging ahead!
Your cage hides inside there very nicely Brody!
You might drill vent holes anywhere you will be sealing up the tube when it’s welded. I usually drill an 1/8” hole under where a tube will be welded. This hides the vent hole and vents the tube to the adjoining tube. This prevents pressure buildup and a weld blowing out just as you close up the joint.
Awesome job!!
Looking good! I can tell you're excited about your progress. You should be. It's really coming together.
You had me with the thump test on the Dynamat. 5 second decay?? YIKES!
Looking Good! Good things don't come easy!
As I look at the bars next to the seats, I worry they might make getting in and out a little harder than necessary, especially as you get older. Maybe consider crawling in and out multiple times to see if it's troublesome. If it's any pain at all, it'll be a considerable pain in 10 years. Nows the time to make them less in the way if you're going to do it. Excellent work sir and sorry about the headliner. That blows, but I've seen worse.
Nice work Brody 👍🏼
Getting close man, looking good
You may want to meticulously measure how your cage is laid out! I’m betting a lot of Nova guys will want one similar with how tight it fits!
Well done!