UPDATED method with ALL my latest tips and tricks in 1 video BELOW: Brisket - th-cam.com/video/1KB3PQy-Dn4/w-d-xo.html Pulled pork - th-cam.com/video/PNOwc3vdkxU/w-d-xo.html Ribs - th-cam.com/video/8_Dr7CtiRxM/w-d-xo.html Steak - th-cam.com/video/P1kbjad7M4U/w-d-xo.html Chicken - th-cam.com/video/_YuE6-MzhGo/w-d-xo.html
Hey James, your videos are very helpful, but if I can request you to add temps of the grill and internal food temps in either the bio or in the video itself so it’s easy to find would be very helpful. Thanks!
Fellow Canuck and dad of soon to be six. I've had a kamado for a year. What I learned through trial and error you touched on in 45 mins of video. I'm glad I found your channel. Keep on give'r.
I cannot wait. I ordered a brisket from white oak pastures, and it should be here by Saturday. Hope to grill it on Sunday. I'm keeping it simple with just the salt and pepper, drip tray, and spray bottle. You gave me the confidence to cook brisket.
I just got a KJ Classic 3 and followed this video to do my first cook, and my Brisket turned out amazing! Tender with a great smoke ring. Thanks for the video!
check out the chapters in this one - th-cam.com/video/1KB3PQy-Dn4/w-d-xo.html Have come up with a few improvements that make things easier in the recent years
And of course now that I’ve watched James cook a brisket on the Classic III, I will now make plans to visit Costco, procure a brisket, and try my hand at smoking one. I’ve learned a ton about cooking on a Kamado Joe classic from this channel, and everything I’ve cooked has come out fantastic. Great job!!!
Overt Enemy thanks for liking commenting and subscribing 🙏. I spray to (1) help any spots from drying out as the thickness is not the same in all parts and (2) the spray helps smoke adhere to the meat which helps build the bark flavour
Thanks for the reply. In my experience (being from Texas where we make these all the time) you don’t need to spray especially on the KJ. Next time you make one give it a shot without opening it up. No spray. No crutch. Love your videos dude \m/
New home/KJ owner. Loving your channel. Patient, insightful guidance and you have such a pleasant demeanor. Thanks a lot. Small Texas BBQ style brisket happening tomorrow for NFL Wk 1 after watching this.
Hello, great videos. Thanks for responding to the comments. I have a brisket flat. I trimmed the fat off the fat cap, but it looks like there is layer of meat under where I trimmed the fat cap which is different than the flat. I believe it is the deckle? Should I trim that off my flat or smoke it all together.
Hi James, great video, very informative. I am new to this and have noticed your grill wires look as if they have never been cleaned. That would suit me very well, please advise if you do ever clean them. Keep on cooking
Hi James, First brisket is going down this Sunday hope that with the help of your video and channel get an awesome result. I just have one question fat side up or fat side down? Thanks for sharing your knowledge on the kamado joe series!
skip the paper wrap (just the boat) , but this video has my latest evolution and i am really happy with the approach - th-cam.com/video/0rG5jaTAJH4/w-d-xo.html
I love that you sticked to the basics like Aaron Franklin. It's exactly the same as what I've been doing. I was looking for the brisket video using Kamado Joe grill not the offset smokers and you nailed it. Great quality, easy to follow step by step, two thumbs up. My only other comment is whether it would make the difference spritzing with water since Kamado tends to keep it moist anyways. Also I tend to like the butcher paper over foil, but I see that you added the broth so it makes sense. Please keep making awesome videos.
Thanks so much. I spritz more for smoke to adhere to the meat and keep the corners from drying out than for the overall moisture level as I agree the Kamado does great with this. Love paper when I am not adding broth. Appreciate you checking out the video
@@SmokingDadBBQ That makes sense. I will try that next time. Oh, by the way, where do you get your brisket? I've been getting from Costco but was wondering if there's any good recommendation that has more humanely raised w/o antibiotics
I have a big Joe II . Have question regarding temps. It seems that there is a 25 - 30 degree difference between the dome thermometer and a temp prob at grate height. Have you seen that? And do you cook by the dome thermometer?
I must have missed it but what rib rack is that what sized packer did you manage to fit? Also, I have some chopped up blocks of post oak (not quartered log pieces) - how many of these should I be burning through? I have B&B oak lump too that I'm considering using. Seems like you can't go wrong going Oak all the way. I don't have the slo-roller snd this will be my first long smoke on the KJ Classic I.
James, made my first brisket on the KJ Classic with the slowroller. Overall, it came out fantastic. Great smoke ring, tender and juicy. Only problem was early on due to the v-rack i used. The dome probe was actually hitting the meat, which was messing with my temperatures when using the IKamand. Ended up going manual. Thanks for all the tips.
thanks Jack. yes you have to watch your placement in the classic to avoid hitting. for large briskets I often have to use the second level on the rack vs the top in order to have clearance
Well done James!! I am from Texas and you nailed it! Just cooked one myself on the Big Joe this past Weekend. I have used tons of different seasonings and nothing beats just Salt and Pepper. Great job once again sir!
Brisket looking good! Im from Texas so I know all about Texas brisket. Quick questions, would this cook work on a komado joe classic 1. I know it doesn’t have some of the added accessories the newer models have. Thanks
you can do the same thing. I got the same smoke ring as the SloRoller by following these steps which would apply to you - th-cam.com/video/10l_vWRIV2c/w-d-xo.html
Hi James, Couple questions plz: You said you won’t use a drip pan on a slow roller because u don’t want to miss with air flow. Would you use it while using reflecting plates held on the accessory rack in the middle position in the Classic? When you start to spritz, how often and when to stop? I know you like to place wood under charcoal, is it ok to add one small chunk on top as well to start creating smoke right away until the one underneath kicks in? Should 3-4 chunks total be enough? Are you totally against water in drip pan for more moist and tender meat? Sorry for too many questions!
hey great questions. I have since found a round drip tray that is nearly the size of the SloRoller and doesn’t interfere with the air so I have been using that. it’s made by smoke ware. I don’t find the bark as good when using a water pan as it’s too humid, instead once the bark starts to set (say 90min) spray about every 60 min. you can also not spray it doesn’t make a huge difference if cooking below 240. I find you do want to spray at hotter temps like this one was at 270 1-2 tops 3 chunks on the bottom is plenty. don’t worry that will provide plenty of good clean smoke
Smoking Dad BBQ Really appreciate answering my question. Regarding the wood, I meant chunks not logs. So would you go with 3-4 in the bottom, or 3 bottom 1 top? Or you would go with less? I’m using post oak. Thank you.
I just got my Brisket seasoned and ready to go. How many lbs was this brisket? Thanks again for providing all the skills that give me all the accolades. nevermind found it in another comment. Love how you answer your comenters.
@@SmokingDadBBQ Thank you. that was kind. It came out very moist, beautiful smoke ring and flavor, however it was too tender and fell apart like a roast
Great video...I have cooked a few briskets with varying success. Couple questions .....will the cook time change if I don’t have a slo roller and also should I still put wood chunks under the charcoal (if I’m not using a slo roller)? Thanks for the info!
Crispin Sant thanks so much. I don’t think it will change too much but it’s a good question. The SloRoller circulates the air better so maybe it is a little faster. Without it I do the same with placing some wood on the bottom and adding charcoal on top
Great job James, that brisket looks picture perfect, nice and juicy, good smoke ring, beautiful bark. Smart idea using the v rack at the beginning. Take care and keep on grillin!
Nice video. I have a Kamodo, it is called flokamodo and I plan to make a brisket on this coming sat, Sept 26. Looking at some other youtube videos, I got the heat spreader plates. But whn I put the spreaders, it covers the full surface and I will not be able to even see the fire. Do you think it will cause any problem such as slow down the whole cooking process? I will see if I can upload a picture.
Thanks for this-many complaints online that u can’t do decent Brisket on a Classic, so thanks for proving wrong! I am days away from pulling the trigger on either a Classic 2 or 3. Still eternally obsessed by the “is the sloroller worth it” question...seems u are pretty convinced..?!
Thanks Hugo, this is the article that sealed the deal for me on the Classic 3 - www.engadget.com/2019-10-25-harvard-barbecue-desora-kamado-joe-cinder-grills.html
Smoking Dad - Do your temperature suggestions apply to Classic Joe II? I know in many of your videos you said you've found that for low and slow around 270 degrees F provides the best smoke.
Thanks so much, I really love it... makes easy work of smoke rings because of how it circulates the air. Check out this quick read - www.engadget.com/2019-10-25-harvard-barbecue-desora-kamado-joe-cinder-grills.html
Yes I do! I found an article on amazing ribs website that explained the science behind this and later saw a demo from Harry Soo who repeated some of the same science. My layman recollection of the key points is there is a sweet spot temp wise for great smoke. Too hot and you are open air burning, too cold and you are releasing toxins and the tase will come out like licking a tree. By placing the wood under the fire above cause the wood to smoulder and there isn't enough air for an outright open air burn. The smoke has to pass through the coals above that are ignited and burning cleanly which heats the air up to the sweet spot for that sweet smoke taste (i think it was around 450f) before that smoke makes its way up to your food. Once I tried it the first time I have never gone back
Doing a packer on my vision as I type this. This is packer #Idk with less than stellar results. Watched a few videos from different channels trying to figure out where I keep going wrong. Your method was the selection for today so I will post a reply to this after dinner with the results.
@@SmokingDadBBQ I just sliced it after letting it rest 3 hours. It is very good, a bit less juicy than I hoped but that's an easy fix. Spritz it more next time. Thank you for your video and taking the time to make it. Doing another one in 2 weeks and will post results.
James, I get quite a lot of dear guests on the weekend. I would prefer to have time with my guests so I was thinking on making a pulled beef using an Uruguayan brisket 2pcs à 2 kg. on my BJ3. Would I need a dutch oven? Any tips?
Oh wow! Bright and early cook for you! Looks like it was totally worth it! Damn good cook! Also i love your shirt at the end! Makes it feel bright like spring!
Looks delicious. I have a question: after you took out the V rack once the brisket had shrunk enough to fit flat on the grill grates, you rotated the brisket 90° with the thicker point end at the back. I’m guessing that’s because you feel the back portion of the cooking area of a Joe is hottest. Is that right?
Hi James, thank you for all the great content! I will be trying this cook this weekend and wanted to confirm with you that I got it right. We're shooting for 165F of internal meat temperature (about 5h cook time), before we cover in foil (+ broth) and shooting for 207F internal meat temperature (about 2h). Is that right?
I have done a few since this and modified my approach more in the last year than in the 10 before it and its paying off. i would follow this video instead which skips the broth. i would also skip the butcher paper wrap i show and just do the foil boat - th-cam.com/video/0rG5jaTAJH4/w-d-xo.html
The lump charcoal lasts for the entire duration? I’m looking to pick up a Kamado soon but don’t want to pull it apart to add more charcoal/wood while cooking. Thanks! Looks great!
James, aiming to follow your recipe for this coming Good Friday. Doing a six pound brisket. Roughly, how long would that take? Yours looked a fair amount bigger. Thanks!
depends on the temp, the small briskets are the most difficult so i would go as slow as possible, maybe 6 hours at 230f. this one was roughly 17lbs if i recall
Three questions. 1.) Do you have any opinon on pink butcher paper wrapping vs foil? 2.) Do you think putting the brisket in the cooler wrapped at 207 for a few hours without first letting it cool could cause it to overcook? 3.) Do you rely on your meater getting to 207 to consider it done vs testing for probe tender? Thanks as always
Ryan Duplex thanks Ryan. I switch back and forth but use foil most often. I found we have had great results so I haven’t started adding more rest before wrapping. But in summer I might. I removed the MEATER at 165 and then used probe feel from there
thanks Ralph. I don’t like them in a Kamado style cooker. so much moisture is being retained all you need is some spray to help the bark set, soak up some smoke and prevent any dry spots. in an offset I would absolutely follow the masters advice and use one
Hey James, I pretty much followed your instructions but could not get the tenderness. I wonder if the meat may have been the issue here (Costco briskets)
bummer. this brisket is from Costco, and I just did another one from Costco last week and it was equally tender. what temp were you getting in the point and the flat?
@@SmokingDadBBQ I believe I took it out at about 220 (I noticed you said 207 but as I poked it with a fork it was still not tender outside so I decided to keep it inside a bit longer). Another potential issue may have been the kamado being too hot at the beginning of the cook and I tried to cool it down. I cooked (again) a rack of ribs at the same time as the brisket using a grill extension and they came out delicious. I will definitely try again and will report back. Thanks for the info and keep up the great work you are doing!
Gorgeous brisket! I didn’t see you mention injecting the brisket. What are your thoughts about injecting? Also, what was your pre-trim/post-trim brisket weights? I’ve only done a couple of briskets, so I have a lot of dialing in to do.
tambs575 thanks for watching. I have move away from injecting. I salt brine almost everything except brisket which I find turns out better with just doing the salt and pepper an hour before it hits the grill. It sure, I will have to weight my next one before and after. They all come different so not sure there is a go to trim weight.
Thanks for the reply! Interesting about the injecting and brine. I’ll give your method a try on the next cook. Excellent video. The true testament to how good your brisket turned out was when your daughter poked her head around the corner as if to say ‘That smells sooo good! Turn off the camera so I can have some!’. 🤤
Looks great as always! When you increased the temp up to to 270 F and got the brisket to about 207 F - how long time roughly did that take? Having watched your other video "double indirect", I guess that this time it was fat cap down?
Great video. I’m so close to pulling the trigger on a Classic 3. Question: what’s the benefit of continually spraying vs. having a liquid (like cheap beer) poured in a tin / aluminum pan inside?
good question. I’ve found the steam never lets the bark set since there is constant excess humidity. whereas I found some spraying helps the smoke stick to the meat snd build the bark
@@SmokingDadBBQ thanks for the info. I've been watching your vids non-stop which...convinced me to buy a Classic 3 this past weekend! Been doing more reading and exploring in advance of the 3-4-week delivery lead time...So not thinking about the water in the kamado anymore, but for easy clean up and keeping the Kamado top-notch, what are your thoughts on drip pans?
@@SmokingDadBBQ nice! I look forward to your review. Any other reviews on your favorite gear would be helpful, too, aside from the list. I added the gloves via your affiliate link.
Smoking Dad BBQ this video you recommended temp 225. I then watched a video of yours on how the set your charcoals. In the comments a person stated having trouble getting the clean smoke at 225. You stated in the agreement and stated that you usually smoke slow and low, briskets, ribs etc at about 260- 270. For clarifications what’s the temp range to cook/smoke brisket
JTtribe04 thanks. No I don’t mess with the airflow so I just trim more fat off and then let the grill run at about 450 for a few min when done to burn off the drippings and we are good to go for the next cook
How much did this Brisket weigh? I’ve got a 15lbs going on the grill Saturday. I could only get wood chunk or hickory and applewood. How much wood do you recommend?
First brisket happens tomorrow morning, early! Still debating the foil vs butcher paper wrap! I like the addition of beef broth, so now I'm leaning towards the foil (I can hear my girlfriend now, "So why did you order the industrial-size pack of butcher's paper?"). Any last insight on which I should choose? Either way, thanks for all of your videos! You've help make owning a Kamado Joe even more enjoyable than I could have thought!
Thanks Kenny. Since doing this I have evolved my process a little more and i no longer wrap at 165 and I also no longer add liquid. Instead, I have found wrapping in the 185 range with butchers paper or foil works better for bark and the taste. wrapping on a cookie rack helps not have the brisket sitting in a pool of its own juices which hurts the bark ... paper breaths better so the sheet isn't needed
@@SmokingDadBBQ Fantastic! I'll use the paper and avoiding the scolding looks from my wonderful, and patient, girlfriend. Will wrap at 185 as well! Thank you!
So the temperature of the Kamado Joe was 165 for 7 hours and 270 for the remaining 2 hours? Did you use the meat thermometer temperature to determine any cooking times? Last, I have a 4lb flat....will they take less time? Thanks........Don Daddy
Yes I use a probe to keep an eye on things and then once i get up into 190's i remove the probe and start going on feel. That should cook much quicker. I would go 225 lower and slower and maybe consider some beef broth in the foil
Hi James, you have me really wanting a kamado joe! If I’m doing 3 briskets a year do you think I can get away with the classic Vs the big joe? Briskets are the only think I would really want the extra cooking space for. Thanks and keep up the great videos. Already have one picked out at our friends at embers down here in Colorado!
the classic can do a great brisket... the big joe makes it easier and you can do sides, but you can do briskets for sure on the classic 3 like this one was
@@SmokingDadBBQ excellent thank you! 1st brisket in progress, very excited. Temp seems to be coming up faster than expected.. relatively small brisket and i expect it to slow down as it approaches 165 before wrapping. Thanks for your vids and all the helpful info
So it’s cold as you know what here in Ottawa, ON right now and I have the slo-roller in, the KJ maintained grill temp but burned through charcoal like crazy (kJ XL) I couldn’t see that because of the slow roller. I wrapped am up to 175 now. There is a 110 degree difference between kJ thermometer and a Thermopop I have set up on the grill, luckily I’ve been using the pop all day
I am wondering how stable your temperature is. I seem to be struggling a bit controlling the temperature of mij KJ classic II. Sometimes I have it steady at 225F but then all of a sudden it starts rising to 250F-260F and I cannot control it anymore. Do you have any idea what the problem could be?
Thanks, and I feel your pain.... this used to drive me nuts until I finally realized it was how I was building my fire. Enclosed is a short video I did sharing my process, I now do overnight cooks without checking as it runs so steady. th-cam.com/video/L1qU89KAl-0/w-d-xo.html
yes cotton oven gloves with nitrile on the outside. not as good for high heat as my other gloves but plenty of protection for this heat level and clean for handling food
Appreciate the info. I was scalding my hands trying to emulate you. Meanwhile, need to keep learning because my brisket today did not develop that darkened bark. Hmm... Also, I ended up getting a 16" cake pan as my drip pan for the KJC3. It fits perfectly in the kamado, but certainly extends beyond the SloRoller by an inch, at least, on each side. Looking forward to what you share about your experience here.
Nice looking brisket. I have the same spray bottle. Lol. Where do you get packer brisket from? And how long was the total cook? Was thinking of doing one sometime soon.
Thanks for watching. this brisket was from Costco. I either go there or my butcher (JNG meats) depending on where we are. this was about 9 hours to cook and 2 to rest for 11 total
Hey James, I spritz water every hour and the temp spikes a little every time. By the time I pull to foil, the temp may have gone up 50 plus degrees. How do i prevent this?
A moment before you open the dome you can shut the bottom draft door completely which helps keep the fire from accelerating when you open the dome for a min to spray. After you spray close the dome and wait a moment and then put your door back in place
Looks great and really good video! How come you didn’t use the big Joe to the right in the video? Thought that would have fit the full brisket easily. Thinking of buying the Joe or Big Joe.
Awesome! I’m trying to figure out whether the Classic is big enough for my family of 7. Honestly, the brisket test is the biggest factor. So the V Rack trick made me hopeful. Do you have a link to that product?
Thank you! I’ve been really helped by your videos. Have you done one on just how much food/meat can be cooked at once on the Classic? I’m not really a grill the whole meal kinda guy. I typically just do the meat on the grill. But I’ve been surprised not to find an image or video anywhere with a visual of the capacity.
UPDATED method with ALL my latest tips and tricks in 1 video BELOW:
Brisket - th-cam.com/video/1KB3PQy-Dn4/w-d-xo.html
Pulled pork - th-cam.com/video/PNOwc3vdkxU/w-d-xo.html
Ribs - th-cam.com/video/8_Dr7CtiRxM/w-d-xo.html
Steak - th-cam.com/video/P1kbjad7M4U/w-d-xo.html
Chicken - th-cam.com/video/_YuE6-MzhGo/w-d-xo.html
Hey James, your videos are very helpful, but if I can request you to add temps of the grill and internal food temps in either the bio or in the video itself so it’s easy to find would be very helpful. Thanks!
Great suggestion!
And what were the temps here?
Many thanks from an ex-pat
Fellow Canuck and dad of soon to be six. I've had a kamado for a year. What I learned through trial and error you touched on in 45 mins of video. I'm glad I found your channel. Keep on give'r.
wow congrats on number 6. thanks for watching
Mannnnnn that brisket looks sooooo good! Love that I have to watch an ad to see this content, congratulations bro!
Thanks so much, hopefully wasn't too much of a hassle for ya lol
I cannot wait. I ordered a brisket from white oak pastures, and it should be here by Saturday. Hope to grill it on Sunday. I'm keeping it simple with just the salt and pepper, drip tray, and spray bottle. You gave me the confidence to cook brisket.
Have fun! you’ve got this
I just got a KJ Classic 3 and followed this video to do my first cook, and my Brisket turned out amazing! Tender with a great smoke ring. Thanks for the video!
Good stuff! so happy to hear you got the same results
Getting ready to do a first 10 ish hour brisket on the classic 3 some pointers for a first timer? Really love your video’s!
check out the chapters in this one - th-cam.com/video/1KB3PQy-Dn4/w-d-xo.html
Have come up with a few improvements that make things easier in the recent years
Must watch KJ videos:
KJ 101 (start here) - th-cam.com/video/x3nvkwmwuFw/w-d-xo.html
Top 10 KJ beginner mistakes - th-cam.com/video/gdcaOjQt_I0/w-d-xo.html
Dome alignment issue? - th-cam.com/video/qWM6mFkfnmI/w-d-xo.html
Top 5 KJ maintenance tips - th-cam.com/video/gphUQFW6uIo/w-d-xo.html
Don’t buy these accessories - th-cam.com/video/ORcbo6fTHmk/w-d-xo.html
Smoke wood secret - th-cam.com/video/2qtHrFjWY1U/w-d-xo.html
First 5 cooks for a new owner - th-cam.com/video/JA84ZvYL47Y/w-d-xo.html
Beautiful brisket you got there! Them boys in Texas would be proud of ya! Cheers
Cooking With CJ thanks so much
Love this guy he’s clear and enjoys what he does ps I did end up buying the meatstick plus set wifi
thanks, cheers
For Long smokes, is the slow roller necessar?
Was the 207 degree reference after foiled the internal target?
yes.... brisket can be probe tender from 195-211 ... this one was perfect at 207
And of course now that I’ve watched James cook a brisket on the Classic III, I will now make plans to visit Costco, procure a brisket, and try my hand at smoking one. I’ve learned a ton about cooking on a Kamado Joe classic from this channel, and everything I’ve cooked has come out fantastic. Great job!!!
thanks so much Cody
Good job dude. Why are you spraying it though?
Overt Enemy thanks for liking commenting and subscribing 🙏. I spray to (1) help any spots from drying out as the thickness is not the same in all parts and (2) the spray helps smoke adhere to the meat which helps build the bark flavour
Thanks for the reply. In my experience (being from Texas where we make these all the time) you don’t need to spray especially on the KJ. Next time you make one give it a shot without opening it up. No spray. No crutch.
Love your videos dude \m/
Overt Enemy thanks 🙏
Do you have a rule of thumb for wrap time vs internal temp increase in the foil?
yes in general its around 20f per hour gained in the wrap at 270f, often slower but i check with that gauge in mind
@@SmokingDadBBQ thanks for the info. I’m going to attempt my first brisket tonight!
Looking good James. I think everyone loves a great TEXAS brisket. Nice smoke ring.. tender... can't beat it! Take care James.
View to a grill thanks so much. Take care
New home/KJ owner. Loving your channel. Patient, insightful guidance and you have such a pleasant demeanor. Thanks a lot. Small Texas BBQ style brisket happening tomorrow for NFL Wk 1 after watching this.
awesome and thanks. enjoy the brisket
How do you clean your slo roller? Can I use a torch to carbonize the drippings and then scrape it off?
good question. Two ways .. first is preventing it with a drip tray and the second is turning the heat up after a cook to 400-425 and just burn it off
Hello, great videos. Thanks for responding to the comments. I have a brisket flat. I trimmed the fat off the fat cap, but it looks like there is layer of meat under where I trimmed the fat cap which is different than the flat. I believe it is the deckle? Should I trim that off my flat or smoke it all together.
you likely have some point meat getting progressively thinner ... no need to trim off
Do you need to wait at all before wrapping in a towel and putting into the esky so it stops cooking? Or can you put it straight in?
depends, if you think it needs another degree or two, wrap right away... if its on the money, wait 20min so that it doesn't cook past
What is the final temperature after its out on the grill after the foil? 207?
aim for 203 is the most common temp but it can range plus minus 5 degrees or more depending on the cut
Hi James, great video, very informative. I am new to this and have noticed your grill wires look as if they have never been cleaned. That would suit me very well, please advise if you do ever clean them. Keep on cooking
if they really need it I do scrape them but for the most part I treat them as self cleaning lol
@@SmokingDadBBQ A man after my own heart, thanks very much
Smoking a 12 pound brisket next Saturday. Joe at 225? How many hours from on Joe to out of the cooler? Thanks!
i did a 12lbs one on the video i just released this am. it was 9 hrs on the grill, 3 in the cooler for 12 total
good job dude! I can tell you got a little bit of juice in you by the end! good on ya. that's the way its done
love brisket
Would you recommend dry brining a brisket? I did it with pork and it was awesome! Thoughts?
brisket is the one thing I haven’t noticed a big upgrade. I think I need to do a side by side
Hi James, First brisket is going down this Sunday hope that with the help of your video and channel get an awesome result. I just have one question fat side up or fat side down? Thanks for sharing your knowledge on the kamado joe series!
skip the paper wrap (just the boat) , but this video has my latest evolution and i am really happy with the approach - th-cam.com/video/0rG5jaTAJH4/w-d-xo.html
If you were to use a drip pan, would you add water or would you be afraid that it would affect the way the fat renders?
no water needed, the kamado retains enough moisture... adding more ruins the bark
Great video! Where did you put the post oak in relation to the charcoal? Bottom? Middle of the charcoal?
Bob Steiner thanks bob. Right on the bottom running front to back dead centre then the charcoal on top
I love that you sticked to the basics like Aaron Franklin. It's exactly the same as what I've been doing. I was looking for the brisket video using Kamado Joe grill not the offset smokers and you nailed it. Great quality, easy to follow step by step, two thumbs up. My only other comment is whether it would make the difference spritzing with water since Kamado tends to keep it moist anyways. Also I tend to like the butcher paper over foil, but I see that you added the broth so it makes sense. Please keep making awesome videos.
Thanks so much. I spritz more for smoke to adhere to the meat and keep the corners from drying out than for the overall moisture level as I agree the Kamado does great with this. Love paper when I am not adding broth. Appreciate you checking out the video
@@SmokingDadBBQ That makes sense. I will try that next time. Oh, by the way, where do you get your brisket? I've been getting from Costco but was wondering if there's any good recommendation that has more humanely raised w/o antibiotics
giovannih78 Costco or JNG meats in Burlington is where I buy mine ... they source from local farms
Smoking Dad BBQ. Very cool. I’ll look that up. is that Burlington, WA by any chance?
Never mind. Ontario Canada...
Mouth is watering. Great cook and demo. I am looking forward to giving brisket a go on my Kamado Classic II.
Hope you enjoy
I just got a Brisket to smoke this weekend thanks for dropping the knowledge!!
Have fun!
When did you use the Sloroller insert?
it was installed the entire cook
Just had an idea 💡 For more room under the dome (brisket) why not use the BigJoetiiserrie minus the rotisserie part???
good idea. this was in the classic which would need the classic size. the downside is you lose your seal for high moisture retention
I have a big Joe II . Have question regarding temps. It seems that there is a 25 - 30 degree difference between the dome thermometer and a temp prob at grate height. Have you seen that? And do you cook by the dome thermometer?
yes there should be about a 20 degree difference. I go by the dome as I don’t always use probes
I must have missed it but what rib rack is that what sized packer did you manage to fit? Also, I have some chopped up blocks of post oak (not quartered log pieces) - how many of these should I be burning through? I have B&B oak lump too that I'm considering using. Seems like you can't go wrong going Oak all the way. I don't have the slo-roller snd this will be my first long smoke on the KJ Classic I.
James, made my first brisket on the KJ Classic with the slowroller. Overall, it came out fantastic. Great smoke ring, tender and juicy. Only problem was early on due to the v-rack i used. The dome probe was actually hitting the meat, which was messing with my temperatures when using the IKamand. Ended up going manual. Thanks for all the tips.
thanks Jack. yes you have to watch your placement in the classic to avoid hitting. for large briskets I often have to use the second level on the rack vs the top in order to have clearance
Have you noticed any difference between using foil vs. butcher paper for the first wrap? Great video. Thanks!
I like foil as it moves to the cooler better
what do you use to sharpen the slicing knife you got ? because mine needs to be sharpened and I don't no what to use on it.
its not perfect but i am using this - www.amazon.com/Work-Sharp-WSGSS-Sharpening-sharpening/dp/B00X9KU3GO
Well done James!! I am from Texas and you nailed it! Just cooked one myself on the Big Joe this past Weekend. I have used tons of different seasonings and nothing beats just Salt and Pepper. Great job once again sir!
BadCook77 thanks so much. Much appreciated
Brisket looking good! Im from Texas so I know all about Texas brisket. Quick questions, would this cook work on a komado joe classic 1. I know it doesn’t have some of the added accessories the newer models have. Thanks
you can do the same thing. I got the same smoke ring as the SloRoller by following these steps which would apply to you - th-cam.com/video/10l_vWRIV2c/w-d-xo.html
@@SmokingDadBBQ thanks!
Hi James,
Couple questions plz:
You said you won’t use a drip pan on a slow roller because u don’t want to miss with air flow. Would you use it while using reflecting plates held on the accessory rack in the middle position in the Classic?
When you start to spritz, how often and when to stop?
I know you like to place wood under charcoal, is it ok to add one small chunk on top as well to start creating smoke right away until the one underneath kicks in?
Should 3-4 chunks total be enough?
Are you totally against water in drip pan for more moist and tender meat?
Sorry for too many questions!
hey great questions. I have since found a round drip tray that is nearly the size of the SloRoller and doesn’t interfere with the air so I have been using that. it’s made by smoke ware.
I don’t find the bark as good when using a water pan as it’s too humid, instead once the bark starts to set (say 90min) spray about every 60 min. you can also not spray it doesn’t make a huge difference if cooking below 240. I find you do want to spray at hotter temps like this one was at 270
1-2 tops 3 chunks on the bottom is plenty. don’t worry that will provide plenty of good clean smoke
Smoking Dad BBQ Really appreciate answering my question.
Regarding the wood, I meant chunks not logs. So would you go with 3-4 in the bottom, or 3 bottom 1 top? Or you would go with less? I’m using post oak. Thank you.
Happy Good Friday, did the same for 2021 using your technique and advice.
excellent. happy Easter weekend
no meat on Good Friday boys
Do you use coarse kosher salt with your recipes/brine?
I use diamond kosher crystal salt
I’m planning on smoking a brisket using this method but I have a brisket that is only 3 pounds. Any recommendations on cook time and rest time?
small briskets are more difficult than full packers. I would keep a close eye on it after 4 hours of smoke
I just got my Brisket seasoned and ready to go. How many lbs was this brisket? Thanks again for providing all the skills that give me all the accolades. nevermind found it in another comment. Love how you answer your comenters.
hope the brisket was awesome, and thanks for watching and commenting
@@SmokingDadBBQ Thank you. that was kind. It came out very moist, beautiful smoke ring and flavor, however it was too tender and fell apart like a roast
Might be a dumb question, any ice in the cooler for the rest phase?
no such thing as dumb questions. no you want it to keep warm so you are using the cooler for it’s heat retention insulation properties
Great cook. What ratio do you use for your salt and pepper rub?
Thanks Heather, I went 50 / 50 (visually) in my shaker... just eyeballed it
Did you have to replace the coals at some point during the cook or did they last the whole time?
i tried running them to see how long they would go on one load of fuel..... 56 hours! So no need to add more fuel
This might be a dumb newbie question, but do you ever flip the brisket? Or do you just leave it fat-side-down the whole cook?
Great question, no flip necessary
Great video...I have cooked a few briskets with varying success. Couple questions .....will the cook time change if I don’t have a slo roller and also should I still put wood chunks under the charcoal (if I’m not using a slo roller)? Thanks for the info!
Crispin Sant thanks so much. I don’t think it will change too much but it’s a good question. The SloRoller circulates the air better so maybe it is a little faster. Without it I do the same with placing some wood on the bottom and adding charcoal on top
Great job James, that brisket looks picture perfect, nice and juicy, good smoke ring, beautiful bark. Smart idea using the v rack at the beginning. Take care and keep on grillin!
Pickles BBQ thanks so much have a great weekend
Nice video. I have a Kamodo, it is called flokamodo and I plan to make a brisket on this coming sat, Sept 26. Looking at some other youtube videos, I got the heat spreader plates. But whn I put the spreaders, it covers the full surface and I will not be able to even see the fire. Do you think it will cause any problem such as slow down the whole cooking process? I will see if I can upload a picture.
Hope you enjoy, so long as air can escape the firebox you should be ok
Great vid, thank you. I'm a noob. Besides spraying every hour can you put the bowl of water method? thanks
thanks for watching. no water needed in a pan on a Kamado which holds moisture better
@@SmokingDadBBQ thanks, do you have to change the coals at some time? I'm using Kingsford charcoal slow burn type
Raymond Li I am using lump charcoal so no need to add more mid cook
@@SmokingDadBBQ thanks your right, only had to fill that one time!
Thanks for this-many complaints online that u can’t do decent Brisket on a Classic, so thanks for proving wrong! I am days away from pulling the trigger on either a Classic 2 or 3. Still eternally obsessed by the “is the sloroller worth it” question...seems u are pretty convinced..?!
Thanks Hugo, this is the article that sealed the deal for me on the Classic 3 - www.engadget.com/2019-10-25-harvard-barbecue-desora-kamado-joe-cinder-grills.html
Smoking Dad - Do your temperature suggestions apply to Classic Joe II? I know in many of your videos you said you've found that for low and slow around 270 degrees F provides the best smoke.
yes, 270 tastes better in the classic 2 vs. 225 as well
Idk if you use one but is there an iPhone tri pod mount you ever used for Instagram pictures or videos
ryanpatrick16 yes I use an eBay camera holder mounted to a normal tripod
How does using the slo roller compare to not using one?
Thanks so much, I really love it... makes easy work of smoke rings because of how it circulates the air. Check out this quick read - www.engadget.com/2019-10-25-harvard-barbecue-desora-kamado-joe-cinder-grills.html
Thank you for this. Wood on the bottom is new to me. Do you do that for every smoke you do?
Yes I do! I found an article on amazing ribs website that explained the science behind this and later saw a demo from Harry Soo who repeated some of the same science. My layman recollection of the key points is there is a sweet spot temp wise for great smoke. Too hot and you are open air burning, too cold and you are releasing toxins and the tase will come out like licking a tree. By placing the wood under the fire above cause the wood to smoulder and there isn't enough air for an outright open air burn. The smoke has to pass through the coals above that are ignited and burning cleanly which heats the air up to the sweet spot for that sweet smoke taste (i think it was around 450f) before that smoke makes its way up to your food. Once I tried it the first time I have never gone back
Doing a packer on my vision as I type this. This is packer #Idk with less than stellar results. Watched a few videos from different channels trying to figure out where I keep going wrong. Your method was the selection for today so I will post a reply to this after dinner with the results.
How did it go?
@@SmokingDadBBQ I just sliced it after letting it rest 3 hours. It is very good, a bit less juicy than I hoped but that's an easy fix. Spritz it more next time. Thank you for your video and taking the time to make it. Doing another one in 2 weeks and will post results.
Just to clarify you went from the pit straight to the towel cooler? There was no peeking or venting?
I did spray with water if thats what you mean and to check for probe tender towards the end
James, I get quite a lot of dear guests on the weekend. I would prefer to have time with my guests so I was thinking on making a pulled beef using an Uruguayan brisket 2pcs à 2 kg. on my BJ3. Would I need a dutch oven? Any tips?
yes a DO is a great way to make shredded beef. I use a lodge 5qt
Oh wow! Bright and early cook for you! Looks like it was totally worth it! Damn good cook! Also i love your shirt at the end! Makes it feel bright like spring!
The Silly Kitchen with Sylvia haha thanks. I was tempted to wear a Hawaiian shirt to make it feel warmer lol
@@SmokingDadBBQ next video I expect a Hawaiian shirt!
The Silly Kitchen with Sylvia haha the next few I recorded already so it will be a while ... but soon
Do you have to mess with your fire often with a longer smoke on a Kamado?
Good question.... no you don't I have a video coming out soon to see how long the big joe would hold ~250f with a full basket..... it went DAYS
Smoking Dad BBQ that’s insane!!
Looks delicious. I have a question: after you took out the V rack once the brisket had shrunk enough to fit flat on the grill grates, you rotated the brisket 90° with the thicker point end at the back. I’m guessing that’s because you feel the back portion of the cooking area of a Joe is hottest. Is that right?
i find the fire burns that direction so thats why i oriented that way
What is the thing under he brisket called?
Hi James, thank you for all the great content! I will be trying this cook this weekend and wanted to confirm with you that I got it right.
We're shooting for 165F of internal meat temperature (about 5h cook time), before we cover in foil (+ broth) and shooting for 207F internal meat temperature (about 2h). Is that right?
I have done a few since this and modified my approach more in the last year than in the 10 before it and its paying off. i would follow this video instead which skips the broth. i would also skip the butcher paper wrap i show and just do the foil boat - th-cam.com/video/0rG5jaTAJH4/w-d-xo.html
The lump charcoal lasts for the entire duration? I’m looking to pick up a Kamado soon but don’t want to pull it apart to add more charcoal/wood while cooking. Thanks! Looks great!
Yes it does, no refills needed until after about 18hrs
@@SmokingDadBBQ interesting. so one piece of wood is enough for the whole cook?
James, aiming to follow your recipe for this coming Good Friday. Doing a six pound brisket. Roughly, how long would that take? Yours looked a fair amount bigger. Thanks!
depends on the temp, the small briskets are the most difficult so i would go as slow as possible, maybe 6 hours at 230f. this one was roughly 17lbs if i recall
@@SmokingDadBBQ Thanks! Did your leg of lamb recipe for the in-laws the other week. It was a hit!
Hi James, where do you get your pieces of wood? I am having hard time finding post oak and even more that size. Thnks
the amazon seller i used to use is gone, so i have been getting just oak from furtado farms
Three questions. 1.) Do you have any opinon on pink butcher paper wrapping vs foil? 2.) Do you think putting the brisket in the cooler wrapped at 207 for a few hours without first letting it cool could cause it to overcook? 3.) Do you rely on your meater getting to 207 to consider it done vs testing for probe tender? Thanks as always
Ryan Duplex thanks Ryan. I switch back and forth but use foil most often. I found we have had great results so I haven’t started adding more rest before wrapping. But in summer I might. I removed the MEATER at 165 and then used probe feel from there
Some suggest beer or water pan from the start to add moisture. Do you suggest or not? Saw on Aron franklin video.
thanks Ralph. I don’t like them in a Kamado style cooker. so much moisture is being retained all you need is some spray to help the bark set, soak up some smoke and prevent any dry spots. in an offset I would absolutely follow the masters advice and use one
Hey James, I pretty much followed your instructions but could not get the tenderness. I wonder if the meat may have been the issue here (Costco briskets)
bummer. this brisket is from Costco, and I just did another one from Costco last week and it was equally tender. what temp were you getting in the point and the flat?
@@SmokingDadBBQ I believe I took it out at about 220 (I noticed you said 207 but as I poked it with a fork it was still not tender outside so I decided to keep it inside a bit longer). Another potential issue may have been the kamado being too hot at the beginning of the cook and I tried to cool it down. I cooked (again) a rack of ribs at the same time as the brisket using a grill extension and they came out delicious. I will definitely try again and will report back. Thanks for the info and keep up the great work you are doing!
Gorgeous brisket! I didn’t see you mention injecting the brisket. What are your thoughts about injecting? Also, what was your pre-trim/post-trim brisket weights? I’ve only done a couple of briskets, so I have a lot of dialing in to do.
tambs575 thanks for watching. I have move away from injecting. I salt brine almost everything except brisket which I find turns out better with just doing the salt and pepper an hour before it hits the grill. It sure, I will have to weight my next one before and after. They all come different so not sure there is a go to trim weight.
Thanks for the reply! Interesting about the injecting and brine. I’ll give your method a try on the next cook. Excellent video. The true testament to how good your brisket turned out was when your daughter poked her head around the corner as if to say ‘That smells sooo good! Turn off the camera so I can have some!’. 🤤
tambs575 hahah she’s sneaky like that. So cute
Looks great as always! When you increased the temp up to to 270 F and got the brisket to about 207 F - how long time roughly did that take? Having watched your other video "double indirect", I guess that this time it was fat cap down?
I am not going to deviate from my latest double indirect fat cap up which was a 9 hour cook on the grill
Great video. I’m so close to pulling the trigger on a Classic 3. Question: what’s the benefit of continually spraying vs. having a liquid (like cheap beer) poured in a tin / aluminum pan inside?
good question. I’ve found the steam never lets the bark set since there is constant excess humidity. whereas I found some spraying helps the smoke stick to the meat snd build the bark
@@SmokingDadBBQ thanks for the info. I've been watching your vids non-stop which...convinced me to buy a Classic 3 this past weekend! Been doing more reading and exploring in advance of the 3-4-week delivery lead time...So not thinking about the water in the kamado anymore, but for easy clean up and keeping the Kamado top-notch, what are your thoughts on drip pans?
Daryl Lu I just got one from SmokeWare for this exact reason
@@SmokingDadBBQ nice! I look forward to your review. Any other reviews on your favorite gear would be helpful, too, aside from the list. I added the gloves via your affiliate link.
Daryl Lu thanks. Testing some new things for a nee video
What temperature was your Kamado
set at?
Thanks. I started this one lower at around 225f and then brought it up to 270f for the foil wrap
Smoking Dad BBQ this video you recommended temp 225. I then watched a video of yours on how the set your charcoals. In the comments a person stated having trouble getting the clean smoke at 225. You stated in the agreement and stated that you usually smoke slow and low, briskets, ribs etc at about 260- 270. For clarifications what’s the temp range to cook/smoke brisket
What is the temp prob & app you use?
thanks jonathan. it is this one - amzn.to/2YCXQMC
Do you ever use a drip pan with the sloRoller?
JTtribe04 thanks. No I don’t mess with the airflow so I just trim more fat off and then let the grill run at about 450 for a few min when done to burn off the drippings and we are good to go for the next cook
How much did this Brisket weigh? I’ve got a 15lbs going on the grill Saturday. I could only get wood chunk or hickory and applewood. How much wood do you recommend?
It was also 15 pre trim, i would guess 12 when done. I would do 1-2 of one wood, and 1 of the other (3 total). I would do 2 hickory, 1 apple
Thanks! This is day 7 of Kamado Joe III ownership, your videos have been very helpful!
How many pounds was this brisket? I’m just trying to plan on when to start cooking to aim to be done for the superbowl
it was about 17 pre trim
Where did you get the v rack? Looks like one I found for Primo, just wanting to add this to my collection...
Thanks, it looks like this will be the same / similar - amzn.to/2YWDUEn
First brisket happens tomorrow morning, early! Still debating the foil vs butcher paper wrap! I like the addition of beef broth, so now I'm leaning towards the foil (I can hear my girlfriend now, "So why did you order the industrial-size pack of butcher's paper?"). Any last insight on which I should choose? Either way, thanks for all of your videos! You've help make owning a Kamado Joe even more enjoyable than I could have thought!
Thanks Kenny. Since doing this I have evolved my process a little more and i no longer wrap at 165 and I also no longer add liquid. Instead, I have found wrapping in the 185 range with butchers paper or foil works better for bark and the taste. wrapping on a cookie rack helps not have the brisket sitting in a pool of its own juices which hurts the bark ... paper breaths better so the sheet isn't needed
@@SmokingDadBBQ Fantastic! I'll use the paper and avoiding the scolding looks from my wonderful, and patient, girlfriend. Will wrap at 185 as well! Thank you!
It would be nice if you showed how much wood you were using?
ok will do... classic likes 1-3 max chunks, big joe a single log that fits in the charcoal basket is ok
So the temperature of the Kamado Joe was 165 for 7 hours and 270 for the remaining 2 hours? Did you use the meat thermometer temperature to determine any cooking times? Last, I have a 4lb flat....will they take less time? Thanks........Don Daddy
Yes I use a probe to keep an eye on things and then once i get up into 190's i remove the probe and start going on feel. That should cook much quicker. I would go 225 lower and slower and maybe consider some beef broth in the foil
Hi James, you have me really wanting a kamado joe! If I’m doing 3 briskets a year do you think I can get away with the classic Vs the big joe? Briskets are the only think I would really want the extra cooking space for. Thanks and keep up the great videos. Already have one picked out at our friends at embers down here in Colorado!
the classic can do a great brisket... the big joe makes it easier and you can do sides, but you can do briskets for sure on the classic 3 like this one was
@@SmokingDadBBQ Thanks, that's what I was hoping to hear! Keep up the great work up north!
I see some people using butcher paper instead of foil, what do you think of that
I like foil for less mess in the towel in the cooler
@@SmokingDadBBQ excellent thank you!
1st brisket in progress, very excited. Temp seems to be coming up faster than expected.. relatively small brisket and i expect it to slow down as it approaches 165 before wrapping.
Thanks for your vids and all the helpful info
I’m 9.5hrs in stuck at 150...do I wrap it now?
Is the bark set? If so wrap away and maybe bump the temp a touch
So it’s cold as you know what here in Ottawa, ON right now and I have the slo-roller in, the KJ maintained grill temp but burned through charcoal like crazy (kJ XL) I couldn’t see that because of the slow roller. I wrapped am up to 175 now. There is a 110 degree difference between kJ thermometer and a Thermopop I have set up on the grill, luckily I’ve been using the pop all day
Which size Joe is that. I'm trying to decide which size I'd prefer and I noticed you had to bend the brisket to make it fit.
Thanks David. This is the Classic 3 (18”)
I am wondering how stable your temperature is. I seem to be struggling a bit controlling the temperature of mij KJ classic II. Sometimes I have it steady at 225F but then all of a sudden it starts rising to 250F-260F and I cannot control it anymore. Do you have any idea what the problem could be?
Thanks, and I feel your pain.... this used to drive me nuts until I finally realized it was how I was building my fire. Enclosed is a short video I did sharing my process, I now do overnight cooks without checking as it runs so steady. th-cam.com/video/L1qU89KAl-0/w-d-xo.html
There really is not a single difference in how things cook at 225-275. It might just be done quicker. 50° does not make or break a cook. Just fyi.
What gloves did you use to pick up the v-rack and brisket? Did you say nitrile gloves with a pair of cotton?
yes cotton oven gloves with nitrile on the outside. not as good for high heat as my other gloves but plenty of protection for this heat level and clean for handling food
Appreciate the info. I was scalding my hands trying to emulate you. Meanwhile, need to keep learning because my brisket today did not develop that darkened bark. Hmm...
Also, I ended up getting a 16" cake pan as my drip pan for the KJC3. It fits perfectly in the kamado, but certainly extends beyond the SloRoller by an inch, at least, on each side. Looking forward to what you share about your experience here.
Nice looking brisket. I have the same spray bottle. Lol. Where do you get packer brisket from? And how long was the total cook? Was thinking of doing one sometime soon.
Thanks for watching. this brisket was from Costco. I either go there or my butcher (JNG meats) depending on where we are. this was about 9 hours to cook and 2 to rest for 11 total
How long was the total cook time?
Thanks. It was about 9hr cook and 2 hour rest for a total of 11
Ok. I haven’t done a brisket in my classic joe in a while but I do know they cook faster than traditional offsets.
Good cook bro!
The Dawgfatha's BBQ thanks so much. Was really happy with this one
Hey James, I spritz water every hour and the temp spikes a little every time. By the time I pull to foil, the temp may have gone up 50 plus degrees. How do i prevent this?
A moment before you open the dome you can shut the bottom draft door completely which helps keep the fire from accelerating when you open the dome for a min to spray. After you spray close the dome and wait a moment and then put your door back in place
Smoking Dad BBQ that was super helpful, thank you! Trying your tritip method soon.
Looks great and really good video! How come you didn’t use the big Joe to the right in the video? Thought that would have fit the full brisket easily. Thinking of buying the Joe or Big Joe.
thanks so much. sadly just my camera. both are classic size
If you were to get a new one again would you go for the bigger size? Trying to decide between the two at the moment
I live.in Houston. Done brisket on my Masterbuilt, been thinking to do a small one on my Joe Junior
Thanks Shawn, would love to see the Jr. brisket
Awesome! I’m trying to figure out whether the Classic is big enough for my family of 7. Honestly, the brisket test is the biggest factor. So the V Rack trick made me hopeful. Do you have a link to that product?
Thanks Ryan, this looks to be the same as the one I have - amzn.to/3eZZ61t
Thank you! I’ve been really helped by your videos. Have you done one on just how much food/meat can be cooked at once on the Classic? I’m not really a grill the whole meal kinda guy. I typically just do the meat on the grill. But I’ve been surprised not to find an image or video anywhere with a visual of the capacity.
Ryan Bishop thanks Ryan. I haven’t done a video but I think I have a few photos that show what you’re asking for on my instagram page
Bonuspoints for the Dirtfish Hoodie! Are you a rally driver, too?
hahah you might be the first person ever to recognize that sweater logo and know what it means
@@SmokingDadBBQ So what does it mean to you?
That jiggle, That bark. WOW, nice job brother.
The Gallery Backyard BBQ thanks so much
Good looking brisket! Nice how you made it fit in the classic!
Beers-Jack of BBQ thanks so much. Needed to be a little creative for a 22” brisket on an 18” grid lol