This fan DOES wobble

แชร์
ฝัง
  • เผยแพร่เมื่อ 23 ธ.ค. 2024

ความคิดเห็น • 455

  • @hobbycentral3516
    @hobbycentral3516  ปีที่แล้ว +7

    THE THIRD PULLCHAIN IS FOR REVERSE!!!!!!!!!!!!!!!!!!!!!!!! idk it a canada thing

    • @CRAIG86
      @CRAIG86 10 หลายเดือนก่อน +1

      why cant it just be a swich like a normal fan?!?!?!

    • @hobbycentral3516
      @hobbycentral3516  10 หลายเดือนก่อน +1

      @@CRAIG86 I'm assuming Because a chain is way easier to reach than a switch that you need to set up a chair or a ladder to reach

    • @CRAIG86
      @CRAIG86 7 หลายเดือนก่อน

      ​@@hobbycentral3516just stand on your bed

    • @xangriffin8564
      @xangriffin8564 7 หลายเดือนก่อน

      Where was the fan made

    • @AdamTheSEMichiganFanGuyEtc
      @AdamTheSEMichiganFanGuyEtc 3 หลายเดือนก่อน +1

      @@xangriffin8564if I would have to assume Canada.

  • @Sirawesomej904
    @Sirawesomej904 ปีที่แล้ว +6

    0:56 "Da da da oh don’t mind my fan!" Got me rolling on the floor laughing. Lol😂

  • @tomcollett1893
    @tomcollett1893 4 ปีที่แล้ว +7

    Naturally, the reason ceiling fans wobble like that is when the blades aren't fully aligned, which causes that rotational imbalance. Even if one of the blades was slightly out of alignment (as in a few millimetres), that can still happen. One way of finding out which blade is out of alignment is you start the fan up for a few seconds and then turn it off, and then go and stand somewhere where you can align your eyes with the tips of the blades and the corner of the ceiling, standing as still as possible. You should be able to identify which one of the blades is slightly out of alignment and then you'd be able to straighten it.

  • @dannycubesnfansproductions3217
    @dannycubesnfansproductions3217 2 ปีที่แล้ว +4

    Nadair: i'm going to make the Canarm Unity and the Galaxy's blades wobble
    Canarm Galaxy: HOW DARE YOU NADAIR
    Canarm Unity: WHY DO YOU WANT OUR BLADES WOBBLE?
    Nadair: because is for fun
    The two Canarms: THAT'S IT! I'M TELLING SOMEONE TO TURN YOU OFF!

    • @Account-mc8sr
      @Account-mc8sr ปีที่แล้ว

      Nadair: NOOOOOOOOOOO!!!!!!!

    • @danielelproxd8244
      @danielelproxd8244 11 หลายเดือนก่อน

      The two canarms:YESS WILL CALLING TO OFF you >:)

  • @Zsullivan27
    @Zsullivan27 3 ปีที่แล้ว +7

    0:59 I don’t know why but this part makes me laugh every time. 🤣 LOL

  • @supermarnies
    @supermarnies 9 ปีที่แล้ว +12

    The Other 2 Fans are Like:... WTF.

    • @seth6525
      @seth6525 5 ปีที่แล้ว +1

      ikr XD

  • @ltg6686
    @ltg6686 ปีที่แล้ว +1

    What is with the 3 pull chains

  • @pcorf
    @pcorf 5 ปีที่แล้ว +3

    One of the blades is badly out of alignment because of bent blade holders. Maybe before you installed the fan, the fan was stored blades down and over time it warped the blade holder.

  • @taronjeroneharris1313
    @taronjeroneharris1313 4 ปีที่แล้ว +2

    If you straighted up that one blade on there, that should cut down on the wobbling. The reason why it's doing that is because with that blade being bent like it is, it's causing the fan to be out of balance. Other than that's it runs good.

    • @hobbycentral3516
      @hobbycentral3516  4 ปีที่แล้ว

      No it wobbles because it's cursed! lol check it out with new brackets in this newer video of it th-cam.com/video/EHVtlvVMbQI/w-d-xo.html

  • @aaronsceilingfansspeakersa3057
    @aaronsceilingfansspeakersa3057 27 วันที่ผ่านมา

    That fan was rapping "wobble baby wobble baby wobble baby wobble!" 😂😂😂😂😂

  • @AdamTheSEMichiganFanGuyEtc
    @AdamTheSEMichiganFanGuyEtc 3 หลายเดือนก่อน +2

    I’ve remember watching this when I was little this is so funny 😂😂😂😂

  • @gqinc1202
    @gqinc1202 6 ปีที่แล้ว +4

    i think i see the problem
    the fan has an extra pull chain on the light kit

    • @seth6525
      @seth6525 5 ปีที่แล้ว +1

      OH YEAH WHY DIDN'T I THINK OF THAT?! XD

  • @REALMichael2011
    @REALMichael2011 3 ปีที่แล้ว +4

    Is that an attic fan?

  • @dkintana
    @dkintana 8 ปีที่แล้ว

    Why are the blades going from left to right?
    December 3 2016

  • @dkintana
    @dkintana 8 ปีที่แล้ว +2

    What Type Of Ceiling Fan Is That?
    December 3 2016

  • @roshanr16896
    @roshanr16896 4 ปีที่แล้ว +2

    Why does it have 3 pull chains

  • @victorlitwinko9502
    @victorlitwinko9502 4 ปีที่แล้ว +14

    0:46 sounds like a train

  • @Kasey1776
    @Kasey1776 7 ปีที่แล้ว +9

    That’s balanced very well!

    • @hobbycentral3516
      @hobbycentral3516  7 ปีที่แล้ว +5

      I know right!

    • @Kasey1776
      @Kasey1776 7 ปีที่แล้ว +2

      What kind of fan is that by the way? It’s a nice fan.

    • @hobbycentral3516
      @hobbycentral3516  7 ปีที่แล้ว +3

      It's a Nadair . I don't know the model name/number. It doesn't have any stickers on it.

    • @Kasey1776
      @Kasey1776 4 ปีที่แล้ว +1

      Yes

    • @firealarmtechguy4444
      @firealarmtechguy4444 4 ปีที่แล้ว

      @@hobbycentral3516 Encon Princess Knockoff

  • @ACFC.1000
    @ACFC.1000 4 ปีที่แล้ว +3

    Do a video of the same thing but the really bent looking heritage ceiling fan

  • @michellereyes3759
    @michellereyes3759 3 ปีที่แล้ว +15

    whats are the 3 pullchains for?

    • @hobbycentral3516
      @hobbycentral3516  3 ปีที่แล้ว +6

      3rd Pullchain is for reverse.

    • @susansuper7377
      @susansuper7377 3 ปีที่แล้ว +3

      @@hobbycentral3516 p n⁰⁰o

    • @fansandvintage2008
      @fansandvintage2008 3 ปีที่แล้ว +4

      @@hobbycentral3516 I love those 3 pull chain fans

    • @dogsareawesome9197
      @dogsareawesome9197 3 ปีที่แล้ว +3

      @@fansandvintage2008 the only one of those i seen is at my aunts house.

    • @S1LLY_MAST3R_SHAK3_L0VER
      @S1LLY_MAST3R_SHAK3_L0VER 2 ปีที่แล้ว +3

      I used to have a 3 pullchain fan…but we got rid of it because it kept making us sneeze a little bit when some dust flies off it…but if you wanna know what the third pullchain is for, I’ll tell you…since this was a fan from a long time ago (which it looked like), which means it was a fancy fan or a Casablanca or something idek. But it had an upper light on it and that is what the 3rd pullchain is for. (For…Some reason…we never got to change the lightbulbs in the upper light area…just left it blank)

  • @livionaves
    @livionaves 9 ปีที่แล้ว +5

    That fan has a terribly bent up blade, no wonder the wobble is so bad. It has stencil blades? What is the name of this fan?

    • @hobbycentral3516
      @hobbycentral3516  9 ปีที่แล้ว +1

      +Maverick 3458 Yeah I didn't make sure they were balanced when I glued them lol. No the blades don't have any stencil, and It's a Nadair something or other, I cant remember the model number

    • @Ceilingfans94
      @Ceilingfans94 8 ปีที่แล้ว

      +Hobbycentral LYER!!!!!!!😡😡😡

    • @TravellerCarlos
      @TravellerCarlos 8 ปีที่แล้ว +1

      +AdamTubefans47 Did You Mean Lier?

    • @ThatTexanCollector
      @ThatTexanCollector 8 ปีที่แล้ว +3

      Both 'y'all wrong it's Liar

  • @tyronlemons5203
    @tyronlemons5203 2 ปีที่แล้ว +1

    2:09 "my light doesn't like the wobbly fan" most fans are like that mine for example I'd have to replace the bulb in about a month and the other ones are fine and I have a harbor breeze Mayfield

    • @mollyballiet1407
      @mollyballiet1407 5 หลายเดือนก่อน

      What’s the finish of your harbor breeze mayfield

  • @CB-170Thespamchecker
    @CB-170Thespamchecker 4 หลายเดือนก่อน

    0:58 That fan on the back having a seizure while the man is singing. LOL

  • @dkintana
    @dkintana ปีที่แล้ว

    What does the thrid pull chain do on the ceiling fan?
    November 3 2023

    • @hobbycentral3516
      @hobbycentral3516  ปีที่แล้ว +1

      3 words. R e a d T h e D e s c r i p t i o n =D

  • @HVACVIDS-k7w
    @HVACVIDS-k7w 11 หลายเดือนก่อน +1

    You will need a new blade set as well as you will need to tighten the fan

  • @TheBritishairways747_aviation
    @TheBritishairways747_aviation 5 หลายเดือนก่อน +1

    0:56 da da da oh don’t mind my fan!
    Other 2 fans: what the hell is going on?!

  • @brentfisher902
    @brentfisher902 3 ปีที่แล้ว +2

    You should overclock the motor and put car balancing weights on it to make it wobble so quickly it falls off the ceiling.

    • @hobbycentral3516
      @hobbycentral3516  3 ปีที่แล้ว +4

      That would actually be pretty entertaining!

    • @Account-mc8sr
      @Account-mc8sr ปีที่แล้ว

      But that would break it don’t

  • @ZappingHero
    @ZappingHero 10 ปีที่แล้ว +1

    0:40 - 0:55 lol, I remember doing that on my video of my Hampton Bay Farmington controlled by the slide dimmer (back in June of 2011), only I did just regular, sped-up and slow-down on my file (I took when I accidentally broke the chain off).

    • @hobbycentral3516
      @hobbycentral3516  10 ปีที่แล้ว

      lol I remember that vid, and yeah I liked how it sounded slowed down twice

    • @ZappingHero
      @ZappingHero 10 ปีที่แล้ว

      Oh and I like the effects at the end too, lol. :D

    • @hobbycentral3516
      @hobbycentral3516  10 ปีที่แล้ว

      ZappingHero yeah I thought I would do something to make my vids stick out a little, so I thought I would throw in trippy stuff like tht lol

  • @jackwiley7961
    @jackwiley7961 6 ปีที่แล้ว +43

    0:59Told you we shouldn't have let him come over.

    • @silent7563
      @silent7563 6 ปีที่แล้ว

      Jack Wiley LMAO

    • @seth6525
      @seth6525 5 ปีที่แล้ว

      XD

    • @Turbofanman13
      @Turbofanman13 4 ปีที่แล้ว +1

      Charlam galaxy: dude why is he here
      SMC Laguna: he wanted to come over
      Encon princess: y7stsyray7tstisyodsr

    • @anshitaa.srivastava100
      @anshitaa.srivastava100 4 ปีที่แล้ว

      Thanks

    • @seth6525
      @seth6525 4 ปีที่แล้ว

      @@Turbofanman13 XD

  • @LuckyTheWolf69420
    @LuckyTheWolf69420 5 ปีที่แล้ว +17

    Imagine that fan on a downrod!😨

  • @Tylergage07Productions
    @Tylergage07Productions 4 ปีที่แล้ว +4

    This video has aged like fine wine

  • @randomperson7443
    @randomperson7443 ปีที่แล้ว

    What model fan is in between the other two? My grandma had a fan like it that fell down in her bedroom, except hers was brown.

    • @hobbycentral3516
      @hobbycentral3516  ปีที่แล้ว +1

      That is a Canarm Unity. it fell? hopefully it wasnt on top of her bed

    • @randomperson7443
      @randomperson7443 ปีที่แล้ว

      She also had the 3 Chain fan in her dining room, but hers only had 2

  • @mtgau2000
    @mtgau2000 5 ปีที่แล้ว +3

    LOL THE CEILING FAN WOBBLES BECAUSE ONE OF THE BLADES BENT UP BUT WAIT I LIKE YOUR VIDEOS

  • @Gambonnerfans
    @Gambonnerfans 4 ปีที่แล้ว +3

    I wanna see this thing on a down rod with no set screws

  • @aliciajones1035
    @aliciajones1035 4 ปีที่แล้ว +5

    lol that wobbles like crazy

  • @jacksonproducedit352
    @jacksonproducedit352 10 ปีที่แล้ว +4

    That is one messed up fan right there.i am glad that's not in my house

    • @hobbycentral3516
      @hobbycentral3516  10 ปีที่แล้ว

      Yeah it's quite a hazardous unit. The funny thing is I used it for probably a month on low after this video and the blades never fell off, but when I went back into that shed in the fall two blades were snapped off and laying on the floor.

    • @katthefanenthusiast5793
      @katthefanenthusiast5793 10 ปีที่แล้ว

      Hobbycentral !

    • @jazziegee5964
      @jazziegee5964 10 ปีที่แล้ว

      Hobbycentral you should get a Hampton bay glendale

    • @katthefanenthusiast5793
      @katthefanenthusiast5793 10 ปีที่แล้ว

      He could have pput a better fan there.

    • @hobbycentral3516
      @hobbycentral3516  10 ปีที่แล้ว

      Kat Fan I definitely could have, But I wanted to see how good the jb weld would hold up.

  • @torythefanman
    @torythefanman 9 ปีที่แล้ว +26

    Surprised it did not fly off there..LOL

    • @hobbycentral3516
      @hobbycentral3516  9 ปีที่แล้ว +4

      ***** Lol I was surprised none of the blades flew off lol They just randomly fell off while it was sitting unused during the summer, I walked in to get something and they were just sitting on the floor.

    • @torythefanman
      @torythefanman 9 ปีที่แล้ว +3

      LOL! wow. thats funny.

    • @GoneForGood22
      @GoneForGood22 7 ปีที่แล้ว +2

      look at ryan's bar and grill there's is 10X as bad as this

    • @seth6525
      @seth6525 5 ปีที่แล้ว

      @@hobbycentral3516 good thing the fan was off becuz if i t wasn't (X_X)

    • @catsbyondrepair
      @catsbyondrepair 4 ปีที่แล้ว

      Jb weld sucks

  • @theceilingfanguy4041
    @theceilingfanguy4041 7 ปีที่แล้ว +1

    can you make a nother vid of this fan and make it reverse

    • @hobbycentral3516
      @hobbycentral3516  7 ปีที่แล้ว +3

      I would, but 2 of the blades broke off and I'm not brave enough to run a ceiling fan with jb welded blades anymore lol

  • @therealbowser3339
    @therealbowser3339 7 ปีที่แล้ว +13

    It's the most balance fan in the world

  • @fansandvintage2008
    @fansandvintage2008 3 ปีที่แล้ว +2

    I love fans that have a reverse chain

  • @vthplumbing2280
    @vthplumbing2280 4 ปีที่แล้ว +4

    duh, duh, duh, duh duh o don't mind my fan! 0:59 friends come over shaking in happeiness

  • @REALMichael2011
    @REALMichael2011 3 ปีที่แล้ว +5

    This is like my old Ceiling fan that I had since I moved in my house One day it was leaning when I was sleep and in the morning I took it down and got a new fan in my room Then I put the old fan and hooked it up in the garage and it works!

  • @ilovefans-x1m
    @ilovefans-x1m 11 หลายเดือนก่อน

    Grayton?

  • @wesleysceilingfanjoint5255
    @wesleysceilingfanjoint5255 6 ปีที่แล้ว +3

    Even though it's so wobbly it's kind of nice fan

  • @conorodonnell8142
    @conorodonnell8142 4 ปีที่แล้ว +1

    The ceiling fan is so wobbly because the blade is bent and the light kit globe is shaking on the ceiling fan. And the ceiling fan pull chains are banging onto the ceiling fan fan light kit globe.

  • @thatretrocattt
    @thatretrocattt 5 ปีที่แล้ว +3

    That does look quite unsafe to be honest.

  • @bryanwithlANDN
    @bryanwithlANDN 4 ปีที่แล้ว +1

    Do you still have that in 2020?

    • @hobbycentral3516
      @hobbycentral3516  4 ปีที่แล้ว

      Yeah I made a video of it this sprig fixed and cleaned up

    • @bryanwithlANDN
      @bryanwithlANDN 4 ปีที่แล้ว

      Oh

    • @bryanwithlANDN
      @bryanwithlANDN 4 ปีที่แล้ว

      Why is there 3 pull chains

    • @hobbycentral3516
      @hobbycentral3516  4 ปีที่แล้ว

      @@bryanwithlANDN old canadian ceiling fans have pullchains for reverse

    • @bryanwithlANDN
      @bryanwithlANDN 4 ปีที่แล้ว

      Oh that’s so cool

  • @alyssaschannel699
    @alyssaschannel699 6 ปีที่แล้ว

    What's a there pull chain on the fan you didn't touch

    • @hobbycentral3516
      @hobbycentral3516  6 ปีที่แล้ว +3

      Thats the self destruct pull chain
      jk it's for reverse

  • @jyancofans7764
    @jyancofans7764 6 หลายเดือนก่อน +10

    who watching 2024 (lol)

  • @FanOfCars2006
    @FanOfCars2006 5 ปีที่แล้ว +3

    Wow three pull chains pretty rare.Mostly they would have one or two

    • @PorterTheFanCollector
      @PorterTheFanCollector ปีที่แล้ว

      The other was the reverse chain. They were used before the switch was invented.

  • @samlarkin1810
    @samlarkin1810 9 ปีที่แล้ว +14

    I once had an industrial fan in my room and it was literally hanging by the wires it was so wobbly that the people that moved in afterwards didn't know that it was so wobbly that it fell down.

    • @S1LLY_MAST3R_SHAK3_L0VER
      @S1LLY_MAST3R_SHAK3_L0VER 2 ปีที่แล้ว +1

      Oof…that must’ve been terrible…did they get a new fan? Because when one of mine fell I got a replacement fan

  • @silasbishop08
    @silasbishop08 4 หลายเดือนก่อน +1

    You need to fix a blade because its touching the wood

  • @Vacuum-fan-2315
    @Vacuum-fan-2315 ปีที่แล้ว

    If u were wondering the third chain is for reverse and forward

  • @isaiahcammack9020
    @isaiahcammack9020 3 ปีที่แล้ว

    What brand is this?

  • @CajunBeauty1
    @CajunBeauty1 7 ปีที่แล้ว +1

    does this fan have new blades yet?

    • @hobbycentral3516
      @hobbycentral3516  7 ปีที่แล้ว +1

      No I haven't came across any blades brackets yet.

  • @Varkyorsomethingstupid9963
    @Varkyorsomethingstupid9963 10 หลายเดือนก่อน +1

    Remember when this video was called this fan doesn’t wobble

  • @tylonbarnes9678
    @tylonbarnes9678 9 ปีที่แล้ว

    ey one of the blades kept going up and down why is that?

    • @hobbycentral3516
      @hobbycentral3516  9 ปีที่แล้ว +1

      +Tylon Barnes Because they are horribly off balance lol

  • @washing_machine_guy
    @washing_machine_guy 9 ปีที่แล้ว

    I saw a couple of blades were higher than the other

  • @retroelectronicnerds9482
    @retroelectronicnerds9482 6 ปีที่แล้ว +2

    nice that you woundnt need to get a stool and reach up on the side of the fan to switch it. When people actually have good ideas...

  • @connermichel837
    @connermichel837 9 ปีที่แล้ว +11

    That too wobbly

    • @MogamiK32
      @MogamiK32 7 ปีที่แล้ว

      Conner Michel I think that's an encompass princess from 1984

    • @connermichel837
      @connermichel837 6 ปีที่แล้ว

      PineappleTurddle But with different blades, light shade, and Blade braket

  • @joshd8624
    @joshd8624 8 ปีที่แล้ว +1

    old fan?

  • @CajunBeauty1
    @CajunBeauty1 7 ปีที่แล้ว

    what does the third pull string do?

  • @SunshineRoblox-ch4up
    @SunshineRoblox-ch4up 7 ปีที่แล้ว +3

    wow the fan shakes too hard that it causes the other fans to wobble too☺

  • @b1uesi1ver66
    @b1uesi1ver66 4 ปีที่แล้ว

    minigun?

  • @tpirman1982
    @tpirman1982 9 ปีที่แล้ว +1

    That's very wobbly.

  • @redacted2051
    @redacted2051 3 ปีที่แล้ว

    is there one for sale? i need one for my bedroom

    • @hobbycentral3516
      @hobbycentral3516  3 ปีที่แล้ว

      None of mine are for sale, if that's what your asking. If your wondering if there is one for sale somewhere on the internet, I dont know lol. plus if you dont live in canada, then you probably wont be able to find a Nadair unless you pay a probably insane amount of shipping. Although if you just like the style and dont care about the brand, then I believe hampton bay made a model like this. the greytyon I think?

    • @hobbycentral3516
      @hobbycentral3516  3 ปีที่แล้ว

      Update: I goofed up there, I meant Encon Princess, not hampton bay grayton

  • @MrBonanza747
    @MrBonanza747 3 ปีที่แล้ว +2

    0:49 the fan song

  • @dkintana
    @dkintana 8 ปีที่แล้ว +1

    2:11 My light doesn't like the wobbly fan.
    December 3 2017

  • @joshd8624
    @joshd8624 8 ปีที่แล้ว +2

    don't worry guys it won't fall!

    • @seth6525
      @seth6525 5 ปีที่แล้ว +2

      yeah totally!

  • @lennongroover4189
    @lennongroover4189 5 ปีที่แล้ว +1

    You need to just carefully bend the blade down with out breaking it or just replace the whole blade

    • @hobbycentral3516
      @hobbycentral3516  5 ปีที่แล้ว +1

      I have long since got new brackets for it lol

  • @emmanuelyates678
    @emmanuelyates678 ปีที่แล้ว +1

    It probably need need a glued on the ceiling fan from wobbling

  • @spirit861
    @spirit861 3 ปีที่แล้ว

    I didn’t know how the fan could wobble the blades on that other Hampton Bay Littleton I THINK

    • @hobbycentral3516
      @hobbycentral3516  3 ปีที่แล้ว

      It was shaking the beam that all those ceiling fans were mounted to. the beam was actually barely even nailed down lol. just so you know, the other smaller ceiling fan is a Canarm Unity, and the other larger fan is a Canarm PF-42

  • @danielelproxd8244
    @danielelproxd8244 11 หลายเดือนก่อน

    Fan 1:im bored i have an idea i play the wobbly fan
    Fan 2:Wobbly fan?!!??
    Fan 3: WHAT??!!!
    Fan 1: ON ME PLASE
    ONE SECONDS LATER...
    Fan 2 and Fan 3: THATS IT !!!! WILL OF YOU!!!
    Fan 1: NOOOOOO!!!!!!!

  • @LuckyTheWolf69420
    @LuckyTheWolf69420 5 ปีที่แล้ว +17

    Now that's what I call Walmart quality!!!! (I think) 😂

    • @blanchonqc5716
      @blanchonqc5716 4 ปีที่แล้ว +1

      The blades were welded badly

  • @rosegoldleviathin3713
    @rosegoldleviathin3713 5 ปีที่แล้ว

    What fan is that?

    • @seth6525
      @seth6525 4 ปีที่แล้ว

      @MinerMini2115 actually, its not a hampton bay grayton. The fan looks similar but its not a grayton. this fan and a grayton are different from each other

  • @CajunBeauty1
    @CajunBeauty1 7 ปีที่แล้ว +1

    you know you can get new brackets for this fan that blade is bent almost to the ceiling yep it need new brackets

  • @tylerwhoisafanoffanstrains9246
    @tylerwhoisafanoffanstrains9246 5 ปีที่แล้ว

    Why is there three chains instead of two?

  • @TramTrafficLightMan
    @TramTrafficLightMan 2 ปีที่แล้ว

    Why does the thumbnail look like a illusion?

    • @hobbycentral3516
      @hobbycentral3516  2 ปีที่แล้ว

      The fan was spinning on high when I took the picture. That shed didnt have the best lighting back then so maybe the camera shutter stayed open a little longer than normal to compensate

  • @Varkyorsomethingstupid9963
    @Varkyorsomethingstupid9963 4 ปีที่แล้ว

    0:59 encon:oh my gosh
    Unknown spinner: reeeeeeeeeeeeeeeeeeeeeeeeee
    0:40 Hampton Bay reeeeeeeeeeeeeeeeeeeeeeeeeeee

  • @acek3725
    @acek3725 หลายเดือนก่อน

    Why is that ceiling fan wobbling so much?

    • @hobbycentral3516
      @hobbycentral3516  หลายเดือนก่อน

      cuz the blades are all over the place😂

  • @Elijahbdareal1926
    @Elijahbdareal1926 7 หลายเดือนก่อน

    Fan name

  • @coltconnorproductions1016
    @coltconnorproductions1016 8 ปีที่แล้ว

    why is there a third pull chain?

    • @joshd8624
      @joshd8624 8 ปีที่แล้ว

      Connor Nelson

    • @mrtraindeveloper475
      @mrtraindeveloper475 8 ปีที่แล้ว

      Connor Nelson it's because there's a switch that the fan turns left and it turns right

    • @coltconnorproductions1016
      @coltconnorproductions1016 8 ปีที่แล้ว

      LittleTyReseG Roblox minecraft roplays and more thanks

    • @luzcolon5477
      @luzcolon5477 7 ปีที่แล้ว +1

      the third chain is so stupid

    • @joshd8624
      @joshd8624 7 ปีที่แล้ว

      Luz Colon oh please.

  • @Rylan3456-z7y
    @Rylan3456-z7y 5 ปีที่แล้ว +10

    Woah this is an interesting fan the housing spins with the blades!

  • @TOPGamesYT-
    @TOPGamesYT- 4 ปีที่แล้ว +1

    Do you have the worst ceiling fan ever

  • @amyradford18
    @amyradford18 4 ปีที่แล้ว +1

    Has The Correct Order Of Blades But Why The Hole The Wobbly

  • @ThatTexanCollector
    @ThatTexanCollector 8 ปีที่แล้ว

    Fan?

  • @garyjones8752
    @garyjones8752 4 ปีที่แล้ว +2

    That’s a Hampton bay graton

  • @mtgau2000
    @mtgau2000 4 ปีที่แล้ว +2

    DA DA DA DA
    Oh don't mind my fan!

  • @imaxdjdbdbdbdb4954
    @imaxdjdbdbdbdb4954 4 ปีที่แล้ว +1

    That fan is so similar than mine

  • @PorterTheFanCollector
    @PorterTheFanCollector ปีที่แล้ว +3

    The reason for all shaking to the other 2 fans is that it is a flush mount install. If it had a very short down rod instead, the shaking would not be as effective on the rest of the room.

  • @princeautism2694
    @princeautism2694 4 ปีที่แล้ว

    Hampton Bay Grayton?

  • @AxfireYT
    @AxfireYT 3 ปีที่แล้ว +2

    0:44
    It got to the point of vibration

  • @dareal_deeblock
    @dareal_deeblock 7 ปีที่แล้ว

    At 0:59 It's a Canarm Galaxy Ceiling Fan.

    • @dareal_deeblock
      @dareal_deeblock 5 ปีที่แล้ว

      @Sheila Waldon no Hampton Bay Grayton ceiling fans do not have pretzel brackets.

    • @dareal_deeblock
      @dareal_deeblock 5 ปีที่แล้ว

      @Sheila Waldon Also Hampton Bay Grayton are 42 not 52 and it's a Canarm Galaxy Ceiling Fan

  • @jaimenbrunson1652
    @jaimenbrunson1652 4 ปีที่แล้ว

    I don’t see any wobbling or hear any noise

  • @GuitarRocks360
    @GuitarRocks360 9 ปีที่แล้ว +2

    0:54. Don't mind my fan

  • @fansambulancesrobloxandmor6894
    @fansambulancesrobloxandmor6894 7 ปีที่แล้ว +1

    This fan wobble

  • @rickroll1182
    @rickroll1182 3 ปีที่แล้ว

    1:08 just make me happy

  • @firestonevlogs6361
    @firestonevlogs6361 6 ปีที่แล้ว

    3 pull chains?

    • @seth6525
      @seth6525 5 ปีที่แล้ว

      the third one is for reverse

    • @seth6525
      @seth6525 5 ปีที่แล้ว

      @MinerMini2115 cool!

    • @seth6525
      @seth6525 5 ปีที่แล้ว

      @MinerMini2115 yeah!

    • @brentfisher902
      @brentfisher902 3 ปีที่แล้ว +1

      @@seth6525 It would be funny if the reverse was wired up like a blinker bulb on C7 Christmas lights and kept the fan changing its direction of rotation over and over until the fan fell down.

    • @seth6525
      @seth6525 3 ปีที่แล้ว

      @@brentfisher902 bruh XD

  • @LesVentilateursduQuebec
    @LesVentilateursduQuebec 10 ปีที่แล้ว +2

    Pauvre Nadair. Tu pourrais lui trouver de nouveaux bras de pales. Intéressant le montage avec les différents plans. Peu de gens font ça.

    • @hobbycentral3516
      @hobbycentral3516  10 ปีที่แล้ว

      Thanks! Yeah Im making a paypal account so I can buy some blade brackets off the internet because I have searched everywhere around here and found nothing but the odd lightkit lol

    • @katthefanenthusiast5793
      @katthefanenthusiast5793 10 ปีที่แล้ว +1

      Please- English. I've said this enough times. That comment, by the way, does not have a "translate" button.

  • @TheFanUniverse
    @TheFanUniverse 6 ปีที่แล้ว +3

    But you said it doesn't wobble LOL