Wow, what a before and after - as expected. Give yourselves a raise. The bucket is yellow. Travis looks like a good kid, you are so kind in helping him develop a good work ethic. He'll go far in this life.
I’ve been binge-watching a lot of these videos, & it’s just amazing the difference between the before & after shots! Definitely a work of art, on all these projects of yours! 👍
Amazing. The work you do far surpasses that done by paver installers in central florida. Such attention to detail. No corner cutting or “good enough” attitude.
Man the difference between the before and after shots is night and day.... looks awesome!!!!! Always impressed with the detail.... I think Benny and you could be TWINS... you know like Arnold Schwarzenegger and Danny Devito.....
Interesting info on laying pavers on a slope. I have an area that I am looking to put a paver walkway on and I can't decide if I need to build a wall to flatten out the grade or build it up with open grade base and take a chance. If I build a wall it's going to be one block high which I think will look a bit silly. I guess I could take a chance building it up with open grade base and if it doesn't work out build the wall later.
Yea, you can lay pavers at pretty severe slopes. Just not recommended by most people. I would say do exactly what you said, build the walkway and if it seems to far up, then build a wall to meet it 👌🏻
Haven't tried them, but Harbor Freight has a better line of dead blow hammers now in addition to the orange music shakers that youre probably referencing here.
I haven't had any issues with drainage with the woven fabric. The non woven may be more permeable, but the woven still is permeable. I prefer the woven because it is stringer and stabilizes the stone better ✌
I’m looking to do something similar. What would a job like this cost rough estimate. I know I’m my area may be a little different but wanted to see what to save for and don’t want to be taken advantage of either.
An entire project like this can cost between $16,000 - $20,000 depending on different variables. For typical paver installs, it costs $25.00 per sq ft to install on average
Hey thanks for all your advice not something I do daily but turn out awesome! went with Oaks Ridgefield smooth lg combo marble gray and Oaks 4 x 8 onyx soldier course border total of 500 sq.. No 3/4 washed or chip stone in my area I set them on 6" compacted crush limestone 10" under spa with slag bed. One question if I could, how hard would it be to do a repair (if needed @ spa area) I used the Alliance poly joint sand? I will continue to follow I like Mr. Personality (Benny) and your awesome too! Thanks again, peace.
Nice, glad it worked out well for you! 500 sq ft is a nice size area, you must be pumped. Repairing poly sand is not super difficult, just time consuming…. Definitely possible though. Most of the time a pressure washer can get all the old sand out and leave you ready for new sand. Thanks for the support! ✌🏻
@@TheChristianHardscaper Yes very excited that it's completed just fine tuning the beds and grass for the big weekend! Have a safe holiday weekend, thanks brother and God Bless.
We use concrete on the edges of the pavers, just didn't show it in this video. Here is a link to a video I made on how we concrete the edges 👉th-cam.com/video/_X1tCmMJQqk/w-d-xo.html
I charge between $50-$75 per man he depending on the work we are doing. Simple projects get lower labor rates and more complex jobs get higher labor rates.
Wow, what a before and after - as expected. Give yourselves a raise. The bucket is yellow. Travis looks like a good kid, you are so kind in helping him develop a good work ethic. He'll go far in this life.
Thank you for the comments! Travis is awesome kid, very motivated and interested in many things. Can't wait to watch him grow ✌
Super video, could you do a "How To Quote A Hardscape Job " video plz
Thanks, I get that request pretty often actually. I hope to make a video or 2 like that at some point this season.... ✌
I’ve been binge-watching a lot of these videos, & it’s just amazing the difference between the before & after shots! Definitely a work of art, on all these projects of yours! 👍
Thank you very much for the feedback! I love this work and seeing the end result of what you put your hands to. ✌
Amazing. The work you do far surpasses that done by paver installers in central florida. Such attention to detail. No corner cutting or “good enough” attitude.
Thank you, I try to stay focused on quality over everything else. That is what separates you from the rest... ✌
Wow this is a work of art. You guys did great.
Thank you ✌
Man the difference between the before and after shots is night and day.... looks awesome!!!!! Always impressed with the detail.... I think Benny and you could be TWINS... you know like Arnold Schwarzenegger and Danny Devito.....
It really was a heck of a transformation… And I love the reference! 🤣🤣 we are exactly the same kind of twins they were in that movie! 😂✌🏻
Trying to save your videos for the winter brother. Great job brother.👍🏻🇺🇸🇺🇸🇺🇸🇺🇸
Not a bad idea, there will be plenty to watch then. Thanks brother! ✌
beautiful job! I love the staggered/random pattern!
Thank you, I am a big fan of those pavers ✌🏻
You should get the owners to cover under the house. It’s unsightly. Put some gem stones on it to look like it’s a rock design. Nice job 🎉
Awesome job! 🤙💯
Job looks awesome brother. couldn’t wait for the fall. Start watching the video.👍🏻🇺🇸🇺🇸🇺🇸🇺🇸
Nice! 🤣✌
I love the work you and your son do.
🤣 Thank you very much! ✌
You’re a Gem! Great work and a great Man!
Thank you, I appreciate the kind words ✌
Lookin good....except bucket that was really yellow !!!
LOL debatable... 🤣 ✌
That looks fantastic. The contrast from before and after is amazing!
Thanks, big difference! I had a blast with that install ✌🏻
lets go, sorry im late
No worries, thanks for watching! I’m dying for a long form from you brother, I hope all is well! ✌🏻
You shouldn't be sorry having work and success ;)
Thank you ✌
Amazing work as always
Thank you very much! ✌
Great job
Thanks✌🏻
You guys do fantastic work! Gives me DIY goals.
Thank you! That is a goal I have with my channel, show others that they can do this work also. And it is a very rewarding thing ✌
Awesome job 👍🏻
Thanks ✌🏻
Great work, man. Appreciate the before and after shots during the final walkthrough.
Thank you, I thought it was a cool touch. I appreciate the feedback ✌🏻
Interesting info on laying pavers on a slope. I have an area that I am looking to put a paver walkway on and I can't decide if I need to build a wall to flatten out the grade or build it up with open grade base and take a chance. If I build a wall it's going to be one block high which I think will look a bit silly. I guess I could take a chance building it up with open grade base and if it doesn't work out build the wall later.
Yea, you can lay pavers at pretty severe slopes. Just not recommended by most people. I would say do exactly what you said, build the walkway and if it seems to far up, then build a wall to meet it 👌🏻
Haven't tried them, but Harbor Freight has a better line of dead blow hammers now in addition to the orange music shakers that youre probably referencing here.
😂 nice! Music shakers… that’s freaking hilarious! 🤣
I will have to check out the newer ones they got ✌🏻
@@TheChristianHardscaper why dont they have replaceable polyurethane faces on dead blow hammers like thin versions of rubber mallets?
👍
I noticed it looks like you use a woven fabric, wouldn't a non-woven fabric be better since it's much more permeable?
I haven't had any issues with drainage with the woven fabric. The non woven may be more permeable, but the woven still is permeable. I prefer the woven because it is stringer and stabilizes the stone better ✌
I’m looking to do something similar. What would a job like this cost rough estimate. I know I’m my area may be a little different but wanted to see what to save for and don’t want to be taken advantage of either.
An entire project like this can cost between $16,000 - $20,000 depending on different variables.
For typical paver installs, it costs $25.00 per sq ft to install on average
@@TheChristianHardscaper thank you! I wish you were in my area. Love the work and attention to detail
Looks great bud . Did you do the concrete border to lock the walkway in ?
Thanks man, we did use concrete along both edges ✌🏻
Hey thanks for all your advice not something I do daily but turn out awesome! went with Oaks Ridgefield smooth lg combo marble gray and Oaks 4 x 8 onyx soldier course border total of 500 sq.. No 3/4 washed or chip stone in my area I set them on 6" compacted crush limestone 10" under spa with slag bed. One question if I could, how hard would it be to do a repair (if needed @ spa area) I used the Alliance poly joint sand? I will continue to follow I like Mr. Personality (Benny) and your awesome too! Thanks again, peace.
Nice, glad it worked out well for you! 500 sq ft is a nice size area, you must be pumped. Repairing poly sand is not super difficult, just time consuming…. Definitely possible though. Most of the time a pressure washer can get all the old sand out and leave you ready for new sand.
Thanks for the support! ✌🏻
@@TheChristianHardscaper Yes very excited that it's completed just fine tuning the beds and grass for the big weekend! Have a safe holiday weekend, thanks brother and God Bless.
✌
Hola amigo dónde puedo comprar ese tipo de piedras si me puedes mandar el nombre de las piedras y el color y tipo de piedras
The pavers are made by (Genest) they are called (Grand Katahdin) with a color tone called (Granite)
👋🏻hello
✌🏻
Well done. Do you have a video or web page on the cameras you film with?
Thank you, I use 2 GoPro 8’s. I hope to buy a couple newer versions this season at some point ✌🏻
Whatd that pallet of pavers cost ya just curious from fl
About $650
What keeps the edges from falling out
We use concrete on the edges of the pavers, just didn't show it in this video. Here is a link to a video I made on how we concrete the edges 👉th-cam.com/video/_X1tCmMJQqk/w-d-xo.html
Hi Kyle, Benny - how can someone get in touch with your company to a project ?
Thanks,
Ariel m
I am an experienced builder. Is it possible to work with you? I admire you
how much money do you try to make per day for labor?
I charge between $50-$75 per man he depending on the work we are doing. Simple projects get lower labor rates and more complex jobs get higher labor rates.
👍