I first discovered your channel when you posted a video in a ps2 Facebook group. Keep up the good work man you have a beautiful collection of consoles and your content is underrated.
@@fabiofontes thank you! I am currently in the middle of refurbishing my own console thanks to your help! Do you also use the alcohol on the q tip that you used to clean the disc drive and laser?
muito boa a restauração, o console ficou impecável. o que me impressiona é o fato de mesmo exposto a tanta fumaça de tabaco, poeira e umidade, a proteção de metal não aparenta ter pontos de corrosão.
There are many ways of applying thermal paste.. I found this way one of the most effective after removing the cooler i can see a good coverage without any excess.. But there's other ways of corse!
My X360 RGH after I cleaned the inside and reassembled it, my controller can't sync even when I tried using a cable, the result still doesn't work, I wonder why I'm so confused? I've used 2 controllers and the results are the same 😌
@@dtrianplay8729 I think there is a small pcb module that connects almost like an USB ... check it if its proper connected! I think its for both bluetooth and wifi.
Why do these videos tell people to break the plates loose? thats what the holes in the plates are for to stick a dental pick or small screw driver into release the snaps. The holes are right over the snaps just pop them and release the whole plate no need to break anything off.
This is not a tutorial… im not teaching nothing… :) However Microsoft comparing with all of consoles are a pain in the ass to dissassembly i have a done a couple and even with carefull sometimes the tabes broke depends hows the condition of them!
@@fabiofontes tutorial or not. You present it as how to disassemble your Xbox with no disclaimers. You are showing people incorrectly how to do it and telling them to break their console plates. People are going to do this weather you call it a tutorial.or not. You 100% do not have to break the plates it is not a pIn to remove them at all you just stick something down in the holes that are there for the exact purpose to release the clips for the whole end piece. No breaking anything off required. If you don't know how to do something then why out up a video claiming you do?
@@frankb.7354 This is a video of me cleaning my console..Just that.. The the title is that . The title is not HOW TO... and problems happen , stuff broke .. why hide? If you are a perfect person that know how to do everything please show us your skills and videos... Im shure all ppl will be glad so see even me!! :)
@@fabiofontes Look my dude Im sorry you took it personal. I was merely commenting on breaking the panels is the incorrect way to disassemble one of these so your viewers had the correct info and didn't also break theirs. You turned it into a personal thing. Look if you cant accept criticism and the fact you are doing something wrong and accepting feedback on the correct way then maybe you shouldn't be posting videos? I shutter to think how many people have now broken their Xbox following your lead. call it a tutorial or not people are gonna watch this to disassemble their Xbox and follow what you show. which is incorrect. its not just you I have made this comment on 3 other videos two of which were tutorials on disassembly. There is zero need to break and points off or separate the plate from the outer ring. you simply put something down the holes which are their for that exact reason to release the snaps and remove the entire end piece at once. you know if i put a video out that someone pointed out to me was incorrect and maybe causing damage to others I would be grateful and say thanks and correct my video instead of being hostile and defensive because i was wrong. but that's how people are cant admit they are wrong instead get pissy with the person telling them they are wrong.
Not at all! The thing here that you insist that im telling ppl to break their consoles and im not thats the only point im mad… the rest is ok… Im not perfect and sometimes things i just undertstand how they are after… Anyway im ok with criticism because my channell as a lot of custom stuff and ppl sometimes dont like and i absolutly respect that as i respect your comment here too… if you are more expert than me im ok with that..
I should probably open mine up and give it a clean! Not used it in years, and now i have a guide of how to do it thanks to you.
Thnks for watching!!! 💪
i bought a used one in the past few months. i finally got around to opening it up and it looks like it's been cleaned already. lucky me.
I first discovered your channel when you posted a video in a ps2 Facebook group. Keep up the good work man you have a beautiful collection of consoles and your content is underrated.
Hey man!!! Thanks for your kind words!! It means a lot. !
É sempre bom e relaxante ver um vídeo teu… mais uma (para mim) grande máquina recuperada para mais uns anos… parabéns!!
Obrigado!!! 💪💪💪💪
Fabinho, mais um trabalho impecável! quanto capricho!
Obrigado!! :) 💪💪
POV: I want Xbox 360 Slim In October! :D
😂😂 go for it man!
Parabéns meu amigo mais um console na colação 🤜🤛🎮
Obrigado 💪💪
@@fabiofontes tamos juntos ✌️
That is nuts!
😂😂😂
Muito satisfatório ver uma limpeza dessas, ótimo console
Obrigado! Sim é uma bela maquina!!!
What is the cleaning spray you are using on the cpu and circuit board?? I need that for this project big time
Its isopropyl alcool! :)?
@@fabiofontes thank you! I am currently in the middle of refurbishing my own console thanks to your help! Do you also use the alcohol on the q tip that you used to clean the disc drive and laser?
@@conners1966 yes on the Lens too! :) thnks man!! :)✌️
muito boa a restauração, o console ficou impecável. o que me impressiona é o fato de mesmo exposto a tanta fumaça de tabaco, poeira e umidade, a proteção de metal não aparenta ter pontos de corrosão.
Obrigado! Sim verdade! Tive uma muito menos suja e cheia de ferrugem :)
i Still have mine, in fact i have two, an arcade edition and a slim version, one of the best consoles ever, and with RGH even better xD
Yeah! I have a couple of thoose .. and i need to try an RGH too !
Should I apply thermal paste this way?
There are many ways of applying thermal paste.. I found this way one of the most effective after removing the cooler i can see a good coverage without any excess.. But there's other ways of corse!
My X360 RGH after I cleaned the inside and reassembled it, my controller can't sync even when I tried using a cable, the result still doesn't work, I wonder why I'm so confused? I've used 2 controllers and the results are the same 😌
@@dtrianplay8729 have a look on the antenas on the inside… i think there is some bluetooth and wireless cables… check if you connect them…
@@fabiofontes Where is it?
@@fabiofontes my xbox360 slim ver Is the RF board you mean?
@@dtrianplay8729 I think there is a small pcb module that connects almost like an USB ... check it if its proper connected! I think its for both bluetooth and wifi.
مبدع تحياتي الك🌹🌹
Thanks!!!
Amazing man very god great job kkk
Thanks!!! :)
Ficou impecável.
Sim, ficou mt bem! Obrigado!
Xbox 360
O melhor para jogar
Tá difícil comprar um você gosta do
Xbox 360 BRASIL
Полезный видос📹
Thnks ! :)
@@fabiofontes 🤝🏻😁👍
What’s in the little spray bottle??
Contact cleaner! :)
마소는 어떻게 뜯으라고 접합부를 저렇게 만들었는지 모르겠는데 ㅎㅎ;; 그나저나 기기에 담배냄새 배는건 동서를 막론하고 똑같나보네요 😂
😂😂😂😂
Good joob
Thnk you!
Great video thank you
Thank you!!!
amazing
Thanks !!!!
You dont need to brake those top/bottom covers.
Yeah… I know! Everytime i open one of this messed up and and remember that after 😬… But its all good!
Mine is not turning on
:(
Xbox 360
Os impostos no Brasil Xbox 360
Tá muito difícil de novo eu vou ficar com o Xbox 360 jogos
é uma otima consola!!
Imagino o odor. Como tem gente porca, que não tem cuidado com suas coisas... Terrível. Sorte desse console ir parar na sua mão!!! 🙏🏻😇
Ahhaaha cheirava mesmo mal esta!!! :)
Why do these videos tell people to break the plates loose? thats what the holes in the plates are for to stick a dental pick or small screw driver into release the snaps. The holes are right over the snaps just pop them and release the whole plate no need to break anything off.
This is not a tutorial… im not teaching nothing… :) However Microsoft comparing with all of consoles are a pain in the ass to dissassembly i have a done a couple and even with carefull sometimes the tabes broke depends hows the condition of them!
@@fabiofontes tutorial or not. You present it as how to disassemble your Xbox with no disclaimers. You are showing people incorrectly how to do it and telling them to break their console plates. People are going to do this weather you call it a tutorial.or not. You 100% do not have to break the plates it is not a pIn to remove them at all you just stick something down in the holes that are there for the exact purpose to release the clips for the whole end piece. No breaking anything off required. If you don't know how to do something then why out up a video claiming you do?
@@frankb.7354 This is a video of me cleaning my console..Just that.. The the title is that . The title is not HOW TO... and problems happen , stuff broke .. why hide? If you are a perfect person that know how to do everything please show us your skills and videos... Im shure all ppl will be glad so see even me!! :)
@@fabiofontes Look my dude Im sorry you took it personal. I was merely commenting on breaking the panels is the incorrect way to disassemble one of these so your viewers had the correct info and didn't also break theirs. You turned it into a personal thing. Look if you cant accept criticism and the fact you are doing something wrong and accepting feedback on the correct way then maybe you shouldn't be posting videos? I shutter to think how many people have now broken their Xbox following your lead. call it a tutorial or not people are gonna watch this to disassemble their Xbox and follow what you show. which is incorrect. its not just you I have made this comment on 3 other videos two of which were tutorials on disassembly. There is zero need to break and points off or separate the plate from the outer ring. you simply put something down the holes which are their for that exact reason to release the snaps and remove the entire end piece at once. you know if i put a video out that someone pointed out to me was incorrect and maybe causing damage to others I would be grateful and say thanks and correct my video instead of being hostile and defensive because i was wrong. but that's how people are cant admit they are wrong instead get pissy with the person telling them they are wrong.
Not at all! The thing here that you insist that im telling ppl to break their consoles and im not thats the only point im mad… the rest is ok… Im not perfect and sometimes things i just undertstand how they are after… Anyway im ok with criticism because my channell as a lot of custom stuff and ppl sometimes dont like and i absolutly respect that as i respect your comment here too… if you are more expert than me im ok with that..
من وين
Im from Portugal!
give me please..
🤣🤣
@@fabiofontes 🤫
@@fabiofontes niye gülüyorsun?
Ganz ehrlich für 15€ würde ich mir sie auch holen
Absolutly!!!! :)