Hey Whisperer, great video, I have two questions, Club Car DS 48v. won't run, no solenoid click, I have full voltage on all the wires in your video except the light. blue in OBC harness and the blue/white (ground wire to controller) on the solenoid has only 19v. Also I attached a Curtis 1313 programmer to the controller at the 4 plug, the programmer will not connect and give me any readings at the controller.
@@mike-gr7bt okay unplug the computer harness and jump the blue and white wire with a paperclip or wire and let me know what it does. Meaning key on in forward and hit the gas
@@Golfcartwhisperer the 1313 programmer does nothing, the red slash in the top corner of the monitor is illuminated indicating "no connection", the screen has two messages printed across the monitor one says "if the programmer is connected to one device to wait for connection". the other message "if programmer is NOT connected to a device wait for connection. I can give exact wording in an hour. I will be at the golf cart in the morning to run your suggested test. Thanks
The 1313 programmer is plugged into the controller, the message on the face of the programmer is " If a 1313 cable is connected to a device, Please wait for a connection." Below that message is another " If a 1313 cable is NOT connected to a device, Press the appropriate soft key for offline mode." soft key options are Serial and CANOpen. The blue/white wire on the solenoid small terminal is 19v. (the one that goes to the controller) , the dark blue wire on the small terminal of the solenoid (positive for key switch) has battery pack voltage 50.1V. Thanks Whisperer for your help.
Also did you take out anything during the conversion meaning charger receptacle or computer. Does your cart have an on board computer Or not Some do some don’t
@@Golfcartwhisperer yes somebody took something out cut some wires and now it won’t go In reverse or forward it does not click when you turn on the key
Hey golf cart whisperer I have a ezgo txt 36v with a navitas controller sometimes the cart stops moving and I have unplug the controller wait a little plug back in and it runs but happens pretty frequently do you think the controller is bad or could there be a different problem?
Thanks for watching and commenting. When it quits running look at the controller and tell me if it flashing a. 2-3 code if it is it means the capacitors inside the controller are losing voltage. Don’t know how long you had the cart for. But if you call Navitas they will send you another one. But look at controller when quits running and let me know what it blinks. But if I had to bet money replace controller.
Thank you for helping out there, especially glad that you enjoy what you do.. Subscriber Now!
@@carvinlambert6899 thanks for the support. Appreciate you subscribing. Hit that like button for me.
Wow. Who would have thunk.
@@abnerschmucker1 what’s up man. Call if needed been busy
Hey Whisperer, great video, I have two questions, Club Car DS 48v. won't run, no solenoid click, I have full voltage on all the wires in your video except the light. blue in OBC harness and the blue/white (ground wire to controller) on the solenoid has only 19v. Also I attached a Curtis 1313 programmer to the controller at the 4 plug, the programmer will not connect and give me any readings at the controller.
@@mike-gr7bt okay unplug the computer harness and jump the blue and white wire with a paperclip or wire and let me know what it does. Meaning key on in forward and hit the gas
@@mike-gr7bt if the computers bad you won’t have no power to the Curtis handheld. Let me know what it does
@@Golfcartwhisperer the 1313 programmer does nothing, the red slash in the top corner of the monitor is illuminated indicating "no connection", the screen has two messages printed across the monitor one says "if the programmer is connected to one device to wait for connection". the other message "if programmer is NOT connected to a device wait for connection. I can give exact wording in an hour. I will be at the golf cart in the morning to run your suggested test. Thanks
@@mike-gr7bt I just read you have 19v on solenoid. On what post on solenoid do you have 19v?
The 1313 programmer is plugged into the controller, the message on the face of the programmer is " If a 1313 cable is connected to a device, Please wait for a connection." Below that message is another " If a 1313 cable is NOT connected to a device, Press the appropriate soft key for offline mode." soft key options are Serial and CANOpen.
The blue/white wire on the solenoid small terminal is 19v. (the one that goes to the controller) , the dark blue wire on the small terminal of the solenoid (positive for key switch) has battery pack voltage 50.1V. Thanks Whisperer for your help.
Do all club carts presidents have solenoids on them mines wont go in forward or reverse
@@ReddJedi378 yes every golf cart has a solenoid. What’s your cart doing a slow what year.
@@Golfcartwhisperer 2015 presidential campaign club cart lithium conversion
Did it run prior
Also did you take out anything during the conversion meaning charger receptacle or computer. Does your cart have an on board computer Or not Some do some don’t
@@Golfcartwhisperer yes somebody took something out cut some wires and now it won’t go In reverse or forward it does not click when you turn on the key
Hey golf cart whisperer I have a ezgo txt 36v with a navitas controller sometimes the cart stops moving and I have unplug the controller wait a little plug back in and it runs but happens pretty frequently do you think the controller is bad or could there be a different problem?
Thanks for watching and commenting. When it quits running look at the controller and tell me if it flashing a. 2-3 code if it is it means the capacitors inside the controller are losing voltage. Don’t know how long you had the cart for. But if you call Navitas they will send you another one. But look at controller when quits running and let me know what it blinks. But if I had to bet money replace controller.
@@Golfcartwhisperer OK sounds good. I will test it out and get back to you.
@SandraPerez-vu1wc np. Just let me know
I finally made it 👍✌️
@@bbrcummins1984 glad you made it. Where you been, under a rock?