I started making 3/4oz “twitching” jigs for salmon. The problem I’ve been having is too much powder on the jig when I dip them in the jar. This should really help with the coating bubbling like that!
2 years later... anything you wish you would have done different? I looked for a follow up video but didn't see one. Plus great video! Very well explained!
Just a heads-up, the Gorilla glue is water reactive. You can read it on the label. A slight smearing of water on the surface of your parts. will catalyse the glue and cause it to set quicker.
I have a 5 to 30 gallon fish tank air pump. Just curious as what you use. I’m new to powder coating and just trying to get a feel for the appropriate materials
Finally got everything set up using 4 inch pvc with TJ Tackle filters. I Filled it halfway. I readjusted the air. But, I can't get it to rise nowhere near the top without the volcanos spilling out it first. What am I missing?
Filter media may be upside down, also you definitely need to seal the media to the bottom of the cup all the way around, if you don't you will get volcanos in specific spots
@@B8N_Tackle So it's shiny side up. Right? And I used epoxy resin to seal it. I made 4. I'm gonna try another one tonight when I get home from from work.
@ThoughtManifest FYI, did you mean 3 inch, I'm not aware of a 4 inch. But yes I did Shiny side up and they worked great for me. But also keep in mind not every color powder paint is created equal, I still dip my blacks and white because they are a heavier powder and don't fluidize as well.
@@B8N_Tackle I was referring to 4 in long. For some reason, the air valve hole on yours looks higher up than mine. Also, I did test it on black high gloss powder.
Having trouble trying to find the top lid that will keep the powder intact when not in use. The Home Depot guy gave me the same thing used for the bottom of the base. It don't look or work like yours. What exactly are you using for the top lid? Where did you get it?
How far down do you push the cup into the base to seal it? Are you still using the lunch bag as your filter or did you find something else that works better, I’m having issues with solid colours volcanoing all the time.
Hey Mike! Thanks for the comment! I push the cup all the way down in as far as it will go, you may need to sand or trim the edge of the cup and paper to get it in there, but you do still want it snug. I don't use these with solid color paints only the thicker 2 colored paints. I have the Volcano effect as well but when I turn down the air that usually goes away. I have stuck with paper bags, but if you find a better material please let me know, I feel like it's just a touch too thick.
WITAM SUPER FILMIKI ROBISZ DOBRĄ PRACĘ POKAZUJĄC RÓŻNE TECHNIKI . MOJA PRZYGODA Z WYLEWANIEM GUM TO DOPIERO POCZĄTEK ,CHCIAŁBYM SIĘ DOWIEDZIEĆ GDZIE MOGĘ KUPIĆ TE SZCZYKAWKI ALUMINIOWE DO ODLEWU CZY POSIADASZ JAKIEŚ STRONY INTERNETOWE JESTEM Z POLSKI POZDRAWIAM KRZYSZTOF
Najpierw bardzo dziękuję za miłe słowa! Nie jestem pewien, czy którakolwiek z witryn, na które chodzę, aby wziąć polskie kredyty. Paypal byłby najlepszym wyborem. Dużo zamawiam od Epic Bait Molds i Angling AI.
I could see maybe using 2 or 3 at a time for different color combos but I agree that thing is insane! Cool as hell just to make it though! Much love to SDG he is the man!
Great video thanks for sharing!
I started making 3/4oz “twitching” jigs for salmon. The problem I’ve been having is too much powder on the jig when I dip them in the jar. This should really help with the coating bubbling like that!
@motionsickness4088 it definitely will help for sure!
Thanks for sharing how you build your fluid beds.
2 years later... anything you wish you would have done different? I looked for a follow up video but didn't see one. Plus great video! Very well explained!
just seen the 2.0 lol
Thanks for the support! I made a 2.0 video after that one about the filter material but other than that, I still use them, rock solid.
Just a heads-up, the Gorilla glue is water reactive. You can read it on the label. A slight smearing of water on the surface of your parts. will catalyse the glue and cause it to set quicker.
Good to know, thank you!
You can get the end caps that fit right into the coupling. Use pvc glue to connect it. Great video!
Thanks for the tip bro! Appreciate your support! 👊
Cool video, I had no idea what those were until I saw it. Seems like an awesome way to coat jig heads.
I had been told before that they weren't worth it but found recent that they work well with certain thicker powder paints.
Great work I am new here but I think you do great work i have a question what is the length of your cup thinks for sharing
I will let you know when I get in the shop, I want to say like 3 inches.
2 and 3/4 inches
I have a 5 to 30 gallon fish tank air pump. Just curious as what you use. I’m new to powder coating and just trying to get a feel for the appropriate materials
That should work fine bro! The amount of air will depend on how many cups you want to run at a time. I usually just run one or 2 at a time.
Finally got everything set up using 4 inch pvc with TJ Tackle filters.
I Filled it halfway.
I readjusted the air.
But, I can't get it to rise nowhere near the top without the volcanos spilling out it first.
What am I missing?
Filter media may be upside down, also you definitely need to seal the media to the bottom of the cup all the way around, if you don't you will get volcanos in specific spots
@@B8N_Tackle So it's shiny side up. Right? And I used epoxy resin to seal it. I made 4. I'm gonna try another one tonight when I get home from from work.
@ThoughtManifest FYI, did you mean 3 inch, I'm not aware of a 4 inch. But yes I did Shiny side up and they worked great for me. But also keep in mind not every color powder paint is created equal, I still dip my blacks and white because they are a heavier powder and don't fluidize as well.
@@B8N_Tackle I was referring to 4 in long. For some reason, the air valve hole on yours looks higher up than mine. Also, I did test it on black high gloss powder.
@ThoughtManifest yeah black does volcano, it's very heavy
Having trouble trying to find the top lid that will keep the powder intact when not in use.
The Home Depot guy gave me the same thing used for the bottom of the base. It don't look or work like yours.
What exactly are you using for the top lid? Where did you get it?
Test caps that match the same size pvc. www.lowes.com/pd/Charlotte-Pipe-2-in-x-2-in-dia-PVC-Schedule-40-Spigot-Test-Fitting/3357826
@@B8N_Tackle Thank you. I'm going there tomorrow. Also. I ordered filters from TJ can't wait for them to arrive. Thanks on that too
What are the base caps and what is the source?
The base cap is a 3" test cap from home depot or lowes.
Where do you get the caps?
Home depot or lowes in the plumbing section.
Where do I find the valve
I bought those at a pet store, fish tank air bubbler stuff.
How far down do you push the cup into the base to seal it? Are you still using the lunch bag as your filter or did you find something else that works better, I’m having issues with solid colours volcanoing all the time.
Hey Mike! Thanks for the comment! I push the cup all the way down in as far as it will go, you may need to sand or trim the edge of the cup and paper to get it in there, but you do still want it snug. I don't use these with solid color paints only the thicker 2 colored paints. I have the Volcano effect as well but when I turn down the air that usually goes away. I have stuck with paper bags, but if you find a better material please let me know, I feel like it's just a touch too thick.
I use printer paper
filter paper for brewing coffee, may work better
Gorilla glue is water activated. You are supposed to wet the area before gluing. No water defeats the purpose of using gorilla glue
WITAM SUPER FILMIKI ROBISZ DOBRĄ PRACĘ POKAZUJĄC RÓŻNE TECHNIKI . MOJA PRZYGODA Z WYLEWANIEM GUM TO DOPIERO POCZĄTEK ,CHCIAŁBYM SIĘ DOWIEDZIEĆ GDZIE MOGĘ KUPIĆ TE SZCZYKAWKI ALUMINIOWE DO ODLEWU CZY POSIADASZ JAKIEŚ STRONY INTERNETOWE JESTEM Z POLSKI POZDRAWIAM KRZYSZTOF
Najpierw bardzo dziękuję za miłe słowa! Nie jestem pewien, czy którakolwiek z witryn, na które chodzę, aby wziąć polskie kredyty. Paypal byłby najlepszym wyborem. Dużo zamawiam od Epic Bait Molds i Angling AI.
lay paper down ,if u spill just pick up paper and pour it back in
Thanks bud!
watch Adams Videos (SDG Custom ) his fluid bed videos he has a SWEET set up
Haha I watch all of Adam's videos.
I could see maybe using 2 or 3 at a time for different color combos but I agree that thing is insane! Cool as hell just to make it though! Much love to SDG he is the man!
@@B8N_Tackle I made a 4 cup version with a manifold like Adams and have a couple extra cups to easily swap colors 👍👊😎
@@djradrs199 awesome man! I need to sit down at some point and make more cups.
Доброго дня, я из России, и я не понимаю как через бумажный пакет для обедов проходит воздух ??? 😳😳😳 это волшебство какое-то, Вы Гари Потер 😂