Great video series. Bought a tech2 clone and this video helped me a lot to get the security access for my 2009 Saab 93 convertible. Struggled before seeing this. It is a great feeling to be able to set options that I want or even to be able to try different configurations. Thanks for posting.
Thanks for the video. I managed to get security access using VirtualBox with Windows XP and TIS2000. Tech2 was connected to PC through an Aten UC232A USB-serial adapter using USB passthough.
I enjoy your videos greatly. I want to ask if you are sure about the 2009-2012 models requiring GlobalTIS. Just today I programmed a key for a 2010 9-3 Sport (9440) and after making the request to add a key, Tech2 said to connect with TIS2000. I used GlobalTIS and received Security Access 1 but I still wonder if TIS2000 will work. Thank you.
Hello, Idk if you're still reading comments but I can't seem to purchase the correct cable to connect my tech 2 to my laptop(usb) as it doesn't have a db9.
"What was your experience'". Also the old 9-3 9-5 need a subscription for sps- access. 1998 to 2003 models. I had a Tech2 but it was the worst nightmare i had because this clones miss some electrical features the original have built in. I tried to change some setting on even both the models but for the auto-lock feature both models required sps-access. And the chinese clones and their (stolen) software can't provide it. So i ended on a Autel MaxiSys D907. And it works flawless. Extra subscription required.
Hi, not had chance to watch the whole video yet, so I apologise if you've explained this ~ I just have a quick question. Isn't there two types of security access? 1) You have to type the VIN number and gain security access for each individual car you wish to program. 2) Full security access that lets you program any car. I've already worked out this first option but can't find out how to get the unlimited security access. TIA
Is security access a one time thing for your vehicle? Or do you need to plug the device into a laptop for each separate "security-sensitive" function you want to do with a tech 2 on your vehicle?
If you're just using the tool with one vehicle it will remember that VIN for the next time. If you use different cars you have to request security access again!
It usually is recommended to plug power cable to the port on the communication cable for Tech2 and not directly to the Tech2 instrument (the VCI part of it) due to possible problems with VCI. Not sure why it is so, it was just recommended to me by multiple people working with Tech2 for years (the original equipment).
@@TechCars no no, if you check, the black cable that you plug the OBD adapter to it, has also a hole for electrical connector (in tech2 you get lighter cable, battery clamps cable or that house-plug cable). I was advised to use this hole to plug electric charge to tech2 so it's the closest way to resemble having charge from OBD, instead of plugging 12V directly to tech2 body. I was not fully explained why, but the advice sounded really serious, maybe at the old days when this equipment was used in official workshops, there existed some reason for it or advice from people repairing faulty tech2 or what.
@@PeterChomanic Hi, tech 2 was made with these options to power it, why don't you have a valid reason not to use the port on the body of the tech 2? Seems lame.
@@reginaldigweike4002 well, asi i said. Not sure why. But even people who repaired tech2 when had electrical issues told me that. Probably some route on the board is weaker or so?
Hej! Jag har fått meddelandet key not accepted helt plötsligt. Går inte längre öppna bilen med fjärrkontrollen heller. Jag har bara en nyckel kvar. Har ni något förslag på hur jag går vidare?. Kan twice ha dött helt plötsligt eller är det något annat troligare fel ni känner till? Jag har en Saab 2.0 t 9-5 från 2001. Tacksam för svar!!
Om nyckeln är OK (gissar att du tom testat byta batteri i den) så kan det vara så att det är TWICE som trilskas eller gett upp. Här kommer ett tips. Hoppas det går dig i rätt riktning. www.saabcentral.com/threads/tech2-and-the-twice-unit.650746/
Hi, is it possible to run globaltis for example 9-3ng -06 or is just working whit -08 and forwards. Just starting to learning tech2, love this channel. It’s great /Richard
Hi Richard. Thanks for the kind words. Yes you can use Globaltis for older Saab's as well. I just like to use the separate app TIS2000. The other one is a bit laggy in the web browser since it's using Java, but that's what you have to use if you have a 2009 and up. Good luck with your tech2 :)
Thank you very much for your great info. In my case, I have 1996 Saab 900 SE Turbo and I would like to add (program) two additional fobs. Currently only one is working well but my second fob is very weak. I need to almost the touch windshield of the car to open my doors. Do I need Tech 2 and such software for my car or can be program them differently? I have few old fobs taken previously from the junk yard from a different vehicles. Do I need new fobs to add the or can they be used from a different cars? Please let me know ween you are free of how to do it. Thank you very much for your time and help in this matter. S.F.
@@TechCars Thank you very much. I am in Canada and there is only very few Saabs on the road at this time. This is an excellent car and drives very well.
Is there a special tis2000 for SAAB? I downloaded tis2000 and there is no security key to even try and get security access? Where can I get it from? Ive tried downloading it couple times from different places no luck!
My 03/11 9-3 will not allow me security access on Global TIS, The (Chinese) Tech2 actually is asking that security access via TIS2000. I suspect I might need to subscribe to SPS TIS. To program a new key. Can anybody help on this. Many thanks.
Hello Sir, i have tried it gives me M259 please wait M3025 Connecting to security Access server ! than error E3324 Access to security access was denied. please help, what i'm doing wrong. thanks and regards.
What to do when it pulls the wrong Vin? Not the generic xxxxxxxxxx0000 we backed out of this, but ever since we get a conflict with VINs during security access for other tasks. Any ideas? Searched high and low already before I asked. Thanks, the cars a NAO 2008 9-3 2.0T on TIS 2000
@@TechCars I have only tried the Tech 2 on TIS as we have had it a week only, it looks as if the rrdm has the VIN that's in conflict and it cannot be removed in my vehicle with the tech 2. Is there anyone with info on how to remove the VIN, erase the eprom or any other Saab magic for me? 🤞 And it only refuses security access for certain functions.... We can still gain access to adjust the knock reduction.
Is it possible to make a guide for installing a new software version on the Tech2? I have i 148.000ENG and would like to have the SWE version. Havent found out how to...
Hi Andreas. There are two options here. If you can get your hands on an old laptop with a PCMCIA reader/writer you can copy the swedish .BIN onto it. The other way is going through the computer and some tech2 software. I think it takes ages to write a BIN file through the Tech2 onto the PCMCIA card. Do you have the swedish .BIN file?
@@TechCars yes i have the bin file. Smart dident think of the reader thing. Might have one in the junk pile at the office. Thanks for the tip. /En återfall Saab ägare i Malmö
@@TechCars yes. First time security access enabled sucesfully but i tried to add aux audio then the system detects an error after that i couldn't enable security access
i recently got my Tech2 but haven't really done much with it yet. ive been trying to do my own research on things but it all seems needlessly complicated. one big question i have tho, that i haven't found any concise answers to is do you need security access for an 01 saab 9-3? if not fantastic thats a big headache gone lol if yes then what are some things that are locked behind it?
Thanks for the very good quality video series. I am in doubt whether I have messed something up as I downloaded a FIN .bin 136.000 to the TECH2 before I even once tried to get the security access.. TECH Wiki says never to update the software thru TIS2000 or it will brick the device...? I bought an old laptop solely for this purpose and I run the TECH2 thru COM1 and the test says everything is fine. BUT. I have no security access (always implies an error that has occured) and it is telling me I have no access to handheld device as I try the TECH2 View.. Help?
@@TechCars I did upgrade the card to a 148,000 version but still I cant get the security access (Nor the view of the handheld device) for some reason..
@@t1mpetti Is it communicating OK? Could be the RS232 to USB adapter that is acting weird? The instrument work OK when connected to the car I guess? Reinstalling TIS2000?
Hi. Can you make a video explaining how to bleed the brakes on a 9-3 using the ABS bleed sequence int the Tech2? I have heard that it should be done if the brake pedal is soft and regular bleeding doesn't help.
Hello! Thank you for the video. Can the Tech2 have security access to multiple vehicles? Or is one Tech2 for one car? I'm trying to do a CIM swap from an '05 9-3 Linear to an '05 9-3 Aero. I am using a Tech2 clone from China, and I've been able to "remove" the CIM from the Aero using the Tech2 clone. However, I could not "remove" a CIM from two other Saabs I tried ('04 Linear and '05 Linear). Each time Tech2 says to use TIS 2000, I've used TIS 2000 or GlobalTIS, and the TIS programs told me security access type 1 was granted, but once connected to the cars ('04 and '05 Linear), Tech 2 said to use TIS 2000 again. I'm wondering if this is an issue with all Tech2 tools, or just the clones from China. Thank you in advance for your help!
Hi. The Tech2 can have security access to multiple vehicles. That's my experience. I've been using mine on several NG9-3's. It's usually a new vehicle everytime. I don't know how many VIN's it can store on the card. Maybe it's related to a write error, when the Tech2 tries to save the new VIN it can't.. And then it doesn't remember it when connected to the car again.. A bit strange yes. Do you have access to another PCMCIA card?
@@TechCars Hello! Thank you for the reply! No, I only have one PCMCIA card. I thought about writing a new BIN file to it, but then I might mess something up and lock myself out of security access to the Aero (or all Tech2 functinality, I don't know). I got some feedback from other Saab enthusiasts and they tell me that I can just physically disconnect the CIM from the junkyard car and then use the Tech2 to add it to my Aero. It appears that the remove function is for the benefit of other control modules in the car, not for the module (in this case, CIM) that is actually removed. Other modules must have updated bus lists - they must know that a part is missing so there is no conflict when the used module from another car is added. At this point this is only my hypothesis - do you know if this is actually the case?
@@grigoriy6516 I've never heard that you can use a CIM that isn't divorce, but maybe that's possible. It would be great, I guess you would need atleast one key that belongs to it.. Maybe someone else can pitch in here with that experience?
@@TechCars Hello Markus. I can confirm that a CIM does not need to be divorced from the donor car. However, the car receiving the CIM needs to have its own CIM divorced from it. My Aero now runs!
Hello I'm considering to buy a Tech2 but I'm not sure how easy it is to download TIS2000 on an XP computer? I recently rebuilt the head cylinder of my 93 but the car is not working. It returns the code P0638 (throttle body) and I apparently need a Tech2 to reset the throttle body ?
I use a virtual Windows XP machine. Do you have a computer running only Windows XP? Do you have the installationprogram for TIS2000? Tech2 is handy to have when doing those type of jobs yes :)
SaabCars thanks for your answer. I was actually planning to buy a cheap laptop with XP as my current is windows 10. Before buying the Tech 2, I want to be sure that I will be able to have the security code. I just rebuilt the head cylinder ou 93 but the car seems to be in limp mode with code P0648 (throttle body). I need tech 2 to diagnose and setup throttle body.
Is there another tool more modern that I can use for programing my key and steering module? I tried to use cloned tech2 and even bought a XP laptop and couldn’t make it work.
what about the Saab 900 NG 1994-1998? As far as I know they have the same ECU (T5-red cassette) as the 1997 and 1998 saabs. Do they need the same software and proceudure? has anyone tried learning a new key on these model years ?
Here's a great list of the different softwares that are available. www.tech2wiki.com/doku.php?id=wiki:which_.bin_files_are_available_for_tech2 The only SAAB model that need security access (that I'm aware of) is the NG9-3. The other ones don't. Best way to find out is if you browse through the menues in the Tech2. If you have 44.000 Card? BR Markus
@@TechCars Ok thanks alot. Ive downloaded all the saab softwares including tools to write them on a card. So i should be good. is it just finding the menue point "learn key" and then follow in structions ?
Great Video ... My doubt is next: seems like the Vin That shows on the TIS2000 is not the same Vin of the car, is this possible !? And why!? Second question: When The TechII tells me to plug it out and connected to the computer, there is a problem on comunicación, what can possible be !?
Hi. The VIN showing in TIS2000 can be a VIN from a previous request that was not done to 100%. Maybe that's the case? Also, the communication issues are very often related to the RS232 to USB converter as you can see in my episode #10 of Tech2 for dummies. Thanks for watching!
Hi, Im facing one problem. When Im connecting security access from tis2000, it doesn't show VIN window it only shows "Security access 3 enabled", not security access 1 or the vin part. What could help ?
Using tis2000, not global tis. After I get "security access 3 enabled" and trying to configure my car from diagnostic -> 2000 -> 9-3 -> all -> Engineering tool, it asks the security access code still
I haven't testet it. The software has to support the models. Can you get any confirmation on that before you buy it? From a Hardware point of view I think you're fine.
@@TechCars hej i have some trouble to find and buy a new pcmia card! I try to get security access and i trampade i klaveret så nu behöver jag ett nytt. Have a laptop HP with XP and i am denied security access no matter what i try. Swedish living in France left car 9-3 2008 to a garage to marry a trailer module to it! Then i got a clone to start to do and learn myself but now i have runned out of ideas! And when i got the car back parking lights rear blinked rear wiper did not work and it drains the battery in a night, and windows live their own life one window can be down in the morning when i arrive to the car. But most important is the card where to find one have tried Amazon and now after 3 months still not delivered Best Regards jan.peter.vanhainen@gmail.com
@@wanis76 I've been working day and night here. Sorry for not responding earlier. Did something happen with the trailer module connector? Ground issue? +12V issue? Is the trailer module completely disconnected? Have you checked the connectors and wires? BR Markus
@@triumphtwin1005 It might be the RS232->USB adapter that is not working correctly. I guess you are using one of those? Tech2 is very picky regarding that.
Hi. I have a modern computer. but I run a virtual Windows XP machine. I have seen that some people use the Tech2 software even on Windows 10 machines, but my virtual XP machine work so good so I decided just to keep it :)
@@TechCars I have a windows 10 PC and I run an Oracle VirtualBox Manager so that I may use the Saab WIS. Have you made a TH-cam tutorial video showing how I can load and run my TIS2000 software on this machine?
@@VinceBimbling Hi. No I have not done any video showing that :) I believe there were a few with TIS2000 installations last time I checked. Did you look them?
Hej Jag hat ett litet problem som jag försöker fixa men hittar ingen lösning på nätet så hoppas du kan hjälpa mig har tech2 med tis2000 men när jag försöker få säkerhets access så får jag ett meddelande att säkerhets acces nekades kod e3324 vad är det?
@@thisistheway1766 Kan rekommendera dig att kolla på denna listan.. Tech2an är extremt känslig och väljer man inte "rätt" omvandlare så blir den förvirrad.. www.tech2wiki.com/doku.php?id=wiki:tech2_usb2serial_test_report
@@TechCars för att när jag trycker på säkerhet acces så ändras det i tech2 skärmen...det står download mode rs232 conection.. och sen efter 5 sekunder så får jag upp varningen e3324 jag förstår inte hehehe 🤯
@@thisistheway1766 Det brukar bli så när omvandlaren börjar kommunicera, men kan inte slutföra kommunikationen. Tips är att prova med en som är godkänd.
Hello Pal, finally I was able to get the security access ... but how many types exist, coz seems like I got Security Access Type 1 ... can I do everything with this type of access !?
You get the level required for the things that you want to do with the car. If Level 2 or 3 is necessary you should be able to get this as well. I've never been refused security access up until 2010. There you need to have some kind of subscription.
Hi Bernado, please how did you get security access on tis2000? I'm having problems with mine, it communicates with my tech 2, but keeps coming up with errors and doesn't upload my vin from the car to my laptop.
@@reginaldigweike4002 hello there, sorry for this late reply... well Tis2000 takes ages to read the info, instead i used global tis and worked pretty well, after using the global tis some how tis2000 read the data.(in fact using global is more friendly than tis2000, try it on ...
Reginald Igweike hi, the one I have does not. What sort of errors do you have !? What exactly do you do when you connect the TechII to your car!? And after!? Cables are ok !?
I had the same problem when I installed the software from CD, however I found a version online that worked ~ I can't remember the link but do some digging on a few Saab forums and something should show up.
@@JMCortinax Ok Solved it! I´ve installed Global TIS (for my 2001 9-3 CV) and was able to get security Access! www.saabcentral.com/forums/showthread.php?t=675018 Heres how to do it, if you can´t find the link for the Global TIS download I am more than happy to help you guys
Thanks for free education. We need people like you in the world to help each other. That creates love . God blesses those who creates love in humanity. We are all children of one God. Am I right my fellows..? God bless you, Sir for devoting your time. My question is regarding 2003 Saab 95 Arc V6 turbo. Cyl 1 shows knocking in thousands. I changes timing belt 8 years ago at 64000 miles. Did not have Tech2 than. Recently got one and found this problem. I have done about 50,000 miles since than. May be I messed up the proper location of dots on the cam pullies etc....(a little bit). Please advise other possible reason and fix. It is only Cyl.1. Thanks to all helpers, May God bless us all.
Hi, hope someone can answer this - I have a 08 9-3 1,9 with a ECU thats damaged/dead and the car obviously wont start. I got a used ECU that matches the broken one with the intention of cloning the damaged one, but my question is, will a tech2 + candi + tis2000 let me marry the used ECU to my saab (as a new ECU without the data from the dead one?
Normal process is to switch out the T8 unit and add it to the car in the TEch2. For this you need to have security access. For 03-07 you get this with TIS2000. See this: th-cam.com/video/p4JbHSR6FMg/w-d-xo.html ---- I assume from this video that for 2008 to 2010 you can use GlobalTIS without a license/subscription to add a new ECU. For 2011-2012 he commented you need a license/subscription from GM.
Nice video, please can you direct me if I'm missing something, i have had my tech 2 over a year, saab 93 2005 and tis2000 on my xp laptop, still struggling to get security access to add and remove modules. People say i need java 6 to be installed on my laptop. But my question is what is the list of other programs i need installed on my pc and is there any crack to be installed?
I recall having to use a certain Java version. A version that is old enough to support this I think. I'm running everything in a virtual XP machine and everything in there is old ;-) Take a look here and see if you can find anything that can help you forward: drive.google.com/drive/folders/1vg04-wACHlzdp1Ku6enI-EMB43s6IgQB?fbclid=IwAR14MRL-q6f2DGEsmn95EWAIPjQViH5ckNLmOzovILIc__gq2I7BAOQRY7Y
@@TechCars thanks for the info, i noticed yours contain the saab bin files, 136, 146, 148, I'm running a 148 card on my tech 2, why do i need the others? Also do i have to have these files in a particular folder in my xp machine? Also why do i need a card writer file on my xp machine?
@@reginaldigweike4002 That drive is not mine actually. It's just a good place to find things :) The different PCMCIA files are somehow for different models, however in the 146 for example you could find the latter models as well. If you're doing 98-2012 my guess is that the 148 is the one to use. I've only used the 146 before I got the 148. The files is supposed to be on a PCMCIA card that you put inside your Tech2! That's why there's a card writer application as well. But for that you need a PCMCIA card writer..
@@TechCars thanks for that, please can i have what files you have on your laptop for tech 2 so i can compare to mine to be sure I'm not missing any files. This is for Tis2000 as that's what I'm running.
Hi. Thanks for the videos, they’re amazing. I got as far as the VIN verification but even though I already got the VIN from the car on the tech2, the VIN that pops up on TIS2000 is different. How can I change it or refresh it on the laptop?
It seems like the Tech2 hasn't been able to store the new VIN from your car, it still has the old one on the PCMCIA card. I wonder if it could have something to do with the PCMCIA card being defective. Do you have another one you can use?
@@TechCars Got it! I just went, reconnected it to the car, got the VIN again and then re-"pair"ed the tech2 to TIS and the VIN was correct this time. Got the access and followed your stuff to make all the adjustments I wanted. Awesome, thanks for not only the videos but also taking the time to respond back to me!
Det beror lite på vad man ska göra med bilen. Det är inte alltid som Tech2 kräver säkerhetsaccess. Du frågar bara en gång per bil och gång. Det ligger kvar tills nästa gång om du inte använt den med en annan bil.
Great video series. Bought a tech2 clone and this video helped me a lot to get the security access for my 2009 Saab 93 convertible. Struggled before seeing this. It is a great feeling to be able to set options that I want or even to be able to try different configurations. Thanks for posting.
Thanks for watching. Glad I could help. 😁👍
Thanks for the video. I managed to get security access using VirtualBox with Windows XP and TIS2000. Tech2 was connected to PC through an Aten UC232A USB-serial adapter using USB passthough.
I enjoy your videos greatly. I want to ask if you are sure about the 2009-2012 models requiring GlobalTIS. Just today I programmed a key for a 2010 9-3 Sport (9440) and after making the request to add a key, Tech2 said to connect with TIS2000. I used GlobalTIS and received Security Access 1 but I still wonder if TIS2000 will work. Thank you.
I don't belive TIS2000 is going to work. It will try, but it's not going to get security access I'm afraid.
@@TechCars Ok thank you.
Hello, Idk if you're still reading comments but I can't seem to purchase the correct cable to connect my tech 2 to my laptop(usb) as it doesn't have a db9.
Have you checked the tech2 wiki page?
@@TechCars yes, I've sorted it out! you're a real life legend for replying to comments in 2024.
"What was your experience'". Also the old 9-3 9-5 need a subscription for sps-
access. 1998 to 2003 models. I had a Tech2 but it was the worst nightmare
i had because this clones miss some electrical features the original have
built in. I tried to change some setting on even both the models but for the
auto-lock feature both models required sps-access. And the chinese clones
and their (stolen) software can't provide it. So i ended on a Autel MaxiSys D907.
And it works flawless. Extra subscription required.
Hi, not had chance to watch the whole video yet, so I apologise if you've explained this ~ I just have a quick question. Isn't there two types of security access? 1) You have to type the VIN number and gain security access for each individual car you wish to program. 2) Full security access that lets you program any car. I've already worked out this first option but can't find out how to get the unlimited security access. TIA
I havent managed to get secutiy access 2. Maybe you need to subscribe and use global tis for all model years?
Is security access a one time thing for your vehicle? Or do you need to plug the device into a laptop for each separate "security-sensitive" function you want to do with a tech 2 on your vehicle?
If you're just using the tool with one vehicle it will remember that VIN for the next time. If you use different cars you have to request security access again!
With GlobalTIS, mine somehow worked only once. Afterwards Tech2 has forgotten it. If I go to SPS section on Tech2 it displays different VIN number
It usually is recommended to plug power cable to the port on the communication cable for Tech2 and not directly to the Tech2 instrument (the VCI part of it) due to possible problems with VCI. Not sure why it is so, it was just recommended to me by multiple people working with Tech2 for years (the original equipment).
Good feedback. I have never had an issue with this. You mean 12v in the rj11 connector?
@@TechCars no no, if you check, the black cable that you plug the OBD adapter to it, has also a hole for electrical connector (in tech2 you get lighter cable, battery clamps cable or that house-plug cable). I was advised to use this hole to plug electric charge to tech2 so it's the closest way to resemble having charge from OBD, instead of plugging 12V directly to tech2 body. I was not fully explained why, but the advice sounded really serious, maybe at the old days when this equipment was used in official workshops, there existed some reason for it or advice from people repairing faulty tech2 or what.
Ahhh yes I've seen that connector. Thanks for the advice. I will start using that instead. Don't want to destroy it.
@@PeterChomanic
Hi, tech 2 was made with these options to power it, why don't you have a valid reason not to use the port on the body of the tech 2? Seems lame.
@@reginaldigweike4002 well, asi i said. Not sure why. But even people who repaired tech2 when had electrical issues told me that. Probably some route on the board is weaker or so?
Hej!
Jag har fått meddelandet key not accepted helt plötsligt.
Går inte längre öppna bilen med fjärrkontrollen heller.
Jag har bara en nyckel kvar.
Har ni något förslag på hur jag går vidare?.
Kan twice ha dött helt plötsligt eller är det något annat troligare fel ni känner till?
Jag har en Saab 2.0 t 9-5 från 2001.
Tacksam för svar!!
Om nyckeln är OK (gissar att du tom testat byta batteri i den) så kan det vara så att det är TWICE som trilskas eller gett upp. Här kommer ett tips. Hoppas det går dig i rätt riktning. www.saabcentral.com/threads/tech2-and-the-twice-unit.650746/
@@TechCars Tack så jättemycket. Ska kolla upp den där tråden. ❤️
Hi, is it possible to run globaltis for example 9-3ng -06 or is just working whit -08 and forwards. Just starting to learning tech2, love this channel. It’s great /Richard
Hi Richard. Thanks for the kind words. Yes you can use Globaltis for older Saab's as well. I just like to use the separate app TIS2000. The other one is a bit laggy in the web browser since it's using Java, but that's what you have to use if you have a 2009 and up. Good luck with your tech2 :)
SaabCars Thank you very much for the info, and keep up with the great work ☺️
Thank you very much for your great info. In my case, I have 1996 Saab 900 SE Turbo and I would like to add (program) two additional fobs. Currently only one is working well but my second fob is very weak. I need to almost the touch windshield of the car to open my doors. Do I need Tech 2 and such software for my car or can be program them differently? I have few old fobs taken previously from the junk yard from a different vehicles. Do I need new fobs to add the or can they be used from a different cars? Please let me know ween you are free of how to do it. Thank you very much for your time and help in this matter. S.F.
Yes you need a Tech2 to reprogram the TWICE module in the car for two more keys. I haven't done much Tech2 stuff with the NG900 though.
@@TechCars Thank you very much. I am in Canada and there is only very few Saabs on the road at this time. This is an excellent car and drives very well.
I have a 2001 and the anti theft came on how do I get car to start with tech2
Is there a special tis2000 for SAAB? I downloaded tis2000 and there is no security key to even try and get security access? Where can I get it from? Ive tried downloading it couple times from different places no luck!
It was a really long time ago that I downloaded Tis2000. It was at the forum SaabCentral. Check over there. I don't have the link right now..
My 03/11 9-3 will not allow me security access on Global TIS, The (Chinese) Tech2 actually is asking that security access via TIS2000. I suspect I might need to subscribe to SPS TIS. To program a new key. Can anybody help on this. Many thanks.
So im figuring out that I don't need a security access or a dongle for my Saab 9-3 1999 convertable. Should I take the Candii box out of the loop?
No you don't need the CANdi module :)
Hello Sir, i have tried it gives me
M259 please wait
M3025 Connecting to security Access server ! than
error E3324 Access to security access was denied.
please help, what i'm doing wrong. thanks and regards.
I have the same problem
it seems like the tech 2 is not connected to the pc
What to do when it pulls the wrong Vin? Not the generic xxxxxxxxxx0000 we backed out of this, but ever since we get a conflict with VINs during security access for other tasks. Any ideas? Searched high and low already before I asked. Thanks, the cars a NAO 2008 9-3 2.0T on TIS 2000
That is very strange. Never happened to me. What if you try and use GlobalTis instead of TIS2000?
@@TechCars I have only tried the Tech 2 on TIS as we have had it a week only, it looks as if the rrdm has the VIN that's in conflict and it cannot be removed in my vehicle with the tech 2. Is there anyone with info on how to remove the VIN, erase the eprom or any other Saab magic for me? 🤞
And it only refuses security access for certain functions.... We can still gain access to adjust the knock reduction.
Is it possible to make a guide for installing a new software version on the Tech2?
I have i 148.000ENG and would like to have the SWE version.
Havent found out how to...
Hi Andreas. There are two options here. If you can get your hands on an old laptop with a PCMCIA reader/writer you can copy the swedish .BIN onto it. The other way is going through the computer and some tech2 software. I think it takes ages to write a BIN file through the Tech2 onto the PCMCIA card. Do you have the swedish .BIN file?
@@TechCars yes i have the bin file.
Smart dident think of the reader thing.
Might have one in the junk pile at the office.
Thanks for the tip.
/En återfall Saab ägare i Malmö
@@Andreas-gi5om Grymt! Malmöbo här med ;-)
@@TechCars Såg det på din 9-5 film.
Själv blev det en 9-3 2.8T som nu fått nya kedjor och ny toppackning och en massa annat gott.
@@Andreas-gi5om Finfint ju! Det var ingen liten "fix". Gjorde du det själv?
hi, i tried to enable security access i get e 3150 error E3142 ONE/MORE VINS ARE IVALID. do you know why? tech 2 identifies correct vin no.
Which year model ?
2004
@@TechCars 93 arc
@@isaacmontes3857 Are you using TIS2000 or GlobalTis?
@@TechCars yes. First time security access enabled sucesfully but i tried to add aux audio then the system detects an error after that i couldn't enable security access
Do you need a Dongle to unlock security access on a 2008 9-3 using Tis2000 ?
Nope. No dongle needed. 👍👍
i have an 08 9-5(og)…. Can you confirm wether or not i will need to gain security access in order to adjust settings and clear errors?
No need for security access on the og95. 👍👌
@@TechCars what if i buy it used and it has precious owner’s VIN? Will i have to use TIS2000 or GlobalTIS to marry my vehicles vin to the tech 2?
To divorce or marry you only need the tech2. No tis2000 or global tis. 👌
i recently got my Tech2 but haven't really done much with it yet. ive been trying to do my own research on things but it all seems needlessly complicated.
one big question i have tho, that i haven't found any concise answers to is do you need security access for an 01 saab 9-3?
if not fantastic thats a big headache gone lol
if yes then what are some things that are locked behind it?
Hi. You only need security access for the NG9-3. (9440) You don't need it for the OG9-3 or OG9-5. It's just a hassle with it so you're lucky ;)
@@TechCars oh hecc yea, thats great to hear
Thanks for the very good quality video series.
I am in doubt whether I have messed something up as I downloaded a FIN .bin 136.000 to the TECH2 before I even once tried to get the security access.. TECH Wiki says never to update the software thru TIS2000 or it will brick the device...?
I bought an old laptop solely for this purpose and I run the TECH2 thru COM1 and the test says everything is fine. BUT. I have no security access (always implies an error that has occured) and it is telling me I have no access to handheld device as I try the TECH2 View.. Help?
Have you tried using a newer version like 146.00 or even 148.000?
@@TechCars I did upgrade the card to a 148,000 version but still I cant get the security access (Nor the view of the handheld device) for some reason..
@@t1mpetti Is it communicating OK? Could be the RS232 to USB adapter that is acting weird? The instrument work OK when connected to the car I guess? Reinstalling TIS2000?
Hi. Can you make a video explaining how to bleed the brakes on a 9-3 using the ABS bleed sequence int the Tech2? I have heard that it should be done if the brake pedal is soft and regular bleeding doesn't help.
Interesting. If I come across a 9-3 with a break issue I will do that. Thanks for the tip and thanks for watching!
Do you know if this is a possibility in the Tech2? I know it is possible on Vectra C, which has the same brakes as 9-3
@@dtrydal Good question. Need to check the menues in the Tech2. Can't say at the moment.
@@TechCars I now know that it was a broken ABS module that was causing the spongy brake pedal.
@@dtrydal Thanks for your feedback. Good to hear that you found the problem.
Hello! Thank you for the video. Can the Tech2 have security access to multiple vehicles? Or is one Tech2 for one car? I'm trying to do a CIM swap from an '05 9-3 Linear to an '05 9-3 Aero. I am using a Tech2 clone from China, and I've been able to "remove" the CIM from the Aero using the Tech2 clone. However, I could not "remove" a CIM from two other Saabs I tried ('04 Linear and '05 Linear). Each time Tech2 says to use TIS 2000, I've used TIS 2000 or GlobalTIS, and the TIS programs told me security access type 1 was granted, but once connected to the cars ('04 and '05 Linear), Tech 2 said to use TIS 2000 again. I'm wondering if this is an issue with all Tech2 tools, or just the clones from China. Thank you in advance for your help!
Hi. The Tech2 can have security access to multiple vehicles. That's my experience. I've been using mine on several NG9-3's. It's usually a new vehicle everytime. I don't know how many VIN's it can store on the card. Maybe it's related to a write error, when the Tech2 tries to save the new VIN it can't.. And then it doesn't remember it when connected to the car again.. A bit strange yes. Do you have access to another PCMCIA card?
@@TechCars Hello! Thank you for the reply! No, I only have one PCMCIA card. I thought about writing a new BIN file to it, but then I might mess something up and lock myself out of security access to the Aero (or all Tech2 functinality, I don't know).
I got some feedback from other Saab enthusiasts and they tell me that I can just physically disconnect the CIM from the junkyard car and then use the Tech2 to add it to my Aero. It appears that the remove function is for the benefit of other control modules in the car, not for the module (in this case, CIM) that is actually removed. Other modules must have updated bus lists - they must know that a part is missing so there is no conflict when the used module from another car is added. At this point this is only my hypothesis - do you know if this is actually the case?
@@grigoriy6516 I've never heard that you can use a CIM that isn't divorce, but maybe that's possible. It would be great, I guess you would need atleast one key that belongs to it.. Maybe someone else can pitch in here with that experience?
@@TechCars Hello Markus. I can confirm that a CIM does not need to be divorced from the donor car. However, the car receiving the CIM needs to have its own CIM divorced from it. My Aero now runs!
@@grigoriy6516 Thanks for sharing that. Great news that your car is up and running! :)
Hello Sir,
Do you know if this Tech2 with Globaltis will work for 2010 9-3 when I need to program new key fob?
Yes. You need GlobalTIS to request security access for your 2010 :) TIS2000 is good only up to 2008. Above 2010 I believe you also need subscription.
I’m not getting the security access icon did I do something wrong ?
Which program are you running? TIS2000?
Same here... Running TIS2000
Hello I'm considering to buy a Tech2 but I'm not sure how easy it is to download TIS2000 on an XP computer? I recently rebuilt the head cylinder of my 93 but the car is not working. It returns the code P0638 (throttle body) and I apparently need a Tech2 to reset the throttle body ?
I use a virtual Windows XP machine. Do you have a computer running only Windows XP? Do you have the installationprogram for TIS2000? Tech2 is handy to have when doing those type of jobs yes :)
SaabCars thanks for your answer. I was actually planning to buy a cheap laptop with XP as my current is windows 10. Before buying the Tech 2, I want to be sure that I will be able to have the security code. I just rebuilt the head cylinder ou 93 but the car seems to be in limp mode with code P0648 (throttle body). I need tech 2 to diagnose and setup throttle body.
@@gaetanperrier74 Which modelyear is your 9-3?
@@TechCars 2007 93 CONVERTIBLE 2.0T B207R
Then you should not have any problem using Tis2000 in your xp machine. 👍👍
Is there another tool more modern that I can use for programing my key and steering module? I tried to use cloned tech2 and even bought a XP laptop and couldn’t make it work.
Need security access to reset service indicator on 9-3. Just stupid.
Yeah. Wished they worked just like on the og9-5.
@@TechCars i have an 08 9-5…. Can you confirm wether or not i will need to gain security access in order to adjust settings and clear errors?
what about the Saab 900 NG 1994-1998? As far as I know they have the same ECU (T5-red cassette) as the 1997 and 1998 saabs. Do they need the same software and proceudure? has anyone tried learning a new key on these model years ?
Here's a great list of the different softwares that are available. www.tech2wiki.com/doku.php?id=wiki:which_.bin_files_are_available_for_tech2
The only SAAB model that need security access (that I'm aware of) is the NG9-3. The other ones don't. Best way to find out is if you browse through the menues in the Tech2. If you have 44.000 Card? BR Markus
@@TechCars Ok thanks alot. Ive downloaded all the saab softwares including tools to write them on a card. So i should be good. is it just finding the menue point "learn key" and then follow in structions ?
For the NG9-3 it was very straight forward. I've not had the possibility to try my tech2 on a ng900 yet. Best of luck.
Great Video ...
My doubt is next: seems like the Vin That shows on the TIS2000 is not the same Vin of the car, is this possible !? And why!?
Second question: When The TechII tells me to plug it out and connected to the computer, there is a problem on comunicación, what can possible be !?
Hi. The VIN showing in TIS2000 can be a VIN from a previous request that was not done to 100%. Maybe that's the case? Also, the communication issues are very often related to the RS232 to USB converter as you can see in my episode #10 of Tech2 for dummies. Thanks for watching!
I am having same issue with vin
@@Gmt400 Do you input the VIN of your car into TIS2000 in the Vehicle Context tab?
Hi, Im facing one problem. When Im connecting security access from tis2000, it doesn't show VIN window it only shows "Security access 3 enabled", not security access 1 or the vin part. What could help ?
Using tis2000, not global tis. After I get "security access 3 enabled" and trying to configure my car from diagnostic -> 2000 -> 9-3 -> all -> Engineering tool, it asks the security access code still
@@kimsoininen5902 Hi! For 9-3 model year 2000 you don't need security access.
@@TechCars How can I get past To engineering tool security part? I need To add Keys and I dont know otherway
Sir any idea how to do TIS approval on lumina 2008. Tnx and advance.
Hi. Have you tried doing it the same way as with the SAAB Cars?
No sir this is my first time to do the tis approval... On lumina
Hello how can i use tech 2 win with mdi device to make sigurite access with tis 2000 or global tis?
Hi. That's a really good question. Have you tried doing it the "old" way? What happens?
No i didn't tried but I want to know if MDI clone supports all protocol of saab
I have tech 2 win with Saab nao SW version 9.25 can I use for sps and sigurite access in here in EU?
I haven't testet it. The software has to support the models. Can you get any confirmation on that before you buy it? From a Hardware point of view I think you're fine.
Hi,i just bought tech2 from China and i have two saabs 1. 2006 9-5 tid 150 hp 2. 2003 95 150 hp.....Do they need security access also?? Thank`s
Hi. No. You only need security access for NG9-3. BR Markus
@@TechCars Thank`s for the quick answer.....Ha en fortsatt God sommer :-)
@@quo4ever1 Tack. Detsamma :)
@@TechCars hej i have some trouble to find and buy a new pcmia card! I try to get security access and i trampade i klaveret så nu behöver jag ett nytt. Have a laptop HP with XP and i am denied security access no matter what i try. Swedish living in France left car 9-3 2008 to a garage to marry a trailer module to it! Then i got a clone to start to do and learn myself but now i have runned out of ideas! And when i got the car back parking lights rear blinked rear wiper did not work and it drains the battery in a night, and windows live their own life one window can be down in the morning when i arrive to the car. But most important is the card where to find one have tried Amazon and now after 3 months still not delivered
Best Regards
jan.peter.vanhainen@gmail.com
@@wanis76 I've been working day and night here. Sorry for not responding earlier. Did something happen with the trailer module connector? Ground issue? +12V issue? Is the trailer module completely disconnected? Have you checked the connectors and wires?
BR Markus
Hello I have a tech2 scanner every time i start it i get ERAM fail what is (ERAM) and can it be fixed?
Hi. That is most likely something on the main board inside the Tech2 that is faulty. You might need to replace that.
@@TechCars hello i did all how you did but i have always error 3324 and 666 in Tis2000 what I need do?
@@triumphtwin1005 It might be the RS232->USB adapter that is not working correctly. I guess you are using one of those? Tech2 is very picky regarding that.
@@TechCars but I don’t put usb adapter i put in vga cable original with tech2
@@triumphtwin1005 You mean the serial cable? Is the settings correct with the COM port and speed?
mayb u should tell your viewers what type of lap top & year windows they will need to buy to communicate with the tech 2 .
Hi. I have a modern computer. but I run a virtual Windows XP machine. I have seen that some people use the Tech2 software even on Windows 10 machines, but my virtual XP machine work so good so I decided just to keep it :)
@@TechCars I have a windows 10 PC and I run an Oracle VirtualBox Manager so that I may use the Saab WIS.
Have you made a TH-cam tutorial video showing how I can load and run my TIS2000 software on this machine?
@@VinceBimbling Hi. No I have not done any video showing that :) I believe there were a few with TIS2000 installations last time I checked. Did you look them?
Hej
Jag hat ett litet problem som jag försöker fixa men hittar ingen lösning på nätet så hoppas du kan hjälpa mig
har tech2 med tis2000 men när jag försöker få säkerhets access så får jag ett meddelande att säkerhets acces nekades kod e3324 vad är det?
Det är med stor sannolikhet din RS232 till USB omvandlare som spökar.. Vilken använder du?
Den heter rs232 part icusb232pro köpte den från startech.com
@@thisistheway1766 Kan rekommendera dig att kolla på denna listan.. Tech2an är extremt känslig och väljer man inte "rätt" omvandlare så blir den förvirrad.. www.tech2wiki.com/doku.php?id=wiki:tech2_usb2serial_test_report
@@TechCars för att när jag trycker på säkerhet acces så ändras det i tech2 skärmen...det står download mode rs232 conection.. och sen efter 5 sekunder så får jag upp varningen e3324 jag förstår inte hehehe 🤯
@@thisistheway1766 Det brukar bli så när omvandlaren börjar kommunicera, men kan inte slutföra kommunikationen. Tips är att prova med en som är godkänd.
Hello Pal, finally I was able to get the security access ... but how many types exist, coz seems like I got Security Access Type 1 ... can I do everything with this type of access !?
You get the level required for the things that you want to do with the car. If Level 2 or 3 is necessary you should be able to get this as well. I've never been refused security access up until 2010. There you need to have some kind of subscription.
Hi Bernado, please how did you get security access on tis2000? I'm having problems with mine, it communicates with my tech 2, but keeps coming up with errors and doesn't upload my vin from the car to my laptop.
@@reginaldigweike4002 hello there, sorry for this late reply... well Tis2000 takes ages to read the info, instead i used global tis and worked pretty well, after using the global tis some how tis2000 read the data.(in fact using global is more friendly than tis2000, try it on ...
@@lribernardoantharrodriguez8501 does global tis need a crack and security code to work? That's what put me off installing.
Reginald Igweike hi, the one I have does not. What sort of errors do you have !? What exactly do you do when you connect the TechII to your car!? And after!? Cables are ok !?
Suverän genomgång! Har precis skaffat en Tech 2 klon. Nu ska jag bara se om jag lyckas hitta en dator med XP som op sys.
Gott o höra! Eventuell en virtuell maskin med XP på en nyare dator bör ju också funka. Själva XP 'cd-skivan' är kanske svårare att hitta?
The TIS 2000 I got with my Tech 2 is missing the Security access option lol
That sounds weird. Never seen that. Have tried reinstalling?
I also have that problem and reinstallation did not help.
I had the same problem when I installed the software from CD, however I found a version online that worked ~ I can't remember the link but do some digging on a few Saab forums and something should show up.
@@JMCortinax Ok Solved it!
I´ve installed Global TIS (for my 2001 9-3 CV) and was able to get security Access!
www.saabcentral.com/forums/showthread.php?t=675018
Heres how to do it, if you can´t find the link for the Global TIS download I am more than happy to help you guys
And reinstalling does not work, it´s just bad software I guess
Thanks for free education. We need people like you in the world to help each other. That creates love . God blesses those who creates love in humanity. We are all children of one God. Am I right my fellows..?
God bless you, Sir for devoting your time.
My question is regarding 2003 Saab 95 Arc V6 turbo. Cyl 1 shows knocking in thousands. I changes timing belt 8 years ago at 64000 miles. Did not have Tech2 than. Recently got one and found this problem. I have done about 50,000 miles since than. May be I messed up the proper location of dots on the cam pullies etc....(a little bit). Please advise other possible reason and fix. It is only Cyl.1. Thanks to all helpers, May God bless us all.
Hi, hope someone can answer this - I have a 08 9-3 1,9 with a ECU thats damaged/dead and the car obviously wont start. I got a used ECU that matches the broken one with the intention of cloning the damaged one, but my question is, will a tech2 + candi + tis2000 let me marry the used ECU to my saab (as a new ECU without the data from the dead one?
Normal process is to switch out the T8 unit and add it to the car in the TEch2. For this you need to have security access. For 03-07 you get this with TIS2000. See this: th-cam.com/video/p4JbHSR6FMg/w-d-xo.html ---- I assume from this video that for 2008 to 2010 you can use GlobalTIS without a license/subscription to add a new ECU. For 2011-2012 he commented you need a license/subscription from GM.
tja funkar tech2 tillSaab 9-3 2002?
Jajamensan! Det gör det !
Nice video, please can you direct me if I'm missing something, i have had my tech 2 over a year, saab 93 2005 and tis2000 on my xp laptop, still struggling to get security access to add and remove modules. People say i need java 6 to be installed on my laptop. But my question is what is the list of other programs i need installed on my pc and is there any crack to be installed?
I recall having to use a certain Java version. A version that is old enough to support this I think. I'm running everything in a virtual XP machine and everything in there is old ;-) Take a look here and see if you can find anything that can help you forward: drive.google.com/drive/folders/1vg04-wACHlzdp1Ku6enI-EMB43s6IgQB?fbclid=IwAR14MRL-q6f2DGEsmn95EWAIPjQViH5ckNLmOzovILIc__gq2I7BAOQRY7Y
I double checked my Java version in the XP virtual machine and it's version 6, update 12, build 1.6.0_12-b04
@@TechCars thanks for the info, i noticed yours contain the saab bin files, 136, 146, 148, I'm running a 148 card on my tech 2, why do i need the others? Also do i have to have these files in a particular folder in my xp machine? Also why do i need a card writer file on my xp machine?
@@reginaldigweike4002 That drive is not mine actually. It's just a good place to find things :) The different PCMCIA files are somehow for different models, however in the 146 for example you could find the latter models as well. If you're doing 98-2012 my guess is that the 148 is the one to use. I've only used the 146 before I got the 148. The files is supposed to be on a PCMCIA card that you put inside your Tech2! That's why there's a card writer application as well. But for that you need a PCMCIA card writer..
@@TechCars thanks for that, please can i have what files you have on your laptop for tech 2 so i can compare to mine to be sure I'm not missing any files. This is for Tis2000 as that's what I'm running.
my tech2 wont get the vin number from my car any ideas
Hi. Which model and model year?
@@TechCars 1999 9-5 sorry i took so long and i have the 1.4 software on the tech 2
@@owenaero Maybe if you try a newer card? The one I have is the 148.000 and it's working great!
@@TechCars yes mine is the 148 and it's not a china knockoff
@@owenaero The OG9-5 1999 don't need security access. Is that what you're trying to do?
Do you have to pay to.get the severity access?
For the my 2011-2012 you need to buy subscription. Below that no, not that I'm aware of.
@@TechCars okay thanks! I have a 2005 9-3. I will go ahead and buy it then. Do you have a recommendation on where to buy from?
@@TechCars I got it from here, fast shipping as well, got it 2 days ago
www.obdii365.com/wholesale/tech2-diagnostic-scanner-with-tis2000.html
@@TechCars
Hi, can one use TIS 2000 on Windows 7 computer to get security access?
Back in the day I never got it to run on windows 7. I'm still running everything in a virtual windows xp machine.. 🤓
Hi. Thanks for the videos, they’re amazing. I got as far as the VIN verification but even though I already got the VIN from the car on the tech2, the VIN that pops up on TIS2000 is different. How can I change it or refresh it on the laptop?
It seems like the Tech2 hasn't been able to store the new VIN from your car, it still has the old one on the PCMCIA card. I wonder if it could have something to do with the PCMCIA card being defective. Do you have another one you can use?
@@TechCars Got it! I just went, reconnected it to the car, got the VIN again and then re-"pair"ed the tech2 to TIS and the VIN was correct this time. Got the access and followed your stuff to make all the adjustments I wanted. Awesome, thanks for not only the videos but also taking the time to respond back to me!
I'm glad it worked out. Best of luck. Keep Tech2ing 😁😊👍
behöver man security acces varje gång man ska använda tech 2 på en ng 9-3a
Det beror lite på vad man ska göra med bilen. Det är inte alltid som Tech2 kräver säkerhetsaccess. Du frågar bara en gång per bil och gång. Det ligger kvar tills nästa gång om du inte använt den med en annan bil.
Lol I bought a tech 2 for no reason. I have no idea how to do this
Interessted in selling ?
@@thecostello9320 the car blew up on me so I sold the tech awhile ago
so.confusing
What if my tis2000 doesn't show the saab eng 148bin?