Changing the tie rod end on my Peterbilt 359! If you enjoyed the video please leave a like and subscribe for more content! ↓↓↓Instagram↓↓↓ / dirtbrutesteve #DirtBrute #Peterbilt #Peterbilt359
Being certified mechanic for over 38 years, this video shows you (HOW NOT) to do things! SMDH! using Needle nose Vice-Grips??? To pull out a carter-pin? Using a big Cresent wrench to break loose a tie-rod nut? Then he uses a chrome 12 point socket? While using an impact gun???🤦🏻🤦🏻🤦🏻 I bet if you ask him how big his tool collection is? He could probably carry it with one hand,??? and it's probably a retired fishing tackle box!...😂🤣😂🤣
😂 Fishing tackle box. You’re a funny guy. It would only be an insult if I was a 38 year certified mechanic. But I’m not making fun of what I have for tools would be like me making fun of you For using a shovel instead of using an expensive excavator. Typical “certified”mechanic . Do you know what is funny though? it’s not a how to video and I took it to get it inspection sticker after. Passing! So congratulations you poked fun at somebody for getting by with what they had and getting the job done👏👏
@@DirtBrute Yeah if it makes you feel better ? If your going to put a video out make sure you teach people by doing it the right way with the right tools! You ever admitted that your just lazy so it wasn't like you were stuck in the middle of the Desert without any tools? And you had to call in your buddies to get you off the hook! So yea pat yourself on the back but people know the truth that your just a Want to be mechanic. Who does stuff half-ass!
@@robertbenavidez7164 i’m not sure what you came here for this is not a teaching channel. I have no interest in being a mechanic I have no interest in being a mechanic this is a Vlog style channel not a how to . Either way thanks for stopping by Just to be a dick
Did you get your certification from the bottom of a cereal box? Its cotter pin dumbass, don't try to criticize someone on their work when you don't even know the right name of stuff. Remind me not to get anything repaired by this guy. 🤣
Driving clip at the end . Very cold 🥶 day
Wow! You really surprised me on the second day start, I thought you’ll never be able to get that socket off of that nut
Yeah the camera died so I stopped the job and picked up up the next day . Im in no hurry
Thanks bro. Some newby broke down in the yard and got the cab moving from this.
Awesome ! Thanks for watching!
Nice video amigo and nice truck..
Thank you
Used air impact socket 33mm o 1/5/16
I did have before with air gun where the truck was parked! But I will soon . Thanks
@@DirtBrute bbq
Cl
If the driver side is LH so the Passenger side going to be RH ?
@@mikunikumeww9630 only with the old bud studs
dont count the threads. you measure from center to center on the top side for exact measurement
I ended up marking the tires then measuring the front and back . Truck Drives perfectly straight👍👍
I greased the truck today and I discovered that my tie rod is loose.
Should I replace both even if only one is bad?
That’s up to you I only replace the one that was bad on mine . You’ll probably want to take it to get it aligned after
both do them at once
Why dont you use a screwdriver and a hammer
For what ?
I won’t recommend this slamming with hammer you damaged the suspension and issue getting worse,
The issue is being replaced with new . I wouldn’t exactly call, banging a socket, and a wrench slamming the suspension.😂
Being certified mechanic for over 38 years, this video shows you (HOW NOT) to do things! SMDH! using Needle nose Vice-Grips??? To pull out a carter-pin? Using a big Cresent wrench to break loose a tie-rod nut? Then he uses a chrome 12 point socket? While using an impact gun???🤦🏻🤦🏻🤦🏻 I bet if you ask him how big his tool collection is? He could probably carry it with one hand,??? and it's probably a retired fishing tackle box!...😂🤣😂🤣
😂 Fishing tackle box. You’re a funny guy. It would only be an insult if I was a 38 year certified mechanic. But I’m not making fun of what I have for tools would be like me making fun of you For using a shovel instead of using an expensive excavator. Typical “certified”mechanic . Do you know what is funny though? it’s not a how to video and I took it to get it inspection sticker after. Passing! So congratulations you poked fun at somebody for getting by with what they had and getting the job done👏👏
@@DirtBrute Yeah if it makes you feel better ? If your going to put a video out make sure you teach people by doing it the right way with the right tools! You ever admitted that your just lazy so it wasn't like you were stuck in the middle of the Desert without any tools? And you had to call in your buddies to get you off the hook! So yea pat yourself on the back but people know the truth that your just a Want to be mechanic. Who does stuff half-ass!
@@robertbenavidez7164 i’m not sure what you came here for this is not a teaching channel. I have no interest in being a mechanic I have no interest in being a mechanic this is a Vlog style channel not a how to . Either way thanks for stopping by Just to be a dick
@@DirtBrute Your welcome, just call me Richard. 👍🏻
Did you get your certification from the bottom of a cereal box? Its cotter pin dumbass, don't try to criticize someone on their work when you don't even know the right name of stuff. Remind me not to get anything repaired by this guy. 🤣