How to Solder Stained Glass Panels - Part 1
ฝัง
- เผยแพร่เมื่อ 15 ก.ย. 2010
- Learn how to solder stained glass panels. Delphi artist and class instructor Steena Gaut goes over the basic steps and gives helpful tips on how to achieve smooth and consistent soldering lines. Close-up video shots of her work make it easy see how these techniques are done. bit.ly/p9CYJ4
DelphiGlass.com is home to stained glass, mosaics, fusing and other unique crafts. To see tools featured in this video, please follow this link: www.delphiglass.com/stained-gl... - แนวปฏิบัติและการใช้ชีวิต
I've watched about a dozen soldering videos, but this is the first one that has taken the time to explain things like angles and grips. As a beginner, it improved my soldering in minutes. Thank you.
I'm glad you found this useful. Thank you for the feedback and good luck on all your projects.
I completely agree! Thanks for the great tips!
This is by far the most helpful video I have found on this. Can't thank you enough!
OMG! The one simple tip to hold the tip upright, not flat has made all the difference in the world! I have watched countless videos and have gotten so frustrated that I can't get a bead, because they all omit to mention that one "little" thing Thank you!
I am new to the craft and I have even reached out to local stores around me that do stained glass art and I have NEVER heard about holding the tip upright so I always hold it flat and now that I watched this video, I tried it upright and it has made ALL THE DIFFERENCE.
Has it really been a decade? :D
Steena Gaut has such a kind voice, her suggestions are so down-to-earth... but don't be fooled, dear viewer, this is a master at work sharing her insights.
The way she twists and turns as she paints the solder onto the glass with such aplomb is a wonder to behold. She makes it look so easy that I have to keep reminding myself that I am many moons away from being able to do this... but boy oh boy, she sure makes it tempting to give it a try.
Thank you so much... 11 years since you did this, but thank you!
As others have commented, this so far has been the best tips on soldering. Informative, detailed and brief. 👍
Didn't know about vertical and horizontal position make a difference and pulling it off onto the glass. I always struggle with sharp points when I stop.
Best on TH-cam. Great job.
Thank you for the high praise! We will make sure to pass on your compliments to our instructors. And happy glass crafting!
Thank you!!! Short and very informative. Keep up the great tutorials!
The most helpful soldering video I have ever seen. Thank you so much for such clear demonstrations and explanations. I've been having an awful time with my soldering & had no idea why. Learning how the tip should be angled is going to make a world of difference
What steady hands and amazing work !!
Easy-peasy! Thank you for the great instruction!!
Thank you! We will make sure to pass on your compliments to our instructors. And good luck on all your glass craft projects!
I've been doing wrong all along...Thank YOU for putting out all these very informative videos!!
You're welcome. I'm glad you've found it helpful. Let us know if you need any further help.
It never dawned on me to tilt my soldering iron. I've been working on some ornaments, and now, with your help, the beading looks more professional! Thanks!
Short and sweet, I LOVE it. Thanks!
WOW. You make it look so easy!
This was perfect! So easy to follow along 🙌🏻
Like silk. Very nice work.
Good tips-- thank you!
Thank you!! Very helpful.
This is a great video! What is that board made out of that the thumbtacks are stuck into?
Thank you!! This really helps me
Thank you for taking the time to make teaching videos. Can you tell me how I can attain a copy of the pattern you are using.
So very helpful!!!!
Very nice video. Helpful
You make it look insanely easy!! I tried stained glass soldering for the first time and it was a huge struggle and the final product looks super messy. Realizing I made a lot of mistakes, not using the right tip wrong angle, and not priming the tip so the melted solder slides off. I will have to keep trying when I decide to do another one.
We all start out as beginners. ;)
oh thank you for this!!! that flat is off and upright makes the bead basic solder 101... THAT'S what I was missing. 🤦🤦🤦🤦
hay that clever stuff never seen that done before i like it . i take it that lead under what your soldering on to by the way what wattage is the iron your useing
100w
Wisconsin?
Thank you for this instructional video. But, the whole time I was thinking of Fargo, yeah, you betcha, don'tcha know?
🗣 awesomeness
Hi I noticed a couple of white spots appear in my finished piece. Does that mean the iron was too hot or solder overworked? Is there a way to fix it?
Thank you for taking the time to watch our video. To this sounds like oxidation, not an issue from the iron or solder. To remedy this you need to neutralize the project with a flux remover. CJ’s or NeutraClean needs to be lathered for 2-3 minutes on the project to neutralize the acid left behind from the flux and then rinsed with water. The other flux remover we carry is called Kwik-Clean. This can be sprayed then let sit on the piece for 1-2 minutes, then it can be wiped off. No water needed with that product. I think this will solve your issues you are seeing with white spots.
Hello! The Weller W101 100w Iron will be sufficient for similiar project? or should I get a higher wattage?
That is what you need.
where can I get the materials for that?
+Paco The stained glass supplies seen in this video can be purchased on our website by clicking on the following link: www.delphiglass.com/stained-glass-supplies/. The glass can be found here: www.delphiglass.com/stained-glass/.
what are the qualities of the soldering iron used here? is a 100 watt iron sufficient?
Yes, it is.
Does the iron heat the glass joint? Or just melt the roll of 60/40 lead/tin?
You are just melting the solder. If the iron is held in one place to long the heat will cause the glass to break.
I have a stain glass panel 29x27
I need to solder 2 eye lets at top of piece to hang. What do u recommend?
You can buy metal wick that removes extra solder once heated instead of cleaning the tip and dipping multiple times. Much quicker.
good advice, soldering is the thing i have most trouble with :(
How many watts for the soldering iron?
100w
get some rosin flux paste and cover the joints before you solder.
you'll get incredibly shiny solder joints.
youll have to wash it off after with alcohol
Jenis soldernya seperti spa
انا بشتغل زجاج معشق برصاص اسلامى قبطى وايطالى وزخارف وكريستال وبدور على شغل انا من مصر
Everyone shows techniques but no one tells you the temp your soldering iron should be! 🤦♀
Any tips for people who can't get the sauder to stick no matter what? I'm starting to believe it's all special effects and nobody can actually do it. Lol
Make sure you have flux and enough. Its a fine line thought if you have to much it will pop like bacon grease in the pan. But without it solder will not stick.
Nice! But this shit is toxic use a mask 😷